Relax Perla BN209 - Baby swing Baninni - Free user manual and instructions

Product type	Baby swing
Brand	Baninni
Model	Relax Perla BN209
Recommended age	Up to 6 months
Maximum supported weight	9 kg
Backrest reclining positions	3 adjustable positions
Mode of use	Manual rocking or fixed position
Included accessories	Toy tray (installation with screwdriver)
Safety belt	Yes, must be buckled each use
Fabric care	Machine wash at max 40°C
Frame and plastic parts care	Clean cloth, warm water and mild soap
Replacement parts	Use only manufacturer-approved parts
Safety	Do not leave unattended, do not use on elevated surfaces, do not use near heat sources or water
Reparability	Contact the supplier if problems arise

Frequently Asked Questions - Relax Perla BN209 Baninni

What is the maximum recommended age for using the Relax Perla BN209 swing?

The swing is designed for children up to 6 months and a maximum weight of 9 kg.

How to adjust the backrest recline?

Press the buttons on both sides of the backrest, then place the backrest in the desired position. The backrest can be adjusted to 3 positions.

How to switch from rocking mode to fixed mode?

For rocking mode, raise the frame feet. For fixed mode, move the legs onto the rear tube.

How to install the toy tray?

Attach the toy tray to the bar using a screwdriver (not included).

Can I leave my baby unattended in the swing?

No, never leave the child unattended. Always use the safety belt.

Is the swing suitable for extended sleep?

No, this lounge chair is not intended for long periods of use and sleep.

How to care for the swing fabric?

The fabric can be machine washed at a maximum temperature of 40°C.

How to clean the frame and plastic parts?

Clean with a clean cloth, warm water and mild soap. Do not use abrasive products.

Can I use accessories not provided with the swing?

No, only use accessories or replacement parts approved by the manufacturer.

What to do if there is a problem with the swing?

Contact the supplier where you purchased the product. The local supplier is best placed to immediately meet all requirements.

USER MANUAL Relax Perla BN209 Baninni

"THE FIRST STEPS TO KNOWLEDGE"

"THE FIRST STEPS TO KNOWLEDGE"

WIPSTOELJE PERLA BN209 MONTAGE RICHTLIJEN

NL

"THE FIRST STEPS TO KNOWLEDGE"

BABY RELAX PERLA BN209 ASSEMBLY GUIDELINES

GB

For safety reasons please follow the instructions below

Should you have any questions about your Baby relax, or experience any difficulties, please contact the retailer from which you purchased the product. Your local retailer is in the best position to address any requirements.

DRAWINGS IN THIS MANUAL ARE FOR ILLUSTRATION PURPOSES ONLY - ACTUAL PRODUCT MAY VARY MANUFACTURER RESERVES THE RIGHT TO CHANGE ANY SPECIFICATION OR FEATURES WITHOUT PRIOR NOTICE.

1. Main Part List

2a

3a

Mark: The rocker is ready to use. By simultaneously pressing the button of the adjust mechanism of the backrest. There are 3 positions of backrest.

3b

Mark: When the plastic heels in the bottom are folded. The rocker is ready to wave. Stop rocker waving by putting the three heels at the end of the main tube.

WARNING

• never leave your child unattended in the rocker

• stop using the rocker as soon as the child can sit up alone without support. It is suitable for children aged up to 6 months and weight max 9KGS

• warning: It is dangerous to put this rocker on an elevated surface

• never attempt to lift the rocker by using the toy bar.

• assemble and adjust the rocker with care. Before using, check the condition of the two regulating mechanism adjusting the position of the backrest

• on adjusting the position of the backrest you must be sure that both mechanism are well locked in the choses position

• don't leave the rocker near a switched on fan, heat sources, sharp objects and water containers

• always use the safety belt

• this rocker has not been designed for longer sleeping times. It is neither a substitute for a cornor a bed. If your child needs to sleep, he or she should be laid in a suitable cot or bed

• only use accessories and appropriate spare parts which have been approved by the manufacturer

• Care and maintenance

• the cover of the rocker can be washed in washing machine and temperature shouldn't be higher than 40 degrees

• the metal and plastic parts can be cleaned with lukewarm water and mild soap detergent.

"THE FIRST STEPS TO KNOWLEDGE"

TRANSAT PERLA BN209 INSTRUCTIONS DE MONTAGE

FR

"THE FIRST STEPS TO KNOWLEDGE"

BABY WIPPE PERLA BN209

MONTAGEANLEITUNG

DE

"THE FIRST STEPS TO KNOWLEDGE"

Voortstraat 12

2490 Balen - Belgium

www.baninni.com

Find us on Facebook & Instagram.am