Smooth & Silky WSF5060 - Electric razor REMINGTON - Free user manual and instructions

Product type	Electric shaver for women
Brand	Remington
Model	Smooth & Silky WSF5060
Power source	2 AAA batteries (alkaline, included)
Use	Dry and in the shower
Shaving head	Flexible, with hypoallergenic foils
Included accessories	Bikini trimmer guide, flexible trimmer, cleaning brush
Massage band	Yes, integrated
Shaving areas	Legs, underarms, bikini line
Cleaning	Rinse with warm water and brush
Maintenance	Oil the foils and blades regularly
Blade replacement	Every 6 months (foils and blades)
Spare parts available	Yes, at remington-europe.com
Safety	Do not immerse, do not use if damaged
Recycling	Do not dispose of with household waste

Frequently Asked Questions - Smooth & Silky WSF5060 REMINGTON

How to insert batteries into the Smooth & Silky WSF5060 shaver?

Make sure the shaver is turned off. Turn the battery compartment a quarter turn counterclockwise and remove it. Insert 2 AAA batteries observing polarity (+/-). Replace the compartment aligning the marks and turn clockwise until it clicks.

Can I use the shaver in the shower?

Yes, the shaver can be used in the shower. However, do not fully immerse it in water and do not rinse it at a temperature above 70°C.

How to clean the shaver after use?

Turn off the shaver. Open the shaving head by pressing the release button. Blow to remove residues, then brush or rinse away accumulated hairs. Leave the head open for complete drying.

When should the foils and blades be replaced?

It is recommended to replace the foils and blades every 6 months for optimal performance. Signs of wear include irritation, pulling, and visible wear.

How to use the bikini trimmer guide?

The bikini trimmer guide allows you to trim and shape contours. Hold the shaver perpendicular to the skin and gently press downwards for a precise result.

Can the shaver be used dry?

Yes, for dry shaving, make sure the area is clean, dry, and free of cream or oil before use.

What to do if the shaver does not work?

First check that the batteries are inserted correctly observing polarity. If the problem persists, the batteries may be drained. Replace them with new AAA batteries.

How to maintain the foils and blades to extend their lifespan?

Regularly apply a drop of sewing machine oil to the foils and blades. Clean them after each use and replace them every 6 months.

Is this shaver suitable for sensitive skin?

Yes, the foils are hypoallergenic. However, if you have sensitive skin or allergies, it is advisable to test the shaver on a small area before first use.

How to recycle the shaver at the end of its life?

Do not throw the shaver in household waste. Remove the batteries and take the device to an appropriate collection center for electrical and electronic waste.

USER MANUAL Smooth & Silky WSF5060 REMINGTON

Battery Operated Ladyshaver

WSF5060

Thank you for buying your new Remington® product. Please read these instructions carefully and keep them safe. Remove all packaging before use.

IMPORTANT SAFEGUARDS

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised.
• Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
• Do not use attachments other than those we supply.
• Do not use the appliance if it is damaged or malfunctions.
• Do not use this product if it is not working correctly, if it has been dropped or damaged, or dropped in water.
• This appliance is battery operated only.
• This product uses alkaline batteries. At the end of their life the batteries must be removed from the appliance and be recycled or disposed of properly in accordance with your state and local requirements.
• Do not put in fire or mutilate your batteries when disposing as they may burst and release toxic materials.
• Do not short circuit as it may cause burns.
• Turn off when cleaning or applying oil.

PARTS

1. Head assembly
2. Head release button
3. On/off switch
4. Hypoallergenic flexing shaver foil

5. Bikini trimmer comb guard

6. Flexible trimmer

7. Battery compartment
8. Massage strip
9. Cleaning brush (not shown)

GETTING STARTED

Be patient when first using your lady shaver, as with any new product, it may take a little while to familiarise yourself with the product. Take the time to acquaint yourself with your shaver, as we are confident you will receive years of enjoyable use and complete satisfaction.

INSERTING BATTERIES

• Your shaver requires 'AAA' alkaline batteries (first set included).
  Make sure the product is turned off.
• Rotate the battery compartment cap approximately 14 turn anti-clockwise then pull off.
• Insert 'AAA' alkaline batteries, so that the (+) and (-) marks on the battery face the same mark in the battery compartment.
• Place cap back on unit using the alignment marks and rotate clockwise until the cap snaps into place
  NOTE: Your shaver will not work if the batteries are inserted incorrectly
  NOTE: Remove the batteries if the unit is not in use for long periods.

INSTRUCTIONS FOR USE

Your lady shaver is suitable for legs, underarms and the bikini area. It can be used dry or in the shower.

FOR REGULAR SHAVING

• Switch the shaver on.
• Hold the shaver at a right angle to your skin and move the shaver against the direction of the hair growth.
  After shaving, turn the shaver off.
  NOTE: Before dry shaving, ensure the area is clean, dry and free from creams or oils.

TRIMMING AND SHAPING

• Attach the bikini trimmer attachment.
• Hold the shaver at a right angle to your skin and press down gently.
• Edge and shape the areas as desired.

FOR BEST SHAVING PERFORMANCE

• We recommend that you use your new shaver daily for -3 weeks to allow time to find the optimum shaving methods for your particular type of hair growth patterns.

CAUTION

• If your skin is easily irritated by shaving or you suffer from skin allergies, you should test a section of your arm or leg before using the shaver.

To ensure long lasting performance of your shaver, clean the head assembly regularly. The easiest and the most hygienic way to clean the shaver is by rinsing the shaving head after use with warm water.

AFTER EACH USE

• Ensure the shaver is turned off.
• Press the side release button to slip open the head assembly.
• Blow any loose debris from the foil.
• Brush or rinse any accumulated hair from the main body of the shaver, head assembly and cutter assembly.
• Leave the head assembly open to allow the shaver to dry completely.

NOTE

• The lady shaver is suitable for use in the bath or shower.
• Do not rinse with water hotter than 70^ C .
• Do not completely submerge the lady shaver in water.
• Ensure that the lady shaver is turned off when cleaning.
• Do not clean the shaving foils with the brush.
• At regular intervals, put a drop of sewing machine oil onto the foils and cutter heads.

REPLACING YOUR FOIL AND CUTTERS

• To ensure the continued highest quality performance from your shaver, we recommend that the foil and cutter are replaced every 6 months. These can be obtained from our nearest Remington* Service Centre.
  Signs that your foils and cutters need replacing.
• Irritation: as foils get worn, you may experience skin irritation.
  Pulling: as the cutters wear, your shave may not feel as close and you may feel the cutter pulling your hair.
• Wear through: you may notice that the cutters have worn through the foils.

TO REPLACE THE FOIL

• Ensure the lady shaver is switched off.
• Remove the foil assembly by pressing the release buttons on either side of the head and lifting the foil assembly upwards.
• Replace the foil assembly by aligning it with the body of the shaver then clicking it into place.

CAUTION

• Only hold the plastic to prevent damage to the foil.
• Do not press on the foil when replacing.

GB

TO REPLACE THE CUTTERS

• Ensure the shaver is switched off and open the head assembly (as above).
• To remove cutter, grasp cutter between the thumb and forefinger and pull upwards.
• To reassemble cutter, place cutter onto the oscillator tip. Gently push down clicking into position.

RECYCLING

To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate official recycling/ collection point.

UW APPARAAT VERZORGEN

REPLACEMENT D'UNE GRILLE

REEMPLACEMENT DES LAMES

g a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

/pcie 1

Remington® is a Registered Trade Mark of Spectrum Brands, Inc.,

or one of its subsidiaries

VARTA Consumer Batteries GmbH & Co. KGaA, Alfred-Krupp-Str. 9, 73479 Ellwangen, Germany

www.remington-europe.com