Sir GB753 - Wristwatch SWATCH - Free user manual and instructions

Product type	Wristwatch
Brand	Swatch
Model	Sir GB753
Category	Multifunction analog watch
Movement	Quartz (battery)
Power supply	Battery (type unspecified, standard watch)
Main functions	Time, date, day, alarm, elapsed time (Scuba), Loomi light, Touch game
Time setting	Crown in position C (fully pulled out), turn in desired direction
Date and day setting	Crown in position B, turn counterclockwise for date, clockwise for day (standard)
Alarm setting	Crown in position 1, turn for hours/minutes; short press to activate/deactivate
Loomi function (light)	Tap gently on the glass to turn on
Scuba function (elapsed time)	Rotating bezel with marker; place the point facing the minute hand
Test and initialization	Press crown for 5 seconds to check noon/midnight
Water resistance	Scuba 200 Chrono: 200 meters (not professional)
Care and cleaning	Rinse with fresh water after immersion in salt water
Attachment	Strap included or direct attachment to clothing (Touch model)
Touch game	Press on the glass: the hands spin and stop randomly
Approximate weight	Approximately 80 g (estimate)
Case dimensions	Approximately 40 mm diameter (estimate)

Frequently Asked Questions - Sir GB753 SWATCH

How to set the time on the Swatch Sir GB753?

Pull the crown to position C (fully pulled out). Turn it in the desired direction: slowly for minutes, quickly for hours. Push the crown back to position A.

How to set the date and day?

Pull the crown to position B. Turn counterclockwise for the date, then clockwise for the day. Push the crown back to position A.

How to use the alarm function?

Press the crown to switch ON/OFF mode. Pull it to position 1, the hands indicate the last alarm. Turn the crown (slowly = minutes, quickly = hours) to set a new alarm. Push the crown back to activate the alarm.

How to turn on the Loomi light?

Tap lightly on the watch glass with your finger. The Loomi lights up to illuminate the dial.

How to use the Scuba function (elapsed time)?

Turn the rotating bezel to place the reference point (triangle) opposite the minute hand. The elapsed time is read on the bezel, indicated by the position of the minute hand.

How to perform the initialization test?

Press the crown for 5 seconds. If the hands indicate exactly noon/midnight, the test is successful. Otherwise, pull the crown to position 2 and adjust them: turn clockwise for the hour hand, counterclockwise for the minute hand.

How to play with the Touch function?

Press on the watch glass. The hands spin and stop randomly, displaying a result for a few seconds before returning to the time.

Is the watch water-resistant?

Yes, the Scuba 200 Chrono model is water-resistant to 200 meters. However, it is not a professional diving watch. After immersion in salt water, rinse it with fresh water.

How to replace the battery?

Battery replacement should be done by a watchmaker or an authorized Swatch service center. It is not recommended to open it yourself.

What to do if the hands do not align at noon/midnight during the test?

If after the 5-second test the hands are not exactly at noon/midnight, pull the crown to position 2. Turn it clockwise to adjust the hour hand, and counterclockwise for the minute hand. Push the crown back to return to the time.

USER MANUAL Sir GB753 SWATCH

A: Normal position of the crown
C: Position for setting the time

To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

To set the time, pull the crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting has been completed, push the crown back.

DATE OR DAY SETTING

STANDARD

To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.

READJUSTMENT

TOUCH/FUN

ADJUST HAND/+HOUR

ADJUST HAND/+MINUTES

Push crown for 5 seconds. If both hands go to 12 o'clock, test is ok. Push crown again and hands go back to time.

If hands are not exactly at 12 o'clock, pull crown to position 2. Turn clockwise to readjust hour hand. Turn counter clockwise to readjust minute hand. Push crown back and hands turn back to show time.

LOOMI FUNCTION: DISPLAY

TOUCH LOOMI

TOUCH YOUR SWATCH

LOOMI ON

LOOMI

LIGHT FUNCTION

POP

POP-IN

POP-OUT

POP ON CLOTHES

Note: Wear your Swatch simply with its band or try „popping" it directly onto your clothes.

TOUCH ALARM

SHOW ALARM TIME

4 secs.

Touch your Swatch.

Hands move to show alarm time for approx. 4 seconds.

STOP ALARM

Touch your Swatch to stop alarm.

ALARMON/OFF

...CHANGE ON/OFF

SHOW LAST ALARM

...SET NEW ALARM

GO

Switch alarm on/off and set alarm time Press crown and hands go to actual mode on or off.

Press crown again to change mode.

Rull crown to position 1 and the hands go to the last alarm time.

To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours).

Then push crown back and hands turn back to time and alarm mode will be "on".

ALARM DEMO

Press crown for 2 seconds to start alarm demo.

To stop, press crown again.

IMPORTANT: When the hands do not show correctly ON-OFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock).

TOUCH GAME

Touch your Swatch.

Hands come together at 12 o'clock and start to rotate at least on full turn.

IMPORTANT: If hands are not exactly at 12 o'clock, they have to be readjusted.

4 secs.

Hands stop by accident and show the result of your game for some seconds... ...then, hands turn back to time.

SCUBA FUNCTION: ELAPSED TIME

Using the adjustment ring

For setting the start time and duration of an activity, line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustment ring.

WARNING NOTE

IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.

CAUTION: The Irony Scuba 2OO Chrono is not a professional diving watch.

ZEIT EINSTELLEN

EINSTELLLEN

BETRIEB

TIPPEN SIE AUF IHRE SWATCH

LOOMI GEHT AN

LOOMI

BELEUCHTUNG

POP

LOOMI-FUNCTIE: SCHERM

TOUCH LOOMI

RAAK JE SWATCH AAN

LOOMI ON

LOOMI

LICHT-FUNCTIE

POP

ERIN DRUKKEN

UITWIPPEN

AAN KLEDEDING BEVESTIGEN