Climber SFK300G - Wristwatch SWATCH - Free user manual and instructions

Product Type	Analog wristwatch with touch functions
Brand	Swatch
Model	Climber SFK300G
Category	Watch
Movement	Quartz analog (two hands)
Display	Hands for hours, minutes, date, and day
Main Functions	Time, date, day, alarm, Loomi (lighting), Touch game, Scuba countdown
Alarm	Touch Alarm: on/off setting, demonstration, alarm time display
Lighting	Loomi: activation by tapping
Countdown	Unidirectional rotating bezel for elapsed time measurement (Scuba type)
Battery Type	Button cell (Renata 371 or equivalent)
Battery Life	Approximately 2 to 3 years (standard estimate)
Case Dimensions	Approximately 34 mm diameter (standard Swatch estimate)
Case Thickness	Approximately 8 mm (standard estimate)
Weight	Approximately 20 g (estimate with plastic strap)
Case Material	Plastic (Swatch resin)
Strap Material	Silicone or plastic (depending on version)
Crown	Multifunction pusher/crown (positions A, B, C)
Care and Cleaning	Clean with a soft, dry cloth. Avoid salt water. Rinse with fresh water after possible immersion.
Safety	Do not expose to violent shocks, avoid extreme temperatures. Keep out of reach of children (battery present).
Spare Parts and Repairability	Battery and strap available. Battery change by watchmaker. Repair at an authorized Swatch service center.

Frequently Asked Questions - Climber SFK300G SWATCH

How to set the time on the Swatch Climber SFK300G?

Pull the crown to position C (position 2). Turn slowly for minutes, quickly for hours. Push the crown back to position A (normal position) to finish.

How to set the date and day?

Pull the crown to position B. Turn counterclockwise to set the date, then clockwise for the day. Push the crown back to position A.

How to activate and set the alarm?

Press the crown to switch to ON/OFF mode. Pull the crown to position 1, the hands display the last alarm. Turn the crown (slowly = minutes, quickly = hours) to set the time. Push the crown back to confirm and activate the alarm.

How to stop the alarm?

Briefly press your Swatch (touch dial) to stop the alarm.

How to use the Loomi (lighting) function?

Tap gently on your Swatch to turn on the Loomi. The light turns off automatically after a few seconds.

How to play with the Touch function?

Press your Swatch. The hands rotate until 12:00/midnight, then stop randomly to display a result. Press again to return to the time.

How to use the diving bezel (Scuba)?

Turn the bezel to place the reference mark in front of the minute hand. The hand then indicates the elapsed time on the bezel.

How to test and initialize the watch?

Press for 5 seconds on the crown. If the hands point exactly to 12:00/midnight, the test is good. Otherwise, pull the crown to position 2 and adjust the hands (clockwise for hours, counterclockwise for minutes). Push the crown back.

What to do if the hands do not move or the display is incorrect?

Perform a reset by holding the crown pressed for 5 seconds. If the problem persists, check the battery. For alarms, repeat the Touch Alarm setting.

How to change the watch battery?

Entrust the battery change to a watchmaker or an authorized Swatch service center. Opening the case yourself may damage the water resistance.

USER MANUAL Climber SFK300G SWATCH

A: Normal position of the crown
C: Position for setting the time

To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

To set the time, pull the crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting has been completed, push the crown back.

DATE OR DAY SETTING

STANDARD

To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.

READJUSTMENT

TOUCH/FUN

ADJUST HAND/+HOUR

ADJUST HAND/+MINUTES

Push crown for 5 seconds. If both hands go to 12 o'clock, test is ok. Push crown again and hands go back to time.

If hands are not exactly at 12 o'clock, pull crown to position 2. Turn clockwise to readjust hour hand. Turn counter clockwise to readjust minute hand. Push crown back and hands turn back to show time.

LOOMI FUNCTION: DISPLAY

TOUCH LOOMI

TOUCH YOUR SWATCH

LOOMI ON

LOOMI

LIGHT FUNCTION

POP

POP-IN

POP-OUT

POP ON CLOTHES

Note: Wear your Swatch simply with its band or try „popping" it directly onto your clothes.

TOUCH ALARM

SHOW ALARM TIME

4 secs.

Touch your Swatch.

Hands move to show alarm time for approx. 4 seconds.

STOP ALARM

Touch your Swatch to stop alarm.

ALARMON/OFF

...CHANGE ON/OFF

SHOW LAST ALARM

...SET NEW ALARM

GO

Switch alarm on/off and set alarm time Press crown and hands go to actual mode on or off.

Press crown again to change mode.

Rull crown to position 1 and the hands go to the last alarm time.

To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours).

Then push crown back and hands turn back to time and alarm mode will be "on".

ALARM DEMO

Press crown for 2 seconds to start alarm demo.

To stop, press crown again.

IMPORTANT: When the hands do not show correctly ON-OFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock).

TOUCH GAME

Touch your Swatch.

Hands come together at 12 o'clock and start to rotate at least on full turn.

IMPORTANT: If hands are not exactly at 12 o'clock, they have to be readjusted.

4 secs.

Hands stop by accident and show the result of your game for some seconds... ...then, hands turn back to time.

SCUBA FUNCTION: ELAPSED TIME

Using the adjustment ring

For setting the start time and duration of an activity, line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustment ring.

WARNING NOTE

IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.

CAUTION: The Irony Scuba 2OO Chrono is not a professional diving watch.

ZEIT EINSTELLEN

TIPPEN SIE AUF IHRE SWATCH

LOOMI GEHT AN

LOOMI

BELEUCHTUNG

POP

LOOMI-FUNCTIE: SCHERM

TOUCH LOOMI

RAAK JE SWATCH AAN

LOOMI ON

LOOMI

LICHT-FUNCTIE

POP

ERIN DRUKKEN

UITWIPPEN

AAN KLEDEDING BEVESTIGEN