MR010 - Freezer DOMO - Free user manual and instructions

★ ★ ★ ★ ★ 5.5/10 📄 84 pages PDF ⬇️ EN 💬 AI Question 🖨️ Print

USER MANUAL MR010 DOMO

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Til de deur op en plaats deze op een zacht oppervlak om krassen te vermijden. Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

HET APPARAAT VERPLAATSEN

• Gebruik binnen de minimale houdbaarheidsdatum. Daily Use Temperature Setting Plug on your appliance. The internal temperature is controlled by a thermostat. There are 3 settings MIN, NORMAL and MAX. MIN is warmest setting and MAX is coldest setting. The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often. First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish. Daily use Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Place the fresh food to be frozen in the bottom compartment. The maximum amount of food that can be frozen in 24 hours is specified on the rating plate. The freezing process lasts 24 hours: during this period do not add other food to be frozen. Storing frozen food When first starting-up or after a period out of use, before putting the product in the compartment let the appliance run at least 2 hours on the higher settings. Important! In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked). Thawing Deep-frozen or frozen food, prior to be used, can be thawed in the fridge compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer. Ice-cube This appliance may be equipped with one or more trays for the production of ice-cubes. Helpful hints and tips Hints for freezing To help you make the most of the freezing pro-cess, here are some important hints: the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; the freezing process takes 24 hours. No further food to be frozen should be added during this period; only freeze top quality, fresh and thoroughly cleaned, foodstuffs; prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required; wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; Daily Use

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

2. Retirez le couvercle supérieur et le sélecteur de température du congélateur.

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

porte et placez-la sur une surface rembourrée pour éviter qu’elle ne se raye. Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

• La durée de fonctionnement et la température sont aectées Daily Use Temperature Setting Plug on your appliance. The internal temperature is controlled by a thermostat. There are 3 settings MIN, NORMAL and MAX. MIN is warmest setting and MAX is coldest setting. The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often. First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish. Daily use Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Place the fresh food to be frozen in the bottom compartment. The maximum amount of food that can be frozen in 24 hours is specified on the rating plate. The freezing process lasts 24 hours: during this period do not add other food to be frozen. Storing frozen food When first starting-up or after a period out of use, before putting the product in the compartment let the appliance run at least 2 hours on the higher settings. Important! In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked). Thawing Deep-frozen or frozen food, prior to be used, can be thawed in the fridge compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer. Ice-cube This appliance may be equipped with one or more trays for the production of ice-cubes. Helpful hints and tips Hints for freezing To help you make the most of the freezing pro-cess, here are some important hints: the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; the freezing process takes 24 hours. No further food to be frozen should be added during this period; only freeze top quality, fresh and thoroughly cleaned, foodstuffs; prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required; wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; Daily Use

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Position hält. Heben Sie die Tür hoch und legen Sie diese zur Vermeidung von Kratzern auf inen weichen Untergrund. Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Gerät. Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

• Zum Einfrieren von Lebensmitteln. Hinweis: Achten Sie darauf, dass die Tür des Gefrierschranks immer ordnungsgemäß geschlossen ist. Önen Sie die Türen des Gefrierschranks nur wenn nötig. Daily Use Temperature Setting Plug on your appliance. The internal temperature is controlled by a thermostat. There are 3 settings MIN, NORMAL and MAX. MIN is warmest setting and MAX is coldest setting. The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often. First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish. Daily use Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Place the fresh food to be frozen in the bottom compartment. The maximum amount of food that can be frozen in 24 hours is specified on the rating plate. The freezing process lasts 24 hours: during this period do not add other food to be frozen. Storing frozen food When first starting-up or after a period out of use, before putting the product in the compartment let the appliance run at least 2 hours on the higher settings. Important! In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked). Thawing Deep-frozen or frozen food, prior to be used, can be thawed in the fridge compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer. Ice-cube This appliance may be equipped with one or more trays for the production of ice-cubes. Helpful hints and tips Hints for freezing To help you make the most of the freezing pro-cess, here are some important hints: the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; the freezing process takes 24 hours. No further food to be frozen should be added during this period; only freeze top quality, fresh and thoroughly cleaned, foodstuffs; prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required; wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; Daily Use

WARRANTY Dear client , All of our products are always submitted to a strict quality control before they are sold to you. Should you nevertheless experience problems with your device, we sincerely regret this. In that case, we kindly request you to contact our customer service. Our sta will gladly assist you. +32 14 21 71 91 info@linea2000.be Monday – Thursday: 8.30 – 12.00 and 13.00 – 17.00 Friday: 8.30 – 12.00 and 13.00 – 16.30 This appliance has a two year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty. If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it. The guarantee on accessories and components that are liable to wear-and-tear is only 6 months. The guarantee and responsibility of the supplier and manufacturer lapse automatically in the following cases:

• If the instructions in this manual have not been followed.

• In case of incorrect connection, e.g., electrical voltage that is too high.

• In case of incorrect, rough or abnormal use.

• In case of insucient or incorrect maintenance.

• In case of repairs or alterations to the device by the consumer or non-authorised third parties.

• If the customer used parts or accessories that are not recommended or provided by the supplier / manufacturer.40 DO924DV

• Read all instructions before use.

• This appliance may be used by children from the age of 16 and up, and also by persons with a physical or sensorly limitation, as well as mentally limited persons or persons with a lack of experience and knowledge. But only on the condition that these persons have received the necessary instructions on how to use this appliance in a safe way and know the dangers that can occur by using this appliance.

• Children cannot be allowed to play with the appliance.

• Maintenance and cleaning of the appliance may not be done by children, unless they are older than 16 years old and are under supervision. Keep the appliance out of reach of children younger than 16 years old.

• This appliance is suitable to be used in a household environment and in similar surroundings such as:

• Kitchen for personnel of shops, oces or other similar professional surroundings

• Hotel or motel rooms and other surroundings with a residential character

• Guest rooms or similar

• Attention: This appliance cannot be used with an external timer or a separate remote control.

• Before use, check if the voltage stated on the appliance corresponds with the voltage of the power net at your home.

• Do not let the cord hang on a hot surface or on the edge of a table or counter top.

• Never use the appliance when the cord or plug is damaged, after malfunction or when the appliance itself is damaged. In that case, take the appliance to the nearest qualied service center for check-up and repair.

• Close supervision is necessary when the appliance is used near or by children.

• The use of accessories that are not recommended or sold by the manufacturer can cause re, electrical shock or injuries.

• Unplug the appliance when it is not in use, before assembling or disassembling any parts and before cleaning the appliance. Unplug the appliance by grasping the plug. Never unplug by pulling the cord.

• Never place this appliance near a gas stove or electrical stove or in a place where it may come into contact with a warm appliance.

• Do not use the appliance outdoors.

• Only use the appliance for its intended use.

• Always use the appliance on a steady, dry and level surface.

• The manufacturer can not be held responsible for accidents that result from improper use of the appliance or not following the instructions described in this manual.

• All repairs should be carried out by the manufacturer or its aftersales service.41 DO924DV www.domo-elektro.be

• Never immerse the appliance, the cord or the plug in water or any other liquid.

• Make sure that children do not touch the cord or appliance.

• Keep the cord away from sharp edges and hot parts or other heat sources.

• Before use, remove all packaging materials and any promotional stickers.

• Keep the ventilation openings free of obstructions.

• Do not use any other electrical appliance inside the fridge, unless they are approved for this purpose by the manufacturer.

• Do not keep any explosive substances inside the appliance, like for instance aerosol cans with a ammable propellant.

• Make sure that the refrigerant circuit does not get damaged, for instance during transportation or installation.

• Make sure that the plug does not get squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause re.

• Make sure that you have access to the plug of the appliance.

• Do not pull the cord.

• If the socket is loose, do not plug in the appliance. (risk of electric shock or re)

• This is a heavy appliance. Be careful when moving it. PARTS

• Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the inside with a wet, lukewarm cloth.

• Avoid direct sunlight and heat. Direct sunlight may aect the acrylic coating. Heat sources nearby will cause higher electricity consumption.

• Avoid very moist places.

• Before connecting your refrigerator to the power supply, check that the voltage stated on the rating label of your appliance corresponds to the voltage in your home. A dierent voltage could damage the appliance.

• Make sure that the air can circulate around the refrigerator. Spacers have been provided with the refrigerator to ensure that it cannot be pushed right up against the wall. Fasten these to the back of the refrigerator.

• For uneven surfaces, front feet can be aligned.

• Allow the appliance to stand for 2 hours before turning it on. This allows the cooling agent to settle.

• After installation, leave the freezer for 12 hours before turning it on. This way the refrigerant can settle. DOOR CONVERSION The freezer has a reversible door. If you need to hinge your door on the opposite side it is recommended that you call your local authorised service agent to make this conversion or ask43 DO924DV www.domo-elektro.be

a technician. Before you reverse the door, you should ensure the appliance is unplugged and empty.

1. Remove the screws on the back of the top cover.

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

2. Remove the top cover and temperature control from the freezer.

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

3. Remove the three screws and then remove the top hinge that holds the door in place. Lift

the door and place it on a padded surface to prevent it from being scratched. Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

4. Remove the bottom screw, hinge bracket and adjustable foot from the bottom of the

appliance. Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

5. Take the hinge pin out of the hinge bracket. Turn the bracket around and tighten the pin

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

6. Attach the screws, hinge bracket and adjustable foot to the opposite side of the bottom.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

7. Carefully set the door back into place. Ensure the door is aligned horizontally and

vertically so that the seals are closed on all sides before nally tightening the top hinge. Insert the hinge back and screw it to the top of the appliance.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

8. Put the top cover back and x it in place with the screws.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

MOVING YOUR APPLIANCE

• If the appliance is turned o for any reason, wait for 10 minutes before turning it back on. This will allow the refrigeration system pressures to equalise before restarting.

• Turn o the appliance and unplug it from the mains socket. Remove all food. Also remove all mobile parts (shelves, accessories, etc.) or x them into the freezer to avoid any shock.

• Relocate and install. If the appliance has been left on its side for any length of time, leave it standing upright for at least 10 minutes.

• Your appliance uses isobutane (R600a) as a refrigerant. Although R600a is an environmentally friendly and natural gas, it is explosive. Therefore you should be careful during shipment and installation to prevent your appliance’s cooler elements from being damaged. In the event of a leak caused by damage to the cooler elements, move your fridge from open ame or heat sources and ventilate the room where the appliance is located for a few minutes. USE TEMPERATURE CONTROL The freezer is controlled with a temperature control knob located inside the appliance. Adjust the control knob as desired to suit your individual preference. There are three dierent setting, with MIN being the warmest and MAX the coldest.

• The running time and temperature are aected by where the freezer is located, how often the door is opened and the temperature of the room the freezer is located in.

• When you use the appliance for the rst time or after defrosting, adjust the control knob to the coldest setting for at least 2 hours before introducing food to be stored, and then readjust to the middle setting. FREEZING AND STORING FOOD IN THE FREEZER Use the freezer

• To store deep-frozen food. Daily Use Temperature Setting Plug on your appliance. The internal temperature is controlled by a thermostat. There are 3 settings MIN, NORMAL and MAX. MIN is warmest setting and MAX is coldest setting. The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often. First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish. Daily use Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Place the fresh food to be frozen in the bottom compartment. The maximum amount of food that can be frozen in 24 hours is specified on the rating plate. The freezing process lasts 24 hours: during this period do not add other food to be frozen. Storing frozen food When first starting-up or after a period out of use, before putting the product in the compartment let the appliance run at least 2 hours on the higher settings. Important! In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked). Thawing Deep-frozen or frozen food, prior to be used, can be thawed in the fridge compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer. Ice-cube This appliance may be equipped with one or more trays for the production of ice-cubes. Helpful hints and tips Hints for freezing To help you make the most of the freezing pro-cess, here are some important hints: the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; the freezing process takes 24 hours. No further food to be frozen should be added during this period; only freeze top quality, fresh and thoroughly cleaned, foodstuffs; prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required; wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; Daily Use

• To freeze food. Note: Ensure that the freezer door has been closed properly. Avoid opening the freezer drawers unnecessarily. Purchasing frozen food

• Packaging must not be damaged.

• Use by the ‘use by /best before/best by/’ date.

• If possible, transport deep-frozen food in an insulated bag and place quickly in the freezer. Freezing fresh food Freeze fresh and undamaged food only. To retain the best possible nutritional value, avour and colour, vegetables should be blanched before freezing. Aubergines, peppers, zucchini and asparagus do not require blanching. Note: Keep food to be frozen away from food which is already frozen.

• The following foods are suitable for freezing: Cakes and pastries, sh and seafood, meat, game, poultry, vegetables, fruit, herbs, eggs without shells, dairy products such as cheese and butter, ready meals and leftovers such as soups, stews, cooked meat and sh, potato dishes, soués and desserts.

• The following foods are not suitable for freezing:Types of vegetables, which are usually consumed raw, such as lettuce or radishes, eggs in shells, grapes, whole apples, pears and peaches, hard-boiled eggs, yoghurt, soured milk, sour cream, and mayonnaise. Packing frozen food To prevent food from losing its avour or drying out, place food in airtight packaging.

1. Place food in packaging.

4. Label packaging with contents and dates of freezing.

Suitable packaging: Plastic lm, tubular lm made of polyethylene, aluminium foil, freezer containers. Recommended storage times of frozen food in the freezer These times vary depending on the type of food. The food that you freeze can be preserved from 1 to 12 months (minimum at -18°C). Food Storage time Bacon, casseroles, milk 1 month Bread, ice cream, sausages, pies, prepared shellsh, oily sh 2 months Non-oily sh, shellsh, pizza, scones and muns 3 months47 DO924DV www.domo-elektro.be

Ham, cakes, biscuits, beef and lamb chops, poultry pieces 4 months Butter, vegetables (blanched), eggs whole and yolks, cooked craysh, minced meat (raw), pork (raw) 6 months Fruit (dry or in syrup), egg whites, beef (raw), whole chicken, lamb (raw), fruit cakes 12 months Never forget:

• When you freeze fresh foods whit a ‘use by /best before/best by/’ date, you must freeze them before the expiry of this date.

• Check that the food was not already frozen. Indeed, frozen food that has thawed completely must not be refrozen.

• Once defrosted, food should be consumed quickly.

CLEANING AND MAINTENANCE

CLEANING Do not use abrasive cleaning agents or solvents.

1. Turn the appliance o. Disconnect the mains plug from the mains socket.

2. Take out the food and store in a cool location.

3. Clean the appliance with a soft cloth, warm water and detergent.

4. Wipe the door seal with clear water only and then wipe dry thoroughly.

5. After cleaning reconnect and adjust the temperature control knob as desired.

6. Put the food back into the appliance.

DEFROSTING A layer of frost in the freezer will impair refrigeration of the frozen food and increases power consumption. Remove the layer of frost regularly. Do not scrape o frost or ice with a knife or pointed object. Doing this may damage the refrigerant tubes.

1. Remove the frozen food and place temporarily in a cool location.

2. Disconnect the appliance from the mains socket.

3. To accelerate the defrosting process, place a pan of hot water on a stand in the freezer.

4. Wipe up condensation with a cloth or sponge.

5. Wipe dry the freezer compartment.

6. Plug in the appliance and adjust the temperature control knob as desired.

7. Put the frozen food back in the freezer.

VACATION TIME For short vacation periods, leave the control knobs at their usual settings. During longer absences;48 DO924DV

• Disconnect from electrical outlet.

• Clean the refrigerator thoroughly, including defrost pan.

• Leave door open to avoid possible formations of condensate, mold or odors. POWER FAILURE

• Most power failures are corrected within an hour or two and will not aect your refrigerator temperatures. However, you should minimize the number of door openings while the power is o. During power failures of longer duration, take steps to protect your food by blacking dry ice on top of packages.

• Frozen food should not be aected if the power failure lasts for less than 15 hours.

• Do not refreeze frozen foods that have thawed completely. The food may be dangerous to eat. TROUBLE SHOOTING Frequently, a problem is minor and a service call may not be necessary, use this trouble shooting guide for a possible solution. Does not work.

• Check connection of power cord to power source.

• Use proper voltage. The appliance is too cold.

• The temperature has been set too cold. Raise the temperature slightly. The food is not frozen.

• The temperature has not been set correctly. Reset the temperature.

• The door has been left open too long. Only open the door when it is necessary.

• The appliance is positioned too close to a source of heat. Formation of ice on the seal of the door.

• The seal of the door does not seal properly. Thaw the ice on the seal and reshape the rubber with your hand so that the door closes properly. Unusual noise. The appliance is touching the wall or another object. Gently move the appliance.49 DO924DV www.domo-elektro.be

ENVIRONMENTAL GUIDELINES This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city oce, your household waste disposal service or the shop where you purchased the product. The packaging is recyclable. Please treat the packaging ecologically.50 DO924DV

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

2. Retire la tapa superior y el regulador de temperatura del congelador.

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

su lugar. Levante la puerta y colóquela sobre una supercie suave para evitar arañazos. Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

El congelador se regula por medio de un control de temperatura que se encuentra en el interior del aparato. Sitúe el control en la posición deseada. Hay tres posiciones diferentes, siendo MIN el ajuste con la temperatura más alta y MAX el ajuste con la temperatura más fría. Daily Use Temperature Setting Plug on your appliance. The internal temperature is controlled by a thermostat. There are 3 settings MIN, NORMAL and MAX. MIN is warmest setting and MAX is coldest setting. The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often. First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish. Daily use Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Place the fresh food to be frozen in the bottom compartment. The maximum amount of food that can be frozen in 24 hours is specified on the rating plate. The freezing process lasts 24 hours: during this period do not add other food to be frozen. Storing frozen food When first starting-up or after a period out of use, before putting the product in the compartment let the appliance run at least 2 hours on the higher settings. Important! In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked). Thawing Deep-frozen or frozen food, prior to be used, can be thawed in the fridge compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer. Ice-cube This appliance may be equipped with one or more trays for the production of ice-cubes. Helpful hints and tips Hints for freezing To help you make the most of the freezing pro-cess, here are some important hints: the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; the freezing process takes 24 hours. No further food to be frozen should be added during this period; only freeze top quality, fresh and thoroughly cleaned, foodstuffs; prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required; wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; Daily Use

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

2. Z mrazáku odšroubujte horní kryt i s kontrolkou teploty.

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

měkký povrch, tak aby se nepoškrábaly. Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

• Pokud používáte mrazničku poprvé po odmražování, nastavte termostat na 2 hodiny na maximální chlazení, poté vložte potraviny a termostat si upravte na požadovanou hodnotu. Daily Use Temperature Setting Plug on your appliance. The internal temperature is controlled by a thermostat. There are 3 settings MIN, NORMAL and MAX. MIN is warmest setting and MAX is coldest setting. The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often. First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish. Daily use Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Place the fresh food to be frozen in the bottom compartment. The maximum amount of food that can be frozen in 24 hours is specified on the rating plate. The freezing process lasts 24 hours: during this period do not add other food to be frozen. Storing frozen food When first starting-up or after a period out of use, before putting the product in the compartment let the appliance run at least 2 hours on the higher settings. Important! In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked). Thawing Deep-frozen or frozen food, prior to be used, can be thawed in the fridge compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer. Ice-cube This appliance may be equipped with one or more trays for the production of ice-cubes. Helpful hints and tips Hints for freezing To help you make the most of the freezing pro-cess, here are some important hints: the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; the freezing process takes 24 hours. No further food to be frozen should be added during this period; only freeze top quality, fresh and thoroughly cleaned, foodstuffs; prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required; wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; Daily Use

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

2. Z mrazničky odskrutkujte horný kryt aj s kontrolkou teploty.

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

mäkký povrch, tak aby sa predišlo poškriabaniu. Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

Reverse Door Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner. Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process. All parts removed must be saved to do the reinstallation of the door. Do not lay the unit flat as this may damage the coolant system. It' s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

4. Unscrew bottom hinge. Then remove the adjustable feet from both

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable

7. Place the door back on. Ensure the door is aligned horizontally and

vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

• Zbytočne neotvárajte dvere mrazničky. Daily Use Temperature Setting Plug on your appliance. The internal temperature is controlled by a thermostat. There are 3 settings MIN, NORMAL and MAX. MIN is warmest setting and MAX is coldest setting. The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often. First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish. Daily use Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Place the fresh food to be frozen in the bottom compartment. The maximum amount of food that can be frozen in 24 hours is specified on the rating plate. The freezing process lasts 24 hours: during this period do not add other food to be frozen. Storing frozen food When first starting-up or after a period out of use, before putting the product in the compartment let the appliance run at least 2 hours on the higher settings. Important! In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked). Thawing Deep-frozen or frozen food, prior to be used, can be thawed in the fridge compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer. Ice-cube This appliance may be equipped with one or more trays for the production of ice-cubes. Helpful hints and tips Hints for freezing To help you make the most of the freezing pro-cess, here are some important hints: the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; the freezing process takes 24 hours. No further food to be frozen should be added during this period; only freeze top quality, fresh and thoroughly cleaned, foodstuffs; prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required; wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; Daily Use

OHĽAD NA ŽIVOTNÉ PROSTREDIE