RIG 500 Pro - Helmet PLANTRONICS - Free user manual and instructions

USER MANUAL RIG 500 Pro PLANTRONICS

Support3 Setup and basics Fit The headband adjusts to three sizes (small, medium, large) by moving the earcups. To remove an earcup, press the earcup to detach it from the headband. To change your ear cushions, gently pull the ear cushion off. To replace it, align the notches. Your headset components easily snap into the headset frame to configure the best fit and sound. Follow the diagram to put your headset together. Connect to PC RIG 500 PRO, RIG 500 PRO ESPORTS Set up your headset

Adjust the volume Connect to console RIG 500 PRO ESPORTS, RIG 500 PRO HC, RIG 500 PRO HX/HX SE Out of the box, the volume wheel has the Xbox One sleeve attached and the PS4 sleeve is supplied (the RIG 500 PRO HS/HS SE models have the PS4 sleeve attached and the Xbox One sleeve is supplied). Align notches on the appropriate sleeve and volume wheel before attaching to your controller. To adjust your headset volume, turn the volume wheel. NOTE If your controller has a volume feature, you can lock the volume wheel at maximum by turning it fully to the right. Xbox One sleeve attached PS4 sleeve supplied in box ALIGN Xbox One PS45 System volume Mute To adjust system volume, check your console’s user guide. Lift the boom to a full stop to mute the microphone. CAUTION Do not force the boom past its upper or lower limits.NEED MORE HELP? www.nacongaming.com NACONG GAMING, Inc 10400 NE 4