Bullet YWG403G - Wristwatch SWATCH - Free user manual and instructions

Product type	Watch
Brand	Swatch
Model	Bullet YWG403G
Case dimensions	Approximately 41 mm diameter, 10 mm thickness
Weight	Approximately 40 g
Power source	Battery SR621SW
Main functions	Analog display, time setting, day/date, touch alarm, Loomi lighting, game, rotating bezel for elapsed time
Water resistance	200 m (Scuba 200, not suitable for professional diving)
Strap material	Silicone (estimated)
Care	Rinse with fresh water after saltwater immersion
Safety	Do not use for professional diving
Repairability	Battery replaceable by a professional
Movement type	Quartz

Frequently Asked Questions - Bullet YWG403G SWATCH

How do I set the time on my Swatch Bullet YWG403G?

Pull the crown to position 2 (or position C depending on the model). Turn it gently to correct the minutes, quickly to correct the hours. Push the crown back in to finish.

How do I set the date and day?

Pull the crown to position B. Turn it counterclockwise to set the date, clockwise for the day. Push the crown back to position A.

How do I use the touch alarm?

Press the crown to switch ON/OFF mode. Pull the crown to position 1 to display the alarm. Turn it (slowly for minutes, quickly for hours) to set the time. Push the crown in to activate. To stop the alarm, press the glass.

How do I turn on the Loomi light?

Tap the watch glass lightly (Touch Loomi function). The light turns on.

How do I play with the Touch function?

Press the glass. The hands turn towards noon/midnight, then stop randomly to display a result. After a few seconds, they return to the time.

How do I use the bezel to measure elapsed time?

Turn the bezel to align the reference mark with the minute hand. Read the elapsed time on the bezel based on the hand's position.

What is the water resistance of the Swatch Bullet YWG403G?

It is water resistant to 200 meters (Scuba 200), but is not designed for professional diving. After saltwater immersion, rinse with fresh water.

How do I replace the battery?

Battery replacement must be done by a professional watchmaker to maintain water resistance. Use a SR621SW battery.

What to do if the hands do not display the time correctly?

Perform the initialization test: press the crown for 5 seconds. If the hands are not at noon/midnight, pull the crown to position 2 and adjust the hands (hour one way, minutes the other).

How do I use the alarm demonstration mode?

Press the crown for 2 seconds to start the demonstration. Press again to stop.

USER MANUAL Bullet YWG403G SWATCH

A: Normal position of the crown
C: Position for setting the time

To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

TOUCH/FUNSTANDARD

To set the time, pull the crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting has been completed, push the crown back.

DATE OR DAY SETTING

STANDARD

To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.

READJUSTMENT

TOUCH/FUN

TEST/OK

ADJUST HAND/+HOUR

ADJUST HAND/+MINUTES

GO

Push crown for 5 seconds. If both hands go to 12 o'clock, test is ok. Push crown again and hands go back to time.

If hands are not exactly at 12 o'clock, pull crown to position 2. Turn clockwise to readjust hour hand. Turn counter clockwise to readjust minute hand. Push crown back and hands turn back to show time.

LOOMI FUNCTION: DISPLAY

TOUCH LOOMI

TOUCH YOUR SWATCH

LOOMI ON

LOOMI

LIGHT FUNCTION

POP

POP-IN

POP-OUT

POP ON CLOTHES

Note: Wear your Swatch simply with its band or try „popping" it directly onto your clothes.

TOUCH ALARM

SHOW ALARM TIME

4 secs.

Touch your Swatch.

Hands move to show alarm time for approx. 4 seconds.

STOP ALARM

Touch your Swatch to stop alarm.

ALARMON/OFF

...CHANGE ON/OFF

SHOW LAST ALARM

...SET NEW ALARM

GO

Switch alarm on/off and set alarm time Press crown and hands go to actual mode on or off.

Press crown again to change mode.

Rull crown to position 1 and the hands go to the last alarm time.

To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours).

Then push crown back and hands turn back to time and alarm mode will be "on".

ALARM DEMO

Press crown for 2 seconds to start alarm demo.

To stop, press crown again.

IMPORTANT: When the hands do not show correctly ON-OFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock).

TOUCH GAME

Touch your Swatch.

Hands come together at 12 o'clock and start to rotate at least on full turn.

IMPORTANT: If hands are not exactly at 12 o'clock, they have to be readjusted.

4 secs.

Hands stop by accident and show the result of your game for some seconds... ...then, hands turn back to time.

SCUBA FUNCTION: ELAPSED TIME

Using the adjustment ring

For setting the start time and duration of an activity, line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustment ring.

WARNING NOTE

IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.

CAUTION: The Irony Scuba 2OO Chrono is not a professional diving watch.

ZEIT EINSTELLEN

EINSTELLLEN

BETRIEB

TIPPEN SIE AUF IHRE SWATCH

LOOMI GEHT AN

LOOMI

BELEUCHTUNG

POP

LOOMI-FUNCTIE: SCHERM

TOUCH LOOMI

RAAK JE SWATCH AAN

LOOMI ON

LOOMI

LICHT-FUNCTIE

POP

ERIN DRUKKEN

UITWIPPEN

AAN KLEDEDING BEVESTIGEN