Jumper - Stroller BabyGO - Free user manual and instructions

Frequently Asked Questions - Jumper BabyGO

USER MANUAL Jumper BabyGO

BabyGO • www.babygo.eu Dear Parents: Congratulations on the purchase of our pram. Safety, comfort and user-friendliness played an im- portant role in pram. Our pram meets all requirements according to EN1888 and is CE-certied.

• Your child‘s safety can only be guaranteed if this product is used according to these instructions. Therefore, please take time to read through this manual carefully.

• This product is suitable for children from approximately 6 months.

• Read this instruction manual carefully. Study the illustrations in this manual closely before and during installation.

• To prevent your child from falling out of the pram always check to make sure the front bar is “clicked”. Also make sure your child is always strapped securely with the harness belt.

• Always secure your child with the harness belt.

• We strongly advise against using a second-hand product, as you can never be sure of its history.

• In order to prevent damage to the fabrics, do not remove the logos or airbag sticker. 1 Unsap leg from auto clamp on handle. Push front wheels down and pull hadles up until stroller frame is in an upright position. 2 Push down rear lock brace until it snaps into place.BabyGO

3. Engage the front wheels. Make sure thet ‚ re fully hook.

4. Push reclining plastic buttons at both lower sides of frame to sli-

de back or for ward into desired seating postion.

5. Press to open the safety harness . Belts are adjustable.

6. To step down the brake lev to lock the jogger . To unlock: lift up

8. Lift up the base lock 10 release, and step down at the second

safety locking bar to close the stroller.