AEG SB9300 - Blender

SB9300 - Blender AEG - Free user manual and instructions

Find the device manual for free SB9300 AEG in PDF.

📄 48 pages English EN Download 💬 AI Question ⚙️ Specs
Notice AEG SB9300 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
SKIP

Frequently Asked Questions - SB9300 AEG

User questions about SB9300 AEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Blender in PDF format for free! Find your manual SB9300 - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SB9300 by AEG.

USER MANUAL SB9300 AEG

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website to:

AEG SB9300 - Visit our website to: - 1

Get usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice

AEG SB9300 - Visit our website to: - 2

Register your product for better service: www.registeraeg.com

AEG SB9300 - Visit our website to: - 3

Buy Accessories and Consumables for www.aeg.com/shop

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available:

  • Model Number
  • PNC number
  • Serial number

The information can be found on the rating plate.

AEG SB9300 - CUSTOMER CARE AND SERVICE - 1

AEG SB9300 - CUSTOMER CARE AND SERVICE - 2

www.aeg.com

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.

COMPONENTS

A. Jug
B. Spout
C. Lid with filler hole
D. Measuring cup

E. Blades and blade assembly
F. Motor housing with cord storage
6. Control panel with display
H. Non-slip feet

Picture page 2-3

GETTING STARTED

Before using the blender for the first time, wash all parts except for the motor housing. The jug can also be washed in dishwasher.
Caution! The blades are very sharp!
Note! The blade assembly is not removable.
2 Place the blender jug with the handle towards the front, onto the motor housing (The jug can only be placed in one position).
Put the ingredients in the jug.
(Do not exceed the maximum level as indicated on the jug.)
3 Close the lid (A) and insert the measuring cup in the filler hole and (B) lock into position. (You can use the measuring cup to add ingredients while the blender is running. Close the filler hole immediately after, to avoid splashing.)
Caution! Never run the blender empty. When processing hot liquids, see step 4.
4 Processing hot liquids: We recommend to allow hot liquids to cool down (max 90^ ) before filling the jug. Fill the jug only half full and start processing on low speed. The blender jug can become very warm – take care to protect your hands and to ventilate steam out through the filler hole. Always replace the lid before use.
5 Start the blender: Plug into mains. Press the Power button (A), the LED light will illuminate and the display becomes visible. Press the 1 (Low), 2 (Medium) or 3 (High) button (B), to select your desired processing speed.
It is also possible to choose one of the ready programs for ice crushing, drinks, soups or smoothie. Press the button to start and the light will indicate the program selected. The blender will operate max for 120 seconds, or until the program is finished. To stop manually, press any button.
7 Caution! Keep hands and utensils out of the blending jug while blending. After processing heavy loads, let the appliance rest for 5 minutes before next use.
8 Boost Function: Press the "Boost" button (A) and hold it down for pulsing, when you need a short burst of power.

Smoothie Function: Press the "Smoothie" button once (B) to get ice crushed and your smoothie blended to the

desired consistency with the specific program. The blender will stop automatically when the program is ready.

9 Ice Crush Function: Press the "Ice Crush" button (A) to start the Ice Crush program. (For best results, work in small batches.)

Drink Function: Press the "Drink" button (B) to mix a drink.

Soup Function: Press the "Soup" button (C) to mix soup.

Caution! Never run the blender empty. When processing hot liquids, see step 4.

CLEANING AND CARE

10 Quick cleaning: Pour warm water into the jug, add a few drops of detergent. Mix water and detergent by pressing the "Boost" button. Finally, rinse the jug under running water.

Note: To avoid crazing of the jar, always rinse the jar with clean water directly after using in order to prevent the plastic material being impacted by acids or essential oils. Always rinse the jar clean even before placing it into the dishwasher.

Thorough cleaning of the motor housing and interface: Turn the blender off and unplug the power cord. Wipe the motor housing with a damp cloth.

AEG SB9300 - CLEANING AND CARE - 1

Warning! Never immerse the housing, plug, or cord in water or any other fluid.

AEG SB9300 - CLEANING AND CARE - 2

Thorough cleaning of the jug:

Note! The Blade assembly is not removable.

Remove the lid and measuring cup. Rinse the blade assembly in water and detergent and place then lid, measuring cup and jug into the dishwasher for thorough cleaning.

Caution! Handle carefully, the blades are very sharp!

Enjoy your new AEG product!

SAFETY ADVICE

Read the following instruction carefully before using the appliance for the first time.

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
    Children should be supervised to ensure that they do not play with the appliance.
  • The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!
  • Never use or pick up the appliance if - the supply cord is damaged, - the housing is damaged.
  • If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard.
    Always place the appliance on a flat, level surface.
  • Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
  • Never touch the blades or inserts with your hand or any tools while the appliance is plugged in.
  • The blades and inserts are very sharp! Danger of injury!
    Do not immerse the appliance in water or any other liquid.
  • Do not let the blender run for more than 2 minutes at a time using heavy loads. After running for 2 minutes with heavy loads, the blender should be left to cool for at least 5 minutes.
  • Do not exceed the maximum filling volume as indicated on the appliances.
  • Never process boiling liquids (max 90^ ).
  • Do not use this appliance to stir paint. Danger, could result in an explosion!
  • Never operate appliance without lid.
  • Do not let the power cord touch hot surfaces or hang over edge of table or counter.
  • Never use accessories or parts made by other manufactures not recommended or sold; may cause a risk of injury to persons.
  • The appliance can not be used for blending or grinding hard and dry substance, except for ice cubes.
  • Keep hands and utensils out of the blender during operation to reduce the risk of severe injury to persons or damage to the blender.
  • Ensure that the blender is switched off before removing it from the stand.
  • Do not attempt to remove the blade assembly.
  • Care shall be taken when handling the sharp cutting blades, emptying the bowl and

www.aeg.com

during cleaning.

  • Be careful if hot liquid is poured into the appliance as it can be ejected out of the appliance due to a sudden steaming.
  • Switch off the appliance and disconnect from supply before approaching parts that move in use.
  • If the product is left on without using any speed or programs, it will automatically turn off after 3 minutes.
  • Be careful if hot liquid is poured into the appliance as it can be ejected out of the appliance due to a sudden steaming.
  • This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.
    DO NOT OPERATE WITHOUT THE COVER IN PLACE.

RECIPES

2 min 1500 ml

MAXIMUM PROCESSING TIME WITH HEAVY LOAD MAXIMUM CAPACITY

RECOMMENDED BLENDING SPEED
Recipe Ingredients Quantity Time Speed
Pureeing raw vegetablesCarrots 20~160 g30 s Setting 3 (Max speed)
Potatos 20~160 g
Onions 20~160 g
Water 40~320 g
Strawberries margaritas (Cocktail)Tequila240ml≤ 90 s Drink
Triple sec60ml
Frozen strawberries225 g
Frozen Lemonade concentrate145g
Ice cubes150g
Pineapple-apricots SmoothiePineapple in slices250g≤ 120 s Smoothie
Dried Apricots40g
Yoghurt300g
Soup (Certification recipe)Carrots 640~660 ml≤ 60 s Setting 3 (Max speed)
Water 840~860 g
Raspberries SmoothieFrozen raspberries250g≤ 60 s Setting 3 (Max speed)
Banana (% pcs)50g
Water 100 ml
Caster sugar (1 Tbs)10g
MilkshakeMilk150-300ml15~30 s Smoothie
Vanilla ice cream200-400g
Banana 1/4 - 1/2 pcs
Chocolate syrup30-60g

www.aeg.com

RECOMMENDED BLENDING SPEED
TROUBLESHOOTING

Recipe Ingredients Quantity Time Speed
Potato leek soupPotatoes 400 g45~60 sSoup
Leek 400 g
Water 800 g
Pancake (Batters)Wheat flour 150 g30~40 sSmoothie
Salt 1 Pinch
Eggs 3 pcs
Milk250ml
Water 140 ml
Butter 50 g
SYMPTOMCAUSESOLUTION
The blender does not switch on.Jug/base are not fixed properly.Check if all the components are in correct position. Note! the jug can only be placed on the base with handle towards the user interface.
The Power button is not pressed.Make sure the Power button is illuminated. If not, press the Power button to turn the blender on.
The motor has overheated. The display is blinking.Wait until the product has cooled down and all the buttons are lit.
The plug is not properly connected to the power outlet.Check the connection of the plug to the outlet or try another outlet.
Power outage. Wait until power outage is over.
Functional problem.Contact authorized service.

DISPOSAL

AEG SB9300 - DISPOSAL - 1

This symbol on the product indicates that this product contains a battery which shall not be disposed with normal household waste.

AEG SB9300 - DISPOSAL - 2

This symbol on the product or on its packaging indicates that the product may not be treated as household waste. To recycle your product, please take it to an official collection point or to an AEG service center that can remove and recycle the battery and electric parts in a safe and professional way. Follow your country's rules for the separate collection of electrical products and rechargeable batteries.

AEG reserves the right to change products, information and specifications without notice.

DEUTSCH

a a a a a a a a a a a a a a a a a a a a

1

AEG

auii iua

1

J 1

1 1

e 1000

Jg j 1

gol goll 100000000000000000000000000000000000000

  1. = ( x1,y1) , = ( x2,y2)

1 1

aiaai aiei jaae iiaai 1 1 1 1 1 1 1 1 1 1 1 1

J 1

g 1

45 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

.

AEG jie jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jai

LiS

CJ 1e aegaae J.E

A

all cga, g aal C. F

A. B.

A

C. a, b, c

juiua H

yS.D

3-2 0

1

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a#

aie aiee aiee ae eae ee eae (B) 0al 0ra (jace) "Smoothe, jle biai: yaa

zalilalplai sie lali blll cijn jao zalj

cllll (C) (clua) "Soup, JJ le laiai; plall 4yB

e yall gjaii jilg jusie iilba e jia g a b kll J

A

j jie biaiily cbiial y clal baiy pa. biial no ci kaiy gaiy iaiy iaiy iaiy iaiy

Jll clll 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

. 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

jai jia jia jia jia jia jia jia jia jia jia jia jia jia

.

j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j

jJlJwJwBwOoDg yod AizIw Cbe b jol j j

j

4.1 (1) | x - 2| = 52 - | x + 1| = 32 - | x + 3|

1 1

S = u_i

j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j

olsiud 1iia sla iua

Jyjg Jla aE
sJyJ Ldy jda
F
JyJLJyJyJyG
JyJyJyJyH

A
B
C
D

3-2 4

JSE

J 1

()

(B)a 1200000000000000000000000000000000000000000000000

j 90

()3()2.()1(B)4()

120 111 111 111 111 111 111 111

j 50

m = 311

GB

DE

AR

ES

FA

GR

IT

S

PT

AEG SB9300 - m = 311 - 1

AEG SB9300 - m = 311 - 2

d

aaii aai iiaai 1000 45 45 45 45 45 45 45 45 45 45

J 1

AEG clss

AEG SB9300 - d - 1

AEG SB9300 - d - 2

FRANCAIS

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : AEG

Model : SB9300

Category : Blender