MFQ4780 - Hand blender BOSCH - Free user manual and instructions

USER MANUAL MFQ4780 BOSCH

MFQ4-Zubehör_de-ar.book Seite 2 Montag, 19. Januar 2015 3:45 15Robert Bosch Hausgeräte GmbH 3 For your safety This accessory is designed for the hand mixer MFQ4... . Follow the Instructions for Use for the hand mixer. Do not attach or remove hand mixer until the appliance is at a standstill. The accessories are suitable only for the use described in these instructions. , Safety instructions for this appliance Risk of electric shock! Do not immerse the appliance in liquid above the joint between the high-speed hand blender and base unit. Risk of injury from sharp blade/rotating drive! Never grip the blade in the universal cutter. Never clean cutting blade with bare hands. Use a brush. Take hold of the cutter blade by the plastic handle only. Never grip the blade on the high-speed hand blender. Never clean the hand blender blade with bare hands. Use a brush. Risk of scalding! Caution when processing hot liquids. Liquids may splash during processing. Before using the high-speed hand blender in a cooking pot, take the pot off the hotplate. Important! Do not attach or remove accessories until the appliance is at a standstill. The universal cutter must be completely assembled before use. Never use the high-speed hand blender in the universal cutter jug. The universal cutter jug is not microwave-safe. Never immerse the attachment of the universal cutter in liquids and do not clean under flowing water or in the dishwasher. Before use, read these instructions carefully in order to become familiar with important safety and operating instructions for this appliance. Please keep the operating instructions in a safe place. If passing on the appliance to a third party, always include the operating instructions. On account of the different models, it is possible that not all accessories are included in your set. These are also available separately from customer service. Before using the appliance for the first time, clean all parts of it.

1 Universal cutter jug 2 Blade 3 Attachment 4Lid Operation The universal cutter is suitable for cutting meat, hard cheese, onions, herbs, garlic, fruit, vegetables, nuts, almonds. Always observe the maximum quantities and processing times in the table (Fig.

Warning! The universal cutter must be completely assembled before use. Caution! Before cutting meat, remove gristle, bones and sinews. The universal cutter is not suitable for cutting very hard items (coffee beans, radishes, nutmeg) and frozen food (fruit, etc.). Fig. Place the universal cutter on a smooth, clean work surface and press. Insert the blade. Add food. Place the attachment on the universal cutter and rotate in a clockwise direction until it “clicks” into position. Open the lock of the rear aperture and hold in place. Place the base unit on the attachment and lock into position. Insert the mains plug. Hold the base unit and universal cutter firmly and switch on the appliance at setting M. Switch off the appliance after processing. Place the lid on the universal cutter to keep in the processed ingredients. After using the appliance/cleaning Warning! Never immerse the attachment of the universal cutter in water and do not clean under flowing water or in the dishwasher. Press the release buttons and remove the base unit from the attachment. Rotate the attachment in an anti- clockwise direction and remove from the universal cutter. Take hold of the blade by the plastic handle and take out. Universal cutter and blade are dishwasher-proof. Wipe the attachment with a damp cloth only. High-speed hand blender Overview Please fold out the illustrated pages. Fig.

5 High-speed hand blender made of plastic 6 High-speed hand blender made of stain- less steel 7 Hand blender blade Operation For blending mayonnaise, sauces, mixed drinks, baby food, cooked fruit and vegetab- les and for processing ice. For puréeing soups. Use the universal cutter for cutting/chopping raw food (onions, garlic, herbs)!

Risk of injury from sharp blade/ rotating drive! Never grip the blade in the universal cutter. Never clean cutting blade with bare hands. Use a brush. Take hold of the cutter blade by the plastic handle only. Risk of electric shock! Do not immerse the appliance in liquid above the joint between the high-speed hand blender and base unit. Risk of injury from sharp blade/ rotating drive! Never grip the blade on the high-speed hand blender. Never clean the hand blender blade with bare hands. Use a brush. MFQ4-Zubehör_de-ar.book Seite 4 Montag, 19. Januar 2015 3:45 15Robert Bosch Hausgeräte GmbH 5 Fig. Open the lock of the rear aperture and hold in place. Place the high-speed hand blender on the base unit and lock into position. Insert the mains plug. Put food in the blender jug or in another tall jug. The high-speed hand blender works better if there is some liquid in the ingredients. Grip appliance and jug and switch on appliance (setting M). To prevent the ingredients from splashing, do not switch on the base unit until the high-speed hand blender is immersed in the ingredients. Always switch off the appliance before taking it out of the processed food. Switch off the appliance after processing. Remove mains plug. Place the lid on the blender jug to keep in the processed food. After using the appliance/cleaning Warning! Surfaces may be damaged. Do not use abrasive cleaning agents. Press the release buttons and remove the high-speed hand blender from the base unit. Hold the lock of the rear aperture in place to prevent the high-speed hand blender from jamming. Clean the high-speed hand blender in the dishwasher or with a brush under running water. Dry the high-speed hand blender in an upright position (high-speed hand blender face up) so that any trapped water can run out.