40.986 - Lawn mower Beper - Free user manual and instructions
Find the device manual for free 40.986 Beper in PDF.
Frequently Asked Questions - 40.986 Beper
User questions about 40.986 Beper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Lawn mower in PDF format for free! Find your manual 40.986 - Beper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 40.986 by Beper.
USER MANUAL 40.986 Beper
READ THE FOLLOWING INSTRUCTIONS CAREFULLY, SINCE THEY GIVE YOU USE FUL SAFETY INFORMATION ABOUT INSTALLATION, USE AND MAINTENANCE AND HELP YOU AVOID MISHAPS AND POSSIBLE ACCIDENTS.
Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label. The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use. This appliance is for HOUSEHOLD USE ONLY.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.
Do not hold the appliance with wet hands or feet.
Never use any accessories but those provided for by Beper. The use of accessory attachments not recommended by the appliance manufacturer may cause hazard or injury.
Do not use the appliance near the bath, the shower, the wash-basin or anywhere water can turn out to be a source of danger.
Do not pull the mains cable or the appliance itself when disconnecting the plug from the socket.
Do not let cord hang over edge of table, or touch hot surface.
Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail. Do not use outdoors. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply cable after disconnecting the plug from the socket. Also make any dangerous parts unserviceable, especially for children who could play whit the appliance.
Let other potential users read these instructions.
Keep these instructions
USE ADVICE
Make sure that the mains voltage corresponds to the data specified on the label of the battery charger.
This hair clipper has been manufactured only for household use and cannot be used by professionals.
This hair clipper has been manufactured only for cutting natural hair.
Keep out of the reach of children.
Do not try to open the hair clipper or any parts of it.
Keep the hair clipper away from heated surfaces. Do not use this appliance while bathing or in a shower.
Do not use the hair clipper with wet hands.
Do not immerge the motor, cord supply or plug into water or other liquids.
Do not charge the hair clipper directly under sun rays or near to a heater source. Do not charge the battery more than 20 hours.
When the hair clipper is working, do not touch moving or hot parts, do not try to remove or insert accessories.
A regularly cleaning and care is the only way to keep the hair clipper intact.
Do not use the hair clipper if damaged ; contact the manufacturer or specialised centre.
The hair clipper works with a rechargeable battery; do not throw the used one into hou sehold waste but bring it to the normal unsorted municipal waste stream.
DESCRIPTION
1 - Ceramic hair clipper blades
2-Switch on/off
3 - Charge indicator
4 - Plug for charge
5-Locking pin head
6 - Trimming position switch
7-Adjustable heads
8-Battery charger
9 - Brush
10-Oil
HOW TO CHARGE/RECHARGE BATTERY OF HAIR CLIPPER
The optimal temperature to charge the hair clipper is between 5^ and 35^ . Do not expo se the hair clipper to high temperatures for long periods.
Before charge, make sure the hair clipper is off, the switch on must clearly show OFF.
Insert the battery charger directly into the hair clipper or into the base.
The battery start to charge and the charge indicator lights.
During the first charge, let the hair clipper plugged for 10-14 hours consecutive. The next charge will take 7/8 hours.
The hair clipper got a 90 minutes autonomy after complete charge.
For optimal duration, it is recommended to charge the battery when it is completely low.
INSTRUCTION FOR USE NOTICE
For the first use of the cut clipper, you have to cut a little bit hair.
Before starting hair cut :
- Make sure the hair clipper is clean, without hair or dirt. If necessary distribute a drop of oil between the blades of the hair clipper and check that it is running smoothly;
- Place a towel around the neck and shoulders of the person having the haircut;
- Seat the person so their head is approximately at your eye level. This allows ease of visibility while cutting and a relaxed control of the unit;
- Before cutting always first comb the hair so it is tangle free and as it is naturally worn;
- Cut the hair in a relaxed and slow manner. Use short stroked only to work gradually over the entire head :
- Always take off a little hair at a time, you can always trim off additional hair later;
- As you work, comb the hair frequently back into the style to which you are cutting;
When cutting with this hair clipper it is better to leave the hair dry, not wet.
USE
Put the switch on to cut hair.
While making slip the adjustable head on the hair clipper it is possible to regulate the cut length. Pull up to remove it.
Different positions are available for various cut length :
0.8 - 1.1 - 1.4 - 1.7 - 2 mm (without adjustable head) and 3 - 6 - 9 - 12 mm.
Make slip the adjustable head forward to obtain a longer cut, backwards for shortest cut. After cutting, always switch off the hair clipper.
CLEANING
Always unplug the appliance from the socket.
Remove hair after every use, with the provided brush and distribute a drop of oil on the blades. Use only mineral oil, as the provided oil; you can also use oil used for sewing machine..
Clean the external part with a soft cloth lightly wet.
TECHNICAL DATA
Non-stop 90 minutes function
8 hours charge
Power supply: DC 2.4V, 12W
Charger power: 230V 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol

on the product reminds you of your obligation,
that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance's efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
Guarantee conditions
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- Repairs are professionally carried out by qualified persons who are appointed by the supplier.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements...) is excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
Technical assistance
Even after the guarantee period we will always pay attention to repairs for defected appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address:
CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR AFTER SALES DEPARTMENT
BEPER. E-MAIL assistenza@beper.com
WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.
PRECAUTIONS GENERALES
LIRE ATTENTIVEMENT LES INSTRUCTIONS SUIVANTES AVANT LA PREMIÈRE UTILISATION DE L'APPAREIL.
EasyManual