KMP81BT - Earphones Krüger&Matz - Free user manual and instructions

Brand	Krüger&Matz
Model	KMP81BT
Product Type	Bluetooth Wireless Headphones
Bluetooth Version	4.1 + EDR
Supported Bluetooth Profiles	HSP, HFP, A2DP, AVRCP
Talk Time	Up to 7 hours
Standby Time	Up to 65 hours
Music Playback Time	Up to 6 hours
Battery Capacity	120 mAh
Charging Time	Up to 3 hours
Power Supply	DC 5 V / 1 A via USB cable
LED Indicator	Yes (blue for connection, red for charging, alternating for pairing)
Built-in Microphone	Yes
Main Functions	Hands-free calls, music play/pause, volume control, voice command, call rejection
Charging Port	Micro USB (inferred)
Multipoint Connection	Yes (up to 2 devices)
Material	Not specified, likely plastic
Maintenance	Clean with a slightly damp cloth; do not use chemicals
Safety	Do not use at high volume for long periods; do not use while driving or in hazardous environments
Repairability	Do not repair yourself; contact an authorized service center
Package Contents	Not specified, may include headphones, USB cable, manual
Country of Origin	People's Republic of China

Frequently Asked Questions - KMP81BT Krüger&Matz

How to turn on the headphones?

Press and hold the MF button for about 2 seconds. The blue indicator flashes 3 times.

How to turn off the headphones?

Press and hold the MF button for about 4 seconds. The red indicator flashes 3 times.

How to pair the headphones with a phone?

Make sure the headphones are off. Press and hold the MF button for about 6 seconds until the indicator blinks red and blue alternately. Enable Bluetooth on your phone, search for devices, and select P81BT. Enter the PIN 0000 if required.

What to do if pairing fails?

Unplug the headphones and perform a new pairing.

How to charge the headphones?

Connect the USB cable to the charging port and to a charger or USB port. The red light turns on during charging and turns off when charging is complete.

Can I use the headphones while driving?

No, it is prohibited to use headphones while driving a motor vehicle, bicycle, or other, as it may compromise safety.

What is the battery life?

Up to 7 hours talk time, 6 hours music playback, and 65 hours standby.

How to skip to the next song?

Slide the button to the + (forward) position during playback.

How to reject an incoming call?

Press and hold the MF button until you hear a beep.

How to clean the headphones?

Use a soft, slightly damp cloth. Do not use chemicals or detergents.

USER MANUAL KMP81BT Krüger&Matz

Wireless earphones KMP81BT

Read this instruction manual before first use and keep it for future reference.

• Minimize the volume on your audio device before connecting the earphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the earphones.
• Never use the earphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.
• Do not use the earphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling).
• Keep this product away from the reach of children.
• Do not disassemble, modify or attempt to repair the earphones. In case of damage, contact an authorized service point for check-up/repair.
• Do not subject the earphones to strong impact.
  DO NOT turn the volume to such a high level that you can't hear anything around you.
• Stop using the earphones if you feel a tinnitus, hearing discomfort, irritation or have other adverse reactions.

PRODUCT DESCRIPTION

1. Built-in microphone
2. Charging port
3. LED Indicator
4. Volume up/down; next/previous song
5. Multifunction button (MF): answer and reject call, pause and play

PAIRING

1. Please make sure your mobile phone has Bluetooth function ON.
2. To enter into the pairing mode, make sure the headset is off. Press and hold multifunction button (MF) for 6 seconds until the red LED and blue LED blink alternately.
3. Please keep the headset and mobile phone in the range of 1 meter when pairing.
4. Make the headset enter into pairing mode (LED is red and blue blinking).
5. Start the Bluetooth function of mobile phone and search for new Bluetooth devices.
6. Select device named "P81BT" enter password: "0000" if necessary.
7. After successful pairing, select "P81BT" in the Bluetooth device list, and press "connect".
8. After successful connection, the blue LED of the headset will keep blinking.

Notes:

• If the pairing is not successful, please switch off headset firstly, and then re-pair again.

• After the successful pairing, you can connect and disconnect the earphones without the need to pair the two devices every time you connect them. To connect the earphones to your phone again, just place them within their operational range, switch on the earphones and turn on the Bluetooth function on your phone.

• This device allows for simultaneous connection to two different devices, just simply repeat the pairing process on both devices.

RE-CONNECTING TO A BLUETOOTH DEVICE

Automatic connecting

Every time the headset is switched on, it will connect to last connected device automatically. Please note, your phone must be on with Bluetooth function turned on:

- Manual connecting

When the headset is in standby mode and doesn't connect to any devices, press multifunction button (MF) once, it will connect to last connected source device automatically.

Notes:

• Before connecting to a Bluetooth device, remember to turn on the Bluetooth function on your external device!

OPERATION

Switch on:

Press and hold multifunctional button (MF) for 2 seconds until the blue LED is on; Blue LED blinks 3 times.

Switch off:

Press and hold multifunctional button (MF) for 4 seconds until the red LED is on; Red LED blinks 3 times.

Voice dial:

In Standby mode, press and hold multifunctional button (MF) until you hear indication sound, then voice dial the person you want to call.

Redial last number:

In standby mode, press multifunctional button (MF) twice.

Z

Answer incoming call:

When ringing, press multifunctional button (MF).

Reject a call:

When ringing, press and hold multifunctional button (MF) until you hear indication sound.

Volume adjustment:

While in conversation, toggle and hold + button to increase volume; toggle and hold - button to decrease volume.

• Please note, some phones may not support

all the functions listed above concerning calls management.

• To switch the call to headset/phone press the multifunctional button (MF).

Play music:

While playing music:

• press multifunctional button (MF) to play/ pause music
• toggle to to go to the next song
• toggle to to go to the previous song
• toggle and hold + button to increase volume; toggle and hold - button to decrease volume

Notes:

• Please note, you have to have checked multimedia streaming option (use for media audio) in your Bluetooth device. To turn off the setting of streaming conversation through earphones, go to Bluetooth connection settings on your smartphone, enter earphones connection details and switch off phone audio control.
• Remote control of last song/next song/ pause, requires your external device supports AVRCP.

CHARGING

1. Insert USB charging cable into USB charger or PC USB port.
2. Connect charging cable to the charging port of headset.
3. When the red light is on, the headset is in

charging.

1. When the red light is off, the headset is fully charged.

Note: Please be sure the battery has been charged fully before first use.

Operation LED Status
Charging Red LED is on
Finish charging Red LED is off
Pairing Red LED & Blue LED flashes alternately
No connection to a device	Blue LED quickly blinks twice every 1 second
Setting up connection	Red LED & Blue LED quickly blink three times every 2 seconds
Low power Red LED blinks twice every 20 seconds

乙

SPECIFICATIONS

• Bluetooth: 4.1 + EDR
• Bluetooth profiles: HSP, HFP, A2DP, AVRCP
• Effective range: up to 10 meters
  Music time: up to 6 hours
• Talk time: up to 7 hours
• Standby time: up to 65 hours
• Input: DC:5 V/1 A
• Battery capacity: 120 mAh
  Charge time: up to 3 hours

Specifications are subject to change without prior notice. "The Lechpol company declares that product KMP81BT is consistent with the essential requirements and other relevant provisions of directive 1999/5/EC. The proper declaration for download from www.lechpol.eu"

English Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.

Made in China for LECHPOL Zbigniew Leszek, Mietne, 1 Garwolinska Street, 08-400 Garwolin.

CONSIGNES DE SECURITE

KrügerMatz is a registered trademark