306646 - Sander Arendo - Free user manual and instructions

Technical Features	Arendo 306646 belt sander, 800 W power, variable speed from 150 to 300 m/min, belt width 76 mm, belt length 457 mm.
Usage	Ideal for sanding wood, metal, and plastic surfaces, suitable for finishing and preparation work.
Maintenance and Repair	Regularly check the condition of the sanding belt, clean the dust filter, and lubricate moving parts if necessary.
Safety	Use safety glasses and a dust mask, do not touch moving parts during operation.
General Information	Lightweight for optimal handling, ergonomic design for prolonged user comfort.

Frequently Asked Questions - 306646 Arendo

How do I change the sanding paper on the Arendo 306646 sander?

To change the sanding paper, turn off the sander and unplug it. Remove the used paper by detaching it from the fastening points. Align the new sanding paper on the sander base and press firmly to secure it.

Why won\'t my Arendo 306646 sander start?

First, check that the sander is properly plugged in. Make sure the switch is in the "ON" position. If it still won\'t start, check the power cord for damage.

How do I clean the Arendo 306646 sander after use?

Unplug the sander and use a dry cloth to remove dust from the outer surface. For hard-to-reach areas, use a soft brush. Do not use water or liquid products.

What is the power of the Arendo 306646 sander?

The Arendo 306646 sander has a power of 240 W, making it suitable for various sanding tasks.

Is the Arendo 306646 sander suitable for sanding wood surfaces?

Yes, the Arendo 306646 sander is designed to effectively sand wood surfaces as well as other materials like plastic and metal.

How do I adjust the speed of the Arendo 306646 sander?

The Arendo 306646 sander is equipped with a speed controller. Turn the speed adjustment knob to set the speed according to your sanding needs.

What should I do if the sander overheats during use?

If the sander overheats, turn it off immediately and unplug it. Let it cool down for at least 30 minutes before using it again.

What types of sanding paper can I use with the Arendo 306646 sander?

You can use sanding papers with grit from 80 to 240, depending on the desired finish. Make sure they are compatible with the sander\'s fastening system.

Is the Arendo 306646 sander under warranty?

Yes, the Arendo 306646 sander typically comes with a 2-year warranty. Check the warranty conditions in the user manual.

USER MANUAL 306646 Arendo

QR code image containing encoded data, no visible human-readable text

ENG: Current drivers, user manuals and other relevant documents for this product can be found on our homepage.

⚠️ Important safety guidelines for this appliance

• Check the product for damage every time before use. The appliance should not be used if it is damaged.
• Do not modify or repair the appliance.
• Caution! The blade unit is very sharp!
• Never touch the blades of the blade unit.
• Children should not play with the appliance.
• Do not insert any body parts or items that they are not intended for the purpose, into the appliance.
• The appliance is intended for personal use only.
• Misusing the product could lead to possible injury.

arengio

• The appliance may be blocked during use. In this case turn the product upside down (in the On position) and loosen the adjustment mechanism to clear the blockage.
• Remove the batteries if the appliance is not going to be used for a long time.
• Please always keep it clean and avoid contact with water.
• The spice grinder is suitable for coarse salt and pepper corns.

Thank you for choosing an Arendo product. Please read the following user manual carefully so as to get the most from the product you have purchased. Before using the product, first check that the delivered item is complete, accurate and undamaged.

1. Scope of delivery

• Spice grinder
• User manual

2. Technical data

Power supply Six AAA 1.5V batteries

Max. filling quantity about 50-100 g

Features • various grinding levels• Sensor-controlled (standby mode when the appliance is placed with the grinding head facing up)

3. Product details

Lid Grinding head Chamber (for filling) Battery compartment 6x Base

4. Inserting the batteries

1. Unscrew the cap at the bottom of the appliance.
2. Remove the battery compartment from the housing.
3. Insert 6 AAA 1.5 V batteries into the battery compartment.
4. Replace the battery compartment back into the housing and screw the cap back on.

5. Filling the appliance

1. Place the appliance in an upright position and remove the grinder head by holding the housing and turning the head counter-clockwise.
2. Fill the chamber with salt or pepper through the side opening. Take care not to fill too much. This prevents overfilling the grinder.
3. Replace the head and turn clockwise to lock it.

6. Initial use

To start grinding, turn the grinder upside down, so that the head is facing down. The appliance automatically starts to grind.

Turn the grinding level dial, which is located on the grinding head to vary from fine to coarse grinding.

7. Cleaning and Care

Do not immerse the appliance in water.

• Remove the batteries before cleaning.
• Dismantle all the parts.
• Wipe the appliance with a damp cloth.

8. Safety instructions and disclaimer

Never try to open the appliance to repair or make modifications. Avoid contact with the mains voltage. Do not short-circuit the product. The appliance is not approved for outdoor use. Therefore please use it only in dry surroundings. Protect it from high humidity, water and snow. Do not expose the appliance to high temperatures. Do not expose the appliance to sudden changes in temperature or strong vibrations, as this could damage the electronic components.

Check the appliance for damage before using it. The appliance should not be used if it has been subject to impact or has been damaged in any other manner. Please comply with the local regulations and restrictions. Do not use the appliance for purposes other than those described in the user manual. This product is not a

toy. Keep it out of the reach of children or mentally disabled persons. Any repair or modification to the appliance, which is not carried out by the original supplier, will void any warranty and guarantee claims. The appliance should only be used by those who have read and understood this user manual. The specifications of the appliance may be changed without any special prior notification.

9. Disposal instructions

In line with the European WEEE directive, electrical and electronic appliances should not be disposed of along with domestic waste. Their components have to be sent separately for recycling or disposal, as improper disposal of toxic and dangerous components may permanently damage the environment.

According to the electrical and electronic equipment act (ElektroG), you are obliged (as a consumer) to return (free of charge) electrical and electronic appliances to the manufacturer, the point of sale or public collection points at the end of their service life. The relevant local laws regulate the details in this regard. The symbol displayed on the product, in the user manual or/and on the packaging refers to these regulations. With this manner of sorting, recycling and disposal of used appliances, you make an important contribution towards protecting our environment.

This label indicates that this product should not be disposed of with other household waste throughout the EU. In order to prevent any damage to the environment or user health from uncontrolled waste disposal, dispose of this product in a responsible manner to ensure sustainable reuse of raw materials. To return your used appliance, please use the return and collection system or contact the dealer where the product was purchased. You can use this product for environmentally safe recycling. For information on authorised collection points in your area, please contact your local city or municipal administration.

10. Instructions for battery disposal

In conjunction with the sale of batteries along with the supply of appliances that include batteries, the supplier is obliged to point out the following to the customer: The customer is legally obliged to return used batteries. He can return used batteries which the supplier offers or has offered as new batteries in his assortment

free of charge to the supplier's dispatch warehouse (shipping address). The symbols shown on the batteries indicate the following: Pb = battery contains more than 0.004 percent lead by weight, Cd = battery contains more than 0.002 percent cadmium by weight, Hg = battery contains more than 0.0005 percent mercury by weight.

The symbol of the crossed-out dustbin means that the battery should not be disposed of in household waste.

WEEE directive 2012/19/EU

WEEE Register no.: DE 67896761

The company WD Plus GmbH hereby certifies that the appliance 305899 / 306646 / 306647 complies with the fundamental requirements and all other relevant stipulations. A complete conformity statement can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover

MO-FR 9:30am - 18pm CET

QR code image containing encoded data, no visible human-readable text

www.arendo.de