Street Kids KM0656 - Earphones Krüger&Matz - Free user manual and instructions

Technical Features	In-ear headphones, Bluetooth connectivity, 10 hours battery life, 10 meters range.
Usage	Ideal for children, easy to use with built-in controls, compatible with most Bluetooth devices.
Maintenance and Repair	Regular cleaning with a soft cloth, avoid exposure to water, no replaceable parts.
Safety	Use at a reasonable volume to protect hearing, do not use while driving or crossing roads.
General Information	Lightweight and ergonomic design, available in multiple colors, 2-year manufacturer warranty.

Frequently Asked Questions - Street Kids KM0656 Krüger&Matz

How can I connect my Kr\u00fcger\u0026Matz Street Kids KM0656 headphones to my device?

To connect your headphones, enable Bluetooth on your device, then power on the headphones. They should appear in the list of available devices. Select them to establish the connection.

What should I do if my headphones do not connect to my device?

Make sure your headphones are charged and in pairing mode. If the problem persists, try restarting your device and reset your headphones by holding the power button for 10 seconds.

How can I adjust the volume on my headphones?

Use the volume buttons located on the side of the headphones. Press the '+' button to increase the volume and the '-' button to decrease it.

Are the Kr\u00fcger\u0026Matz Street Kids KM0656 headphones water-resistant?

No, the headphones are not designed to be water-resistant. It is recommended to keep them away from moisture and water.

How can I clean my headphones?

To clean your headphones, use a soft, dry cloth. Avoid using chemicals or liquids that could damage the components.

What is the battery life of the Kr\u00fcger\u0026Matz Street Kids KM0656 headphones?

The battery life is approximately 6 hours of continuous listening, depending on volume and usage.

How can I reset my headphones?

To reset your headphones, hold the power button for 10 seconds until the lights flash. This will restore factory settings.

Are the headphones compatible with all devices?

The headphones are compatible with all devices that have Bluetooth technology. However, some features may vary depending on the device.

What should I do if the sound is low or poor quality?

Check the volume level on your device and make sure it is at an appropriate level. If the problem persists, try disconnecting and reconnecting the headphones.

Do the Kr\u00fcger\u0026Matz Street Kids KM0656 headphones have a warranty?

Yes, the headphones are generally covered by a 2-year warranty against manufacturing defects. Please refer to the user manual for more details.

USER MANUAL Street Kids KM0656 Krüger&Matz

AUX MODE Connect one plug of the 3,5 mm jack cable to the AUX input of headphones, then connect the other plug to the AUX output of external device. In AUX mode, music is controlled by the external device. CHARGING

1. Connect one plug of the USB cable to the micro USB port of the

2. Connect the other plug to the compatible PC USB port.

3. During charging, red LED is on.

4. When the battery is fully charged, the red LED goes o.

SAFETY INSTRUCTIONS Read the instruction manual before rst use and keep it for future reference.

• Minimize the volume on your audio device before connecting the headphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the headphones. To prevent damage to your hearing, do not raise the volume too high.

• Do not use the headphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling). Never use the headphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.

• Stop using the headphones if you feel a tinnitus, hearing discomfort, irritation or have other adverse reactions.

• Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for check-up/repair.

• Do not subject the headphones to strong impact.

• Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

• Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.

• Never use this device if it is damaged.

• Use only authorized accessories.9 Owner’s manual

5. button (call management/

OPERATION Function Operation Turn on/ o Press and hold the

button for about 4 seconds Enter Bluetooth pairing mode When the headphones are turned o, press and hold the

button for about 6 seconds Play/ pause music Press the button Increase/ decrease volume Press the +>> / <<- button Go to next/ previous track Press and hold the +>> / <<- button for about 3 seconds Answer/ end a call Press the button Reject a call Press and hold the button for about 2 seconds10 Owner’s manual

1. With the headphones turned o, press and hold the

button for about 6 seconds. The headphones will turn on and enter Bluetooth pairing mode. Blue and red LED ash.

2. Enable Bluetooth function on an external device and search for new

3. Select and connect with this device (KM Street Kids).

4. After successful pairing, LED ashes blue every 10 seconds.

• Every time the headphones are switched on, they will connect to last connected device automatically. Please note, your device must be on with Bluetooth function turned on. To disable automatic pairing, clear pairing list. Switch on the headphones, then press and hold the <<- and +>> buttons simultaneously for about 12 seconds. Then press and hold the

button to turn o the headphones. When you turn on the headphones again, they will not pair automatically with external device.

• If pairing is not completed within 5 minutes, the headphones will automatically turn o. In that case, repeat the pairing process to pair the headphones with external device.

• In case of problems with pairing, you may have to clear pairing list (see point one).

• When the headphones are paired with external device, it is possible to stream music to another pair of headphones by connecting them with the included 3,5 mm jack cable. Music is controlled by the headphones paired with the external device. AUX MODE Connect one plug of the 3,5 mm jack cable to the AUX input of headphones, then connect the other plug to the AUX output of external device. In AUX mode, music is controlled by the external device.11 Owner’s manual

1. Connect one plug of the USB cable to the micro USB port of the

2. Connect the other plug to the compatible PC USB port.

3. During charging, red LED is on.

4. When the battery is fully charged, the red LED goes o.

SPECIFICATION Speaker size: 30 mm Frequency response: 20 Hz - 20 kHz Impedance: 32 Ohm Sensitivity: 93 dB+/-5 dB (at 1 kHz) SPL: 89 dB Supported formats: SBC, MP3, AAC Bluetooth: 4.2 Bluetooth proles: A2DP, AVRCP, HFP Bluetooth range: up to 8 m Talk time: up to 13 h Playback time: up to 15 h Standby time: up to 200 h Ports: AUX-in (3,5 mm), micro USB (charging) Built in microphone Battery capacity: 400 mAh Power supply: 5 V, 500 mA In set: 3,5 mm jack cable, charging cable, user’s manual12 Owner’s manual

English Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government oce, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal. Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne. Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that wireless headphones KM0656/ KM0657 is consistent with directive 2014/53/UE. Full text of the EU Declaration of Conformity is available at following Internet address: www.lechpol.eu. LEARN MORE For more information on this product, go to www.krugermatz.com. Visit www.krugermatz.com website for more products and accessories. In case of any doubts or questions reach out to our Frequently Asked Questions section.Mode d’emploi