90.354 - Bottle warmer Beper - Free user manual and instructions

Frequently Asked Questions - 90.354 Beper

USER MANUAL 90.354 Beper

For further information and/or for instructions for use in other languages, please visit: www.beper.com

IMPORTANT NORME DI SICUREZZA

IMPORTANT SAFETY INSTRUCTIONS

Use this appliance only for the purposes shown in this instruction manual. Any other usages should be considered dangerous. The product should only be connected; please check always that the voltage corresponds to the one shown on the unit rating label. Always unplug the product after every usage, before cleaning it, or in case it does not work properly. Never use the product in case the power cable has been damaged and/or the product has been damaged or it does not work properly. In case of damages to the correct product functioning always address to specialised centre. Never try to repair the product by yourself; otherwise the warranty will be not valid anymore.

Attention: the product is not a toy and should be kept out of the children's reach, place it always out of their reach and never leave it unattended. Always place and store the product away from heating sources, sunlight, dampness and sharp objects.

PRECAUTIONS

To avoid risk of electric shock, do not immerse the appliance, its power cord or any of its parts in water or any other liquid.

If the appliance or the power cord display visible signs of damage, immediately unplug the appliance from the electrical outlet and do not use it. Do not use the appliance outdoors.

Do not place it on excessively hot surfaces. Do not handle or move the product when it is in use or when it contains very hot water.

Remove the power cord when the product is not in use and before cleaning it.

Make sure that the bottle or food jar to be placed in the appliance is at a safe temperature before proceeding to heat it.

This appliance is intended exclusively for domestic use.

Do not immerse the appliance in water

The bottle warmer is for heating foods but not for cooking them. The recommended temperature is 37^ .

Attention: the product is not a toy and should be kept out of the children's reach, place it always out of their reach and never leave it unattended.

Unplug always the unit, before getting out of your car. Never leave the unit unattended in case it is connected to the plug.

USING THE APPLIANCE

1- First clean the appliance and its part/accessories, as indicated in the paragraph below.
2- Place the appliance on a flat, stable surface, out of children's reach, where there is no risk of it being accidentally bumped while in use.
3- Remove the measuring cup from its holder and fill it with water for heating the bottle or food jar. See the indications in the table below for the correct quantity of water to put in the heater chamber: Note: the bottles and food jars are heated by steam. The dimensions and material of the bottle or food jar (glass or plastic) and the type and quantity of liquid or food to be heated can have an effect on the heating time. If the bottle or food jar is not hot enough after the heating cycle, add more water the following time. If, however, the bottles and food jars are too hot, reduce the quantity of water.
4- Now place the bottle in the large basket and lower this into the chamber. For food jars, use the other basket (which is stored inside the larger basket).
Note: give the food to your baby soon after heating, without allowing too much time to pass. This will help avoid the spread of germs.
5- Plug the appliance into the power outlet.
6- Follow the instructions below according to the function would like to use:

Milk warmer

Turn the thermostat to indicator light will turn on while heating, and automatically while constant temperature reach to 40 - 47^

Heating baby food

Turn the thermostat to indicator light will turn on while heating, and automatically while constant temperature reach to 65 - 85^

Sterilize

Turn the thermostat to indicator light will turn on while heating, and automatically while constant temperature reach to 100^ .

100^ C Function

Turn the thermostat to 100^ . indicator light will turn on while heating, and automatically while constant temperature reach to 100^ .

Warning: the steam is very hot. Do not put your hands in the chamber when the appliance is in use. 7- When heating is complete, remove the bottle or food jar from the chamber and disconnect the appliance from the electrical outlet.

For bottles: pick up the bottle and shake it. Pour a small quantity of liquid on the back of your hand to check the temperature

For food jars: mix the contents and check the temperature of the food.

CARUSE

Never use the bottle warmer while the vehicle is in motion.

Leave your engine running when using the bottle warmer to avoid draining your battery.

The car adapter cord is specially designed for this bottle warmer: never use it with other appliances.

Regularly check the cigarette lighter socket in your car. Clean it if necessary.

If you have just used your car's cigarette lighter. Allow it to cool for 5 minutes in the open position before plugging in with the bottle warmer.

Instructions for use in car:

Stop the car and keep the engine running.

Place the bottle warmer on the flat and stable surface.

Connect the car adaptor cord into the DC socket of the bottle warmer.

Put the car adaptor cup with water, following the instructions shown above, then pour the water into warming chamber. Repeat above steps from Instruction for use at home section.

Attention: in car use, the AC socket has no use. Once you plugged in the car adapter cord, the bottle warmer has its power source supplied (DC cord).

CLEANING DIRECTIONS

Before cleaning the appliance, always unplug the power cord from the electrical outlet and make sure the appliance has cooled down.

Use a damp cloth (or sponge) and water or detergent (non-abrasive) to clean the appliance and/or its accessories and remove any milk residues. Use water. Never immerse the appliance in water or any other liquid.

Do not use abrasive, corrosive or solvent detergents to clean the appliance. This could damage the appliance and its surfaces.

To maintain efficient functioning of the appliance, it is advisable to remove any lime scale deposits that may build up as follows: prepare a solution of 100ml vinegar and 200ml cold water and pour this into the chamber. Leave the solution inside the chamber for about 30 minutes, or long enough to eliminate the lime scale deposits. Then empty the tank and dry thoroughly with a non-abrasive, moist cloth.

IMPORTANT NOTICE

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance. If the power cord is damaged it must be replaced by the builder or by its technical service or, in any case, by a person holding similar qualification in order to avoid whatsoever hazard.

TECHNICAL SPECIFICATIONS

Home use

Power: 100W

Voltage: 220/240V - 50/60Hz

Car use

Power: 60W

Voltage: 12V DC

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.

For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance's efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

Guarantee conditions

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

• The appliance has been used properly and for the purpose for which it has been intended.
• Repairs are professionally carried out by qualified persons who are appointed by the supplier.
• The purchase receipt shall be presented.
• The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements...) is excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, damage during transport and any other damage not attributable the supplier.

For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.

Technical assistance

Even after the guarantee period we will always pay attention to repairs for defected appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address:

CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR AFTER SALES DEPARTMENT

BEPER. E-MAIL [e-mail]

WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.

IMPORTANT NORMES DE SECURITE

Assistance technique