KM0628 - Earphones Krüger&Matz - Free user manual and instructions

Product type	Over-ear Bluetooth headphones
Brand	Krüger&Matz
Model	KM0628
Connectivity technology	Bluetooth 3.0 + EDR, wired AUX 3.5 mm
Supported Bluetooth profiles	HSP, HFP, A2DP, AVRCP
Bluetooth range	Up to 10 m
Speakers	40 mm
Frequency response	20 Hz ~ 20 kHz
Impedance	32 Ω
Sensitivity	105 dB ± 3 dB
Sound distortion	≤ 0.5% (1 kHz)
Max input power	20 mW
Music playing time	Up to 7 h
Talk time	Up to 9 h
Standby time	Up to 180 h
Battery	250 mAh, lithium
Power supply	5V / 500mA via microUSB
Microphone	Built-in, sensitivity -55 ± 3 dB
AUX input	3.5 mm
Charging port	MicroUSB
Maintenance	Clean with a soft, slightly damp cloth; do not use chemical products
Safety	Avoid prolonged listening at high volume; do not use in hazardous situations (driving, etc.); protect from shocks and moisture
Repairability	Do not repair yourself; contact an authorized service
General information	Made in China for Lechpol Electronics; compliant with directive 2014/53/EU

Frequently Asked Questions - KM0628 Krüger&Matz

How to connect the headphones via Bluetooth?

Press and hold the MFB button until the indicator flashes blue (pairing mode). Activate Bluetooth on your device, search for "KM Flow 2" and connect. If a PIN is requested, enter "0000".

How to turn the headphones on and off?

To turn on, press and hold the MFB button until the blue indicator lights up. To turn off, do the same until the indicator goes out.

How to answer or end a call?

Briefly press the MFB button to answer or end a call. To reject, hold the MFB button. To redial the last number, quickly press twice.

How to change track or adjust volume?

During music playback, press the Prev/VOL+ button to go to the previous track or hold it to increase volume. Press Next/VOL- for next track or hold to decrease volume.

How to use the headphones in wired (AUX) mode?

Plug the 3.5mm AUX cable into the headphones' AUX input, then the other end into your audio source. The headphones automatically switch to AUX mode, but the controls are then inactive.

How to charge the headphones?

Connect the microUSB cable to the charging port of the headphones and to a USB charger (5V/500mA) or a computer. The red indicator lights up during charging and turns off when fully charged. Before first use, fully charge the battery.

What is the battery life?

The battery life is about 7 hours of music playback, 9 hours of talk time, and up to 180 hours of standby. The 250 mAh lithium battery charges via microUSB.

What to do if the headphones do not pair?

Make sure the headphones are in pairing mode (blue flashing indicator). If pairing does not happen within 5 minutes, the headphones automatically turn off. Then repeat the procedure. Also check that your source device is nearby and Bluetooth is activated.

Are the headphones water-resistant?

No, the headphones are not water-resistant. Protect them from moisture, water, and other liquids. Do not use them in rain or humid environments.

How to clean the headphones?

Clean with a soft, slightly damp cloth. Never use chemical products or detergents. Turn off the device before cleaning and avoid getting moisture into the openings.

USER MANUAL KM0628 Krüger&Matz

Read this instruction manual before first use and keep it for future reference.

• Minimize the volume on your audio device before connecting the headphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the headphones.
• Never use the headphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.
• Do not use the headphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling).
• Do not disassemble, modify or attempt to repair the headphones. In case of damage, contact an authorized service point for check-up/repair.
• Do not subject the headphones to strong impact.
  DO NOT turn the volume to such a high level that you can't hear anything around you.
• Stop using the headphones if you feel a tinnitus, hearing discomfort, irritation or have other adverse reactions.
• Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
• Never use this device if it is damaged.
• Use only authorized accessories.
• Turn off the headphones before cleaning.
• Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

PRODUCT DESCRIPTION

1. Multifunctional button MFB
2. Prev/VOL +
3. Next / VOL -
4. LED indicator
5. microUSB port
6. AUX input (3,5 mm)

PAIRING

1. Press and hold MFB. The headphones will turn on and automatically enter Bluetooth pairing mode. Blue LED flashes.
2. Activate your phone (or device) Bluetooth function and search for external devices. You'll see a list of available devices; find and connect with the headphones (KM Flow 2).
3. Enter "0000" PIN if necessary.
4. After successful pairing, the headphones will issue a voice prompt.

Notes:

• If pairing is not completed within 5 minutes, the headphones will turn off. In that case, repeat paring process to pair the headphones with external device.
• Every time the headphones are switched on, they will connect to last connected device automatically. Please note, your device must be on with Bluetooth function turned on.

OPERATION

Power on:

Press and hold the MFB; blue LED is on.

Power off:

Press and hold the MFB; blue LED is off.

Answering/Ending/Rejecting/Redialing:

Press MFB to answer/end an incoming call. Press and hold MFB to reject an incoming call. Press MFB twice to redial.

Play music:

• Press MFB button to play/pause music playback.
• Press Prev / VOL + button to go to the previous track. Press and hold this button to increase volume.
• Press Next / VOL - to go to the next track. Press and hold this button to decrease volume.

AUX INPUT

1. Use 3,5 mm AUX cable and connect one end of the cable into the headphones' 3,5 mm input.
2. The headphones will automatically enter AUX mode.
3. Connect the other end into the 3,5 mm input of the device you wish to play music from.
4. Start playing music from your device.

Note: In AUX mode, control panel of the headphones is not active.

CHARGING

1. Before charging, make sure the headphones has been switched off.
2. Plug microUSB cable into the charging port of the headphones; plug the other side of USB cable into the USB charger, AC/DC adapter or car charger.
3. Red indicator light is ON when battery is charging.
4. When charging is finished, red LED goes off.

Note: Please be sure the battery has been charged fully before first use.

SPECIFICATIONS

• Speaker size: 40 mm
  Frequency response: 20Hz 20kHz
  Impedance: 32 Ω
• Sensitivity: 105 dB ± 3 dB
  Distortion: ≤ 0,5% (at 1kHz
  Maximum input power: 20mW
• Bluetooth: 3.0 + EDR
• Bluetooth profiles: HSP, HFP, A2DP, AVRCP
• Bluetooth range: up to 10 m
• Ports: AUX-in (3,5 mm), microUSB (charging)
• Playback time: up to 7 h
• Talk time: up to 9 h
• Standby time: up to 180 h
• Battery capacity: 250 mAh
• Charging voltage: 5V / 500mA
  Built-in microphone
• Microphone sensitivity: -55 ± 3 dB
  Voice call management

LEARN MORE

For more information on this product, go to www.krugermatz.com.

Visit www.krugermatz.com website for more products and accessories.

In case of any doubts or questions reach out to our Frequently Asked Questions section.

"The Lechpol company declares that product KM0628 is consistent with the essential requirements and other relevant provisions of directive 2014/53/UE. The proper declaration for download from www.lechpol.eu"

English

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolinska1, 08-400 Mietne.

CONSIGNES DE SECURITÉ

Krüger&Matz is a registered trademark