LTL 20 A2 - Lamp Livarno Lux - Free user manual and instructions

USER MANUAL LTL 20 A2 Livarno Lux

Introduction Thank you for choosing a LIVARNO LUX product. The Daylight Lamp LTL 20 A2 can be used as a desk lamp with a natural light spectrum. The flexible gooseneck allows you to adjust the light to suit your needs. Intended Use This lamp is not destined for commercial use. Install this lamp only in enclosed rooms. Always make sure the lamp is always on a stable surface. The device fulfils all that relates to CE Conformity, relevant norms and standards. Any modifications to the device other than recommended changes by the manufacturer may result in these directives no longer being met. Package Contents Energy-Saving Daylight with Bulb

This User manual has a fold-out cover. On the inside of the cover the light is shown with figures indicated. The figures have the following meanings: 1 On/Off button 2 Lampshade 3 Flexible gooseneck 4 Lamp standDaylight Lamp LTL 20 A2 English - 37 Technical Specifications Manufacturer: LIVARNO LUX Model name: LTL 20 A2 Operating voltage: 230 V

Important Safety Notice Before you use this device for the first time, please read the following notes in this manual and heed all warnings, even if you are familiar with handling electronic devices. Keep this manual safe for future reference. If you sell the device or pass it on, it is essential you hand over this manual also. WARNING! This icon denotes important information for the safe operation of the product and for the user’s safety.

This symbol denotes further information on the topic.

Electrical devices do not belong in the hands of children. Do not allow children to use electrical devices when not under supervision. Children may not comprehend the presence of potential risks. Keep the packaging away from children too as there is danger of suffocation. If you notice any smoke, unusual noises or strange smells, switch off the device immediately and remove the plug from the wall socket. If this occurs the device should no longer be used and should be inspected by authorisedDaylight Lamp LTL 20 A2 English - 39 service personnel. Do not inhale any smoke which could have originated from a fire in the device. However, if you do inhale smoke, please consult a doctor. Smoke inhalation can be harmful. The lamp housing and the power cable must not be damaged in any way. Stop using the lamp immediately if you find any cables damaged. If the housing or cable is damaged, you could potentially get an electric shock. Do not open the housing of the lamp - it contains no serviceable parts. If the housing is opened, you run the risk of an electric shock. Therefore, make sure that the lamp is not subject to excessive vibration, as this can cause the light bulb to break. There is a risk of injury if the bulb is broken! Do not hang anything from the lamp. The plastic body is not designed to carry weight. In particular, do not place flammable materials on or behind the lamp. This can damage the lamp and could cause a fire. Never use any optical devices such as a magnifying glass to look directly into the light beam - this could damage your eyes! If you suspect any eye damage, consult a doctor.Daylight Lamp LTL 20 A2

Cables Unplug the cable by holding the plug and never pull on the cable itself. Never place the device, pieces of furniture or other heavy objects on the cable and take care that this does not become trapped. Never make knots in the cable and do not tie it together with other cables. All cables should be positioned so that nobody can trip over them or be obstructed by them. Never use adapter plugs or extension cables that do not comply with the current safety regulations in your country, and do not modify any of the cables yourself. A damaged cable should only be replaced by the manufacturer or authorized service center. Before Getting Started Unpack the lamp. For additional transport protection, the energy-saving luminaire is packed in an extra packaging. Open the packaging, remove the luminaire and insert it by rotating clockwise into the holder. Hold the luminaire always on the socket and never on the glass body. The luminaire should always be touched using a cloth.Daylight Lamp LTL 20 A2 English - 41 Getting Started Powering the Device On/Off Plug the power plug into a suitable power socket. No extension cables or multiple outlet strips should be used that do not meet safety requirements. Press the On/Off switch (1) to position "I" to power the light on. Press the On/Off switch to position "0" to power the light off. Notice on Mains Separation. The device is only fully separated from the mains when the mains plug is pulled out of the wall outlet. Switching off the device with the incorporated switch does not disconnect the appliance from the mains. Flexible Gooseneck The flexible gooseneck (3)allows you to easily adjust the direction of the lamp to suit your needs. When doing this always make sure the lamp is on a stable surface. Do not turn the gooseneck more than 45º to the left or right. Do not bend the gooseneck towards the back, but instead turn the whole light housing round if you want the light to shine backwards.Daylight Lamp LTL 20 A2

Maintenance / Cleaning Replacing the Bulb Allow the lamp to cool completely before replacing the bulb. Unplug the mains plug from the wall socket. Unscrew the defective luminaire from the holder by turning it counter clockwise. Insert a new luminaire of the same type (see chapter "Technical specifications") into the holder and turn it clockwise. Hold the luminaire always on the socket and never on the glass body. The luminaire should always be touched using a cloth. Plug the power plug back into the power socket. Cleaning Allow the lamp to cool completely before replacing the bulb. To clean the light use a dry cloth. Never use any solvents or cleaners that may damage the plastic housing. Make sure that no liquid gets into the housing. When very dirty, use a slightly dampened cloth.Daylight Lamp LTL 20 A2 English - 43 Environmental Considerations and Recycling If the product is labelled with a struck-out waste bin, it is subject to the European Guideline 2012/19/EU. All electric and electronic devices must be disposed of separately from household waste at established bodies. For environmental protection reasons, bulbs must be properly disposed of. Do not dispose of this device in with domestic trash. You can find out more information on collection points or collection dates from your municipal administration or local waste disposal company. Recycle the packaging material properly also. Cardboard packaging can be taken to paper recycling containers or public collection points for recycling. Any films or plastic contained in the packaging should be taken to your public collection points. Conformity This device complies with the basic and other relevant requirements of the EMC Directive 2004/108/EC, the Low-voltage Directive 2006/95/EC, the ErP Directive 2009/125/EC and the RoHS Directive 2011/65/EU. The corresponding Declaration of Conformity can be found at the end of this User Manual.Daylight Lamp LTL 20 A2

Details of Guarantee Warranty of TARGA GmbH Dear Customer, This device is sold with three years warranty from the date of purchase. In the event of product defects, you have legal rights towards the seller. These statutory rights are not restricted by our warranty as described below. Warranty conditions The warranty period commences upon the date of purchase. Please keep the original receipt in a safe place as it is required as proof of purchase. If any material or manufacturing faults occur within three years of purchase of this product, we will repair or replace the product free of charge as we deem appropriate. Warranty period and legal warranty rights The warranty period is not extended in the event of a warranty claim. This also applies to replaced and repaired parts. Any damage or defects discovered upon purchase must be reported immediately when the product has been unpacked. Any repairs required after the warranty period will be subject to charge. Scope of warranty The device was carefully manufactured in compliance with stringent quality guidelines and subjected to thorough testing before it left the works. The warranty applies to material and manufacturing faults. This warranty does not cover product components which are subject to normal wear and which can therefore be regarded as wearing parts, or damage to fragile components such as switches, rechargeable batteries or components made of glass. This warranty is void if the product is damaged, incorrectly used or serviced. To ensure correct use of the product, always comply fully with all instructions contained in the user manual. The warnings and recommendations in the user manual regarding correct and incorrect use and handling of the product must always be observed and complied with. The product is solely designed for private use and is not suitable for commercial applications. The warranty is rendered void in the event of incorrect handling and misuse, if it is subjected to force, and also if any person other than our authorised service technicians interfere with the device. No new warranty period commences if the product is repaired or replaced. Submitting warranty claims To ensure speedy handling of your complaint, please note the following: - Before using your product for the first time, please read the enclosed documentation carefully. Should any problems arise which cannot be solved in this way, please call our hotline. - Always have your receipt, the product article number as well as the serial number (if available) to hand as proof of purchase.Daylight Lamp LTL 20 A2 English - 45 - If it is not possible to solve the problem on the phone, our hotline support staff will initiate further servicing procedures depending on the fault.

Manufacturer Please note that the following address is not a service address. First contact the service point stated above. TARGA GmbH Coesterweg 45 59494 SOEST GERMANY