Sixtease GW197 - Wristwatch SWATCH - Free user manual and instructions

Product type	Watch
Brand	Swatch
Model	Sixtease GW197
Movement	Quartz
Display	Analog with hands
Case diameter	Approximately 40 mm
Thickness	Approximately 10 mm
Weight	Approximately 50 g
Case material	Plastic (resin)
Strap	Silicone
Crystal	Mineral
Power source	Battery CR2016
Battery life	Approximately 2 to 3 years
Water resistance	200 meters (Scuba 200 Chrono)
Functions	Time, minutes, seconds, date, day, alarm, Loomi light, elapsed time chronograph, game
Time setting	Crown in position 2
Date setting	Crown in position B
Alarm	Activate by pressing the crown
Light	Loomi (tap on the watch)
Rotating bezel	Yes (used for elapsed time)
Maintenance	Rinse with fresh water after immersion in salt water
Repairability	Battery replacement by a watchmaker

Frequently Asked Questions - Sixtease GW197 SWATCH

How do I set the time on my Swatch Sixtease GW197?

Pull the crown to position 2. Turn it gently to adjust the minutes, quickly for the hours. Push the crown back to normal position.

How do I set the date and day?

Pull the crown to position B. Turn it counterclockwise to set the date, then clockwise for the day. Push the crown back to position A.

How do I use the alarm?

Press the crown to toggle ON/OFF. Pull to position 1 to set the alarm time (turn slowly for minutes, quickly for hours). Push the crown in to activate.

How does the Loomi light work?

Tap your Swatch lightly. The Loomi lights up automatically to illuminate the dial.

How do I use the chronograph function (elapsed time)?

Align the rotating bezel's reference mark exactly with the minute hand. The duration is read on the bezel relative to the minute hand.

How do I play with the button?

Press your Swatch. The hands spin to noon/midnight then stop randomly. The game result is displayed for a few seconds.

What to do if the hands are not at noon/midnight during the test?

Pull the crown to position 2. Turn it clockwise to adjust the hour hand, counterclockwise for the minute hand. Push the crown back in.

Is my watch water-resistant?

Yes, it is water-resistant up to 200 meters. However, it is not a professional diving watch.

How do I clean my watch after swimming in the sea?

Rinse it with fresh water to remove salt. Dry it with a soft cloth.

Which battery should I use?

Use a CR2016 battery. Have it replaced by a watchmaker.

USER MANUAL Sixtease GW197 SWATCH

A: Normal position of the crown
C: Position for setting the time

To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

TOUCH/FUNSTANDARD

To set the time, pull the crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting has been completed, push the crown back.

DATE OR DAY SETTING

STANDARD

To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.

READJUSTMENT

TOUCH/FUN

ADJUST HAND/+HOUR

ADJUST HAND/+MINUTES

Push crown for 5 seconds. If both hands go to 12 o'clock, test is ok. Push crown again and hands go back to time.

If hands are not exactly at 12 o'clock, pull crown to position 2. Turn clockwise to readjust hour hand. Turn counter clockwise to readjust minute hand. Push crown back and hands turn back to show time.

LOOMI FUNCTION: DISPLAY

TOUCH LOOMI

TOUCH YOUR SWATCH

LOOMI ON

LOOMI

LIGHT FUNCTION

POP

POP-IN

POP-OUT

POP ON CLOTHES

Note: Wear your Swatch simply with its band or try „popping" it directly onto your clothes.

TOUCH ALARM

SHOW ALARM TIME

4 secs.

Touch your Swatch.

Hands move to show alarm time for approx. 4 seconds.

STOP ALARM

Touch your Swatch to stop alarm.

ALARMON/OFF

...CHANGE ON/OFF

SHOW LAST ALARM

...SET NEW ALARM

GO

Switch alarm on/off and set alarm time Press crown and hands go to actual mode on or off.

Press crown again to change mode.

Pull crown to position 1 and the hands go to the last alarm time.

To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours).

Then push crown back and hands turn back to time and alarm mode will be "on".

ALARM DEMO

Press crown for 2 seconds to start alarm demo.

To stop, press crown again.

IMPORTANT: When the hands do not show correctly ON-OFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock).

TOUCH GAME

Touch your Swatch.

Hands come together at 12 o'clock and start to rotate at least on full turn.

IMPORTANT: If hands are not exactly at 12 o'clock, they have to be readjusted.

4 secs.

Hands stop by accident and show the result of your game for some seconds... ...then, hands turn back to time.

SCUBA FUNCTION: ELAPSED TIME

Using the adjustment ring

For setting the start time and duration of an activity, line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustment ring.

WARNING NOTE

IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.

CAUTION: The Irony Scuba 2OO Chrono is not a professional diving watch.

ZEIT EINSTELLEN

EINSTELLLEN

BETRIEB

TIPPEN SIE AUF IHRE SWATCH

LOOMI GEHT AN

LOOMI

BELEUCHTUNG

POP

LOOMI-FUNCTIE: SCHERM

TOUCH LOOMI

RAAK JE SWATCH AAN

LOOMI ON

LOOMI

LICHT-FUNCTIE

POP

ERIN DRUKKEN

UITWIPPEN

AAN KLEDING BEVESTIGEN