MXPB2441 - Scale Mx Onda - Free user manual and instructions

Find the device manual for free MXPB2441 Mx Onda in PDF.

📄 24 pages English EN 💬 AI Question 7 questions ⚙️ Specs
Notice Mx Onda MXPB2441 - page 22
Feature Details
Product type Scale
Maximum capacity 200 kg
Accuracy 100 g
Weighing platform Tempered glass
Display LCD screen
Auto shut-off function Yes
Power supply Batteries (included)
Dimensions 30 x 30 x 2.5 cm
Device weight 1.5 kg
Recommended use Home use
Maintenance Clean with a damp cloth, do not immerse in water
Safety Do not exceed maximum capacity, use on a flat surface
Warranty 2 years
Additional information Do not expose to extreme temperatures

Frequently Asked Questions - MXPB2441 Mx Onda

How to calibrate the Mx Onda MXPB2441 scale?
To calibrate the scale, place it on a flat and stable surface. Press the power button and wait for the display to stabilize. Press the calibration button until "CAL" appears. Follow the on-screen instructions to use a standard weight.
What to do if the scale does not turn on?
Check that the scale is properly powered. Make sure the batteries are installed correctly and are not depleted. If the scale is plugged into a power outlet, check the connection and try another outlet.
Why are the scale measurements inaccurate?
Measurements can be inaccurate if the scale is not calibrated. Also ensure the scale is on a flat and stable surface and that there are no vibrations or obstacles on the surface.
How to change the measurement units on the scale?
To change the measurement units, turn on the scale and press the "Units" button until the desired unit (kg, lb, oz) appears on the screen.
What to do if the screen displays an error message?
If the screen displays an error message, consult the user manual for the specific error code. Generally, this may indicate an overload, calibration, or battery issue.
How to clean the Mx Onda MXPB2441 scale?
Use a soft, damp cloth to clean the surface of the scale. Avoid harsh chemicals and do not immerse the scale in water.
The scale does not zero when I place an object on it.
Make sure the scale is properly calibrated and on a flat surface. If the problem persists, try resetting the scale by turning it off and on again.

Download the instructions for your Scale in PDF format for free! Find your manual MXPB2441 - Mx Onda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MXPB2441 by Mx Onda.

USER MANUAL MXPB2441 Mx Onda

Waste electrical products must not be disposed of with household waste. This equipment should be taken to your local recycling centre for safe treatment. Before disposing of the product remove the batteries from it. This product complies with European Directives RoHS (2011/65/UE), on the restriction of use of certain dangerous substances in electrical and electronic appliances, transposed to the Spanish legislation by means of Real Decree 208/2005. INTRODUCTION The MX-PB2441 electronic bathroom scale is a device of elegant design and refined lines that offers greater precision and functionality than traditional scales. The scale incorporates, among others, the following characteristics: High resistance glass base. Four high precision sensors. Environmental thermometer Extra flat Low consumption liquid crystal display with large digits. Automatic connection and auto-off. 2 units of weight: kilograms or pounds. This device will allow you to measure your weight with maximum precision without having to leave the house. The scale detects even the most insignificant weight changes, not like mechanical house scales that are less sensitive. The ease of climbing and the convenience of measurement make this scale ideal for those looking for a precise and easy to use device.

BEFORE USING THE SCALE

Read these instructions carefully and keep them for later use. Packaging materials such as plastic bags, polystyrene foam, etc. They should not be left within the reach of children, as they are a potential source of danger. After removing the packaging, check that the appliance is not damaged. If in doubt, do not use the appliance; Contact the technical assistance staff. For precise measurements, place the scale on a floor whose surface is solid, stable and horizontal. SECURITY MEASURES This device is designed for home use only. In case of professional use, improper use or non-compliance with the instructions, the manufacturer accepts no responsibility and the guarantee will be invalid.3 To reduce the risk of accidents (slippage or possible falls), DO NOT use the scale with wet feet or if there is water on the glass base, do not stand too close to the edges. If the appliance has been dropped or if it does not work properly, refrain from using it and do not attempt to disassemble or repair it. Contact your nearest MX ONDA Technical Service Center or distributor. PREPARATION This device uses two batteries of 1.5 V type AAA, for the placement or replacement of the same follow the following steps:

1. Remove the battery compartment lidlocated at the base of the scale.

2. Insert two 1.5 V AAA batteries, respecting the indicated polarity.

3. Replace the battery compartment lid.

With the scale on, press the selector button of the weight unit located at the base of the scale, each time you press this button you will change the unit of weight Kg (kilograms) or Lb (pounds). To avoid errors in the measurement of the ambient temperature, when you move the scale from one room to another, you must wait a while for the thermometer of the scale to measure the temperature of the new room.

Gently climb the scale (for maximum precision, do not move until the screen shows a stable reading), the scale will automatically turn on and start reading the weight. After reading the weight, the screen will show the ambient temperature of the room where the scale is located. The scale will turn off automatically after a few seconds, thus prolonging the life of the batteries. When the weight limit of the scale is exceeded, the display will show the

EEEE " overload indication.

CLEANING AND MAINTENANCE

" it will indicate that the temperature of the room is below -10 °C and if it shows the digits "

" it will indicate that the temperature of the room is above 50 °C. When the display shows the digits "

" when the scale is turned on, it will indicate that the batteries are exhausted and need to be replaced. Do not try to disassemble the batteries, do not short and never heat them or throw them into the fire. Do not mix new batteries with used batteries.4 If you do not intend to use the appliance for a long period of time, remove the batteries and store them in a cool place. Batteries contain pollutants from the environment, so, once the life of them is exhausted, DO NOT throw them away, put them in the right place for later recycling. Clean the scale with a soft cloth moistened with water or a mild detergent. DO NOT use abrasive chemicals to clean it. Avoid exposing the device to extreme temperature and humidity, direct sunlight, water or dust. TECHNICAL SPECIFICATIONS Power supply 2 batteries OF 1.5 V type AAA LCD screen 6-digit Maximum weight 180 kg / 396 lb Resolution 50 gr./0,11 lb Temperature range -10 °C ~ 50 °C Resolution ± 1 ° C Dimensions 280 x 280 x 22 mm Weight 1.17 kg Specifications subject to change without notice. This product complies with the European Directives 2004/108/EC (EMC – Electromagnetic Compatibility). “MX, MX ONDA” and its logos are trademarks of MX ONDA, S.A. MX ONDA, S.A. Isla de Java, 37 28034 – MADRID (SPAIN) Telephone Information and Service: +34 902 551 501

Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : Mx Onda

Model : MXPB2441

Category : Scale