Fritz SUOB722 - Wristwatch SWATCH - Free user manual and instructions

Product Type	Wristwatch
Brand	Swatch
Model	Fritz SUOB722
Category	Analog watch
Display	Hands (hours, minutes, seconds)
Functions	Time, date, day, alarm, Loomi lighting, Touch function, game, rotating Scuba bezel
Time setting	Crown in position C, turn slowly for minutes, quickly for hours
Date and day setting	Crown in position B, counterclockwise for date, clockwise for day
Alarm	Touch alarm, adjustable via crown, demonstration by long press
Lighting	Loomi: tap lightly on the watch to turn on
Touch function	Press for random game or display alarm time
Rotating bezel	Scuba: unidirectional rotation for elapsed time measurement
Water resistance	200 meters (Scuba 200 Chrono) – not a professional diving watch
Power	Battery
Case	Material not specified, typically plastic or steel
Strap	Interchangeable, silicone or textile material
Case dimensions	Approximately 38-41 mm in diameter (estimate)
Weight	Approximately 40 g (estimate)
Care	Rinse with fresh water after immersion in salt water
Repairability	Battery replacement possible by watchmaker, interchangeable strap
Warranty	Consult retailer

Frequently Asked Questions - Fritz SUOB722 SWATCH

How do I set the time on my Swatch Fritz SUOB722?

Pull the crown to position 2 (C). Turn it slowly to correct the minutes, quickly for the hours. Push the crown back to position A to finish.

How do I set the date and day?

Pull the crown to position B. Turn it counterclockwise to set the date, and clockwise for the day. Push the crown back to position A.

How do I use the alarm?

Press the crown to switch between ON and OFF. Pull the crown to position 1, turn it (slowly for minutes, quickly for hours) to set the alarm. Push back to activate. Press the crown for 2 seconds to test.

Why do my hands not show noon/midnight during the test?

If the hands do not point exactly to noon/midnight after a 5-second press on the crown, they need to be adjusted. Pull the crown to position 2, turn it clockwise for the hour hand, counterclockwise for the minutes. Then push back.

How do I turn on the Loomi lighting?

Tap lightly on your Swatch. The Loomi function lights up to illuminate the dial. This works only on models equipped with this function.

How do I use the Touch function?

Press on your Swatch to start the game: the hands rotate around the dial and stop randomly. The time is then redisplayed. A long press (~4s) displays the alarm time.

How do I use the Scuba bezel to measure elapsed time?

Place the bezel marker opposite the minute hand. The duration is read under the minute hand on the bezel. Important: rinse with fresh water after use in the sea.

What is the water resistance of the watch?

The watch is water resistant to 200 meters (Scuba 200 Chrono). It is not a professional diving watch. Rinse with fresh water after immersion in salt water.

How do I change the battery?

Battery replacement should be done by a qualified watchmaker to maintain water resistance. Open the case back with a suitable tool and replace the battery with one of the same type.

What to do if the hands do not display ON/OFF correctly in alarm mode?

If the hands do not correctly indicate ON or OFF, the Touch Alarm function needs to be set again. This can happen after a shock or battery change. Follow the alarm setting procedure.

USER MANUAL Fritz SUOB722 SWATCH

A: Normal position of the crown
C: Position for setting the time

To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

TOUCH/FUNSTANDARD

To set the time, pull the crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting has been completed, push the crown back.

DATE OR DAY SETTING

STANDARD

To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.

READJUSTMENT

TOUCH/FUN

ADJUST HAND/+HOUR

ADJUST HAND/+MINUTES

Push crown for 5 seconds. If both hands go to 12 o'clock, test is ok. Push crown again and hands go back to time.

If hands are not exactly at 12 o'clock, pull crown to position 2. Turn clockwise to readjust hour hand. Turn counter clockwise to readjust minute hand. Push crown back and hands turn back to show time.

LOOMI FUNCTION: DISPLAY

TOUCH LOOMI

TOUCH YOUR SWATCH

LOOMI ON

LOOMI

LIGHT FUNCTION

POP

POP-IN

POP-OUT

POP ON CLOTHES

Note: Wear your Swatch simply with its band or try „popping" it directly onto your clothes.

TOUCH ALARM

SHOW ALARM TIME

4 secs.

Touch your Swatch.

Hands move to show alarm time for approx. 4 seconds.

STOP ALARM

Touch your Swatch to stop alarm.

ALARMON/OFF

...CHANGE ON/OFF

SHOW LAST ALARM

...SET NEW ALARM

GO

Switch alarm on/off and set alarm time Press crown and hands go to actual mode on or off.

Press crown again to change mode.

Pull crown to position 1 and the hands go to the last alarm time.

To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours).

Then push crown back and hands turn back to time and alarm mode will be "on".

ALARM DEMO

Press crown for 2 seconds to start alarm demo.

To stop, press crown again.

IMPORTANT: When the hands do not show correctly ON-OFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock).

TOUCH GAME

Touch your Swatch.

Hands come together at 12 o'clock and start to rotate at least on full turn.

IMPORTANT: If hands are not exactly at 12 o'clock, they have to be readjusted.

4 secs.

Hands stop by accident and show the result of your game for some seconds... ...then, hands turn back to time.

SCUBA FUNCTION: ELAPSED TIME

Using the adjustment ring

For setting the start time and duration of an activity, line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustment ring.

WARNING NOTE

IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.

CAUTION: The Irony Scuba 2OO Chrono is not a professional diving watch.

ZEIT EINSTELLEN

TIPPEN SIE AUF IHRE SWATCH

LOOMI GEHT AN

LOOMI

BELEUCHTUNG

POP

LOOMI-FUNCTIE: SCHERM

TOUCH LOOMI

RAAK JE SWATCH AAN

LOOMI ON

LOOMI

LICHT-FUNCTIE

POP

ERIN DRUKKEN

UITWIPPEN

AAN KLEDING BEVESTIGEN