C4477 - Watch Candino - Free user manual and instructions

Technical Features	Analog watch with quartz movement
Case Material	Stainless steel
Case Diameter	40 mm
Glass Type	Mineral glass
Water Resistance	50 meters (5 ATM)
Strap	Genuine leather
Usage	Ideal for daily use and formal occasions
Maintenance	Battery replacement recommended every 2-3 years
Safety	Do not expose to strong shocks or extreme temperatures
General Information	2-year warranty against manufacturing defects

Frequently Asked Questions - C4477 Candino

How do I set the time on my Candino C4477 watch?

To set the time, pull the crown to the first position and turn it clockwise or counterclockwise to adjust the time. Then push the crown back to its place.

Is my Candino C4477 watch waterproof?

Yes, the Candino C4477 is waterproof up to 50 meters. This means it can withstand splashes and rain, but it is advised not to use it for swimming or diving.

How do I change the battery of my Candino C4477 watch?

To change the battery, it is recommended to entrust your watch to a professional watchmaker to avoid damaging the mechanism.

What should I do if the strap of my watch is too big?

You can adjust the strap by removing links. This can be done by a professional or with an appropriate tool if you are comfortable doing it yourself.

How do I clean my Candino C4477 watch?

To clean your watch, use a soft, dry cloth. Avoid chemicals and prolonged exposure to water.

What should I do if my watch is not working?

Make sure the battery is charged and the crown is properly pushed in. If the watch still does not work, contact a professional for a check-up.

Does the Candino C4477 watch have a warranty?

Yes, the Candino C4477 watch generally comes with a one-year warranty against manufacturing defects. Check your manual for more details.

Where can I find spare parts for my Candino C4477 watch?

Spare parts can be ordered from authorized Candino dealers or directly on the brand's website.

USER MANUAL C4477 Candino

Description of the display and control buttons 16
Chronograph:Basic function. 17
Chronograph:Accumulated timing 18
Chronograph: Intermediate or interval timing. 19
Adjusting the chronograph hands to zero position 2D
Setting the time 22
Setting the date [quick mode] 23
Setting the time, date, day of week and month 24

By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making products must be selectively collected for processing. You may therefore dispose of your quartz

watch making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and protecting our health.

DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Display elements

16

CHRONOGRAPH: BASIC FUNCTION

[START/STOP/RESET]
Minute counter Second counter

% second counter

Push button B

Example:

Start:Presspush按钮A
Stop: to stop the timing, press push button A once more and read the 3 chronograph counters: 4 min/5 sec/70 sec
Zero positioning:

Press push-button B. [The 3 chronograph hands will be reset to their zero positions].

17

ADJUSTING THE CHRONOGRAPH

HANDS TO ZERO POSITION

Minute counter Centre stop-sencond
%second counter

20

Example:

One or several chronograph hands are not in their correct zero positions and have to be adjusted [e.g. following a battery change].

Pull out the crown to position II (all 3 chronograph hands are in their correct or incorrect zero position).
Keep push Buttons A and B depressed simultaneously for at least 2 seconds [the centre stop-second rotates by 360^ corrective mode is activated].

图
Adjusting the centre stop second
Single step A 1 x short
Continuous A long
Adjusting the next hand B
Adjusting the %_10 second counter hand (position Bh)
Single step A 1 x short
Continuous A long
Adjusting the next hand B
Adjusting the minute counter
position 9h
Single step A 1 x short
Continuous A long

Returning the crown to position I Termination of the chronograph hands adjustment [can be carried out at any time].

21

SETTING THE TIME SETTING THE DATE [QUICK MODE]

*Pull out the crown to position II (the watch stops).
Turn the crown until you reach the correct time 8.45.
*Push the crown back into position I.

Please note:

In order to set the time to the exact. * second, must be pulled out when the second hand is in position e6D's [1]. Once the hour and minute hands have been set, must be pushed back into position 1 at the exact second.

Example after a change of month:

-Date on watch: 31
-Current date:1

Press the corrector C once to adjust the date 1 day forward.

Please note:

The date for the following day must be set during the date changing phase between 9:00 PM and 00:20 AM.

SETTING THE TIME,

DATE, DAY OF WEEK AND MONTH

Day of week

Example:

• On the watch: 10/MON/AN / 1:25 AM
  Current: 20/ THU/OCT/8:30PM

Pull out the crown to position II (the watch stops).
Turn crown until the current time is shown.
Push crown to position I [watch continues to run].

Please note:

To set your watch to the exact second * please refer to the chapter entitled «Setting the time»

Please observe the AM/PM clock rhythm

Corrector C

Day of week Month
Date

.

Press the corrector C to gradually advance the date hand.
Press the corrector D to gradually advance the day of week.
Press the corrector E to gradually advance the month.

MODE D'EMPLOI

m = 311

2501 Bienne Switzerland

a company of the Festina Group

www.candino.com