Mx Onda MXPB2362 - Scale

MXPB2362 - Scale Mx Onda - Free user manual and instructions

Find the device manual for free MXPB2362 Mx Onda in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electronic Bathroom Scale
Brand Mx Onda
Model MXPB2362
Dimensions (L x W x H) 280 x 280 x 22 mm
Net Weight 1.17 kg
Power Supply 2 AAA 1.5 V batteries
Maximum Capacity 180 kg / 396 lb
Resolution 50 g / 0.11 lb
Display 6-digit LCD display, large digits
Measurement Units Kilograms (kg) or Pounds (lb)
Built-in Thermometer Yes, range -10°C to 50°C, accuracy ±1°C
Sensors 4 high-precision sensors
Platform Material High-strength glass
Automatic Functions Step-on activation, auto-off
Overload Indicator Displays "EEEE"
Low Battery Indicator Displays "L_0"
Cleaning Soft cloth moistened with water or mild detergent
Safety Do not use with wet feet or on slippery floor
Repair Refer to a qualified professional
Compliance RoHS, EMC (2004/108/EC), LVD (2006/95/EC)
Manufacturer MX ONDA, S.A., Cabanillas del Campo, Spain

Frequently Asked Questions - MXPB2362 Mx Onda

How to install batteries in the MXPB2362 scale?
Remove the battery compartment cover located under the scale. Insert two AAA 1.5 V batteries, respecting the indicated polarity. Replace the cover.
How to change the weight unit between kg and lb?
Once the scale is on, press the unit selection button located under the device. Each press toggles between kg (kilograms) and lb (pounds).
What does the display 'EEEE' mean on the scale?
The 'EEEE' indication means the maximum capacity of 180 kg has been exceeded. Step off immediately to avoid damaging the scale.
What does 'L_0' mean on the screen?
The 'L_0' display indicates the batteries are depleted. Replace both batteries with new ones, respecting polarity.
How to clean the glass scale?
Use a soft cloth slightly moistened with water or mild detergent. Never use abrasive or chemical products that could scratch or damage the surface.
Can I use the scale on a carpet or rug?
For accurate measurements, always place the scale on a hard, flat, and level surface (tile, wood). Soft surfaces distort the results.
What to do if the scale does not turn on?
Check that the batteries are correctly installed and not depleted. If the problem persists, contact MX ONDA technical support. Do not attempt to disassemble it.
Is the MXPB2362 scale accurate?
Yes, thanks to its 4 high-precision sensors, it detects weight variations of 50 g. Step on gently and remain still until the measurement stabilizes.
How to interpret the displayed temperature?
After weighing, the display shows the ambient temperature. If it is below -10°C, the display shows 'EL'; if above 50°C, it shows 'EH'. Wait for the scale to adapt to the new room.
What to do in case of malfunction or drop?
Stop using the scale and contact the MX ONDA technical service center or distributor. Do not attempt to repair it yourself, as this would void the warranty.

User questions about MXPB2362 Mx Onda

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Scale in PDF format for free! Find your manual MXPB2362 - Mx Onda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MXPB2362 by Mx Onda.

USER MANUAL MXPB2362 Mx Onda

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Mx Onda

Model : MXPB2362

Category : Scale