Windy Dune GE709 - Wristwatch SWATCH - Free user manual and instructions

Product type	Watch
Brand	Swatch
Model	Windy Dune GE709
Gender	Unisex
Movement	Quartz
Display	Analog (hands)
Main functions	Time, minutes, date, day, alarm, Loomi lighting, Touch function, game, Scuba timer
Time setting	Crown in position C (pulled out fully), turn to adjust
Day/date setting	Crown in position B, turn counterclockwise for date, clockwise for day
Alarm	Setting via crown, activation/deactivation by pressing
Lighting	Loomi: tap the watch lightly to turn on
Rotating bezel	Scuba to measure elapsed time
Water resistance	200 meters (Scuba 200 Chrono)
Case	Stainless steel (Irony)
Strap	Rubber
Crystal	Plexiglass (resistant plastic)
Power supply	Button cell battery (unspecified, standard)
Warranty	2 years
Maintenance	Rinse with fresh water after immersion in salt water
Case dimensions	Approximately 42 mm in diameter
Weight	Approximately 80 g

Frequently Asked Questions - Windy Dune GE709 SWATCH

How to set the time on my Swatch Windy Dune GE709?

Pull the crown to position C (pulled out fully). Turn it gently to adjust minutes, quickly for hours. Push the crown back to position A to complete.

How to set the date and day?

Pull the crown to position B (first click). Turn it counterclockwise for the date, and clockwise for the day. Push the crown back to position A.

How to use the alarm?

Press the crown to toggle between ON and OFF. To set the alarm time, pull the crown to position 1, turn it (slowly = minutes, quickly = hours). Push the crown to confirm and activate the alarm in ON mode.

How to activate the Loomi lighting?

Tap your Swatch lightly to activate the Loomi function. The watch illuminates automatically.

How to demonstrate the alarm?

Press the crown for 2 seconds to sound the alarm. Press again to stop it.

How to initialize the watch after a battery change?

Press the crown for 5 seconds. If the hands point to 12 o'clock/midnight, the test is successful. Otherwise, pull the crown to position 2, turn it clockwise for the hour hand, counterclockwise for the minute hand, then push back.

How to use the Scuba bezel to measure elapsed time?

Place the bezel's reference mark facing the minute hand. The elapsed time is read on the bezel at the position pointed by the minute hand.

Is the watch water-resistant and to what depth?

Yes, it is a Scuba 200 Chrono, water-resistant up to 200 meters. However, it is not a professional diving watch.

How to maintain the watch after contact with salt water?

Rinse it with fresh water after each immersion in salt water to prevent corrosion.

What to do if the hands are not aligned at 12 o'clock/midnight?

The hands need to be adjusted. Pull the crown to position 2, turn clockwise for the hour hand, counterclockwise for the minute hand, until 12 o'clock/midnight, then push back.

USER MANUAL Windy Dune GE709 SWATCH

A: Normal position of the crown
C: Position for setting the time

To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

TOUCH/FUNSTANDARD

To set the time, pull the crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting has been completed, push the crown back.

DATE OR DAY SETTING

STANDARD

To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.

READJUSTMENT

TOUCH/FUN

ADJUST HAND/+HOUR

ADJUST HAND/+MINUTES

Push crown for 5 seconds. If both hands go to 12 o'clock, test is ok. Push crown again and hands go back to time.

If hands are not exactly at 12 o'clock, pull crown to position 2. Turn clockwise to readjust hour hand. Turn counter clockwise to readjust minute hand. Push crown back and hands turn back to show time.

LOOMI FUNCTION: DISPLAY

TOUCH LOOMI

TOUCH YOUR SWATCH

LOOMI ON

LOOMI

LIGHT FUNCTION

POP

POP-IN

POP-OUT

POP ON CLOTHES

Note: Wear your Swatch simply with its band or try „popping" it directly onto your clothes.

TOUCH ALARM

SHOW ALARM TIME

4 secs.

Touch your Swatch.

Hands move to show alarm time for approx. 4 seconds.

STOP ALARM

Touch your Swatch to stop alarm.

ALARMON/OFF

...CHANGE ON/OFF

SHOW LAST ALARM

...SET NEW ALARM

GO

Switch alarm on/off and set alarm time Press crown and hands go to actual mode on or off.

Press crown again to change mode.

Pull crown to position 1 and the hands go to the last alarm time.

To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours).

Then push crown back and hands turn back to time and alarm mode will be "on".

ALARM DEMO

Press crown for 2 seconds to start alarm demo.

To stop, press crown again.

IMPORTANT: When the hands do not show correctly ON-OFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock).

TOUCH GAME

Touch your Swatch.

Hands come together at 12 o'clock and start to rotate at least on full turn.

IMPORTANT: If hands are not exactly at 12 o'clock, they have to be readjusted.

4 secs.

Hands stop by accident and show the result of your game for some seconds... ...then, hands turn back to time.

SCUBA FUNCTION: ELAPSED TIME

Using the adjustment ring

For setting the start time and duration of an activity, line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustment ring.

WARNING NOTE

IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.

CAUTION: The Irony Scuba 2OO Chrono is not a professional diving watch.

ZEIT EINSTELLEN

EINSTELLLEN

BETRIEB

TIPPEN SIE AUF IHRE SWATCH

LOOMI GEHT AN

LOOMI

BELEUCHTUNG

POP

LOOMI-FUNCTIE: SCHERM

TOUCH LOOMI

RAAK JE SWATCH AAN

LOOMI ON

LOOMI

LIGHT-FUNCTIE

POP

ERIN DRUKKEN

UITWIPPEN

AAN KLEDEDING BEVESTIGEN