Limited RWay SP LTD - Car seat Nania - Free user manual and instructions

Brand	Nania
Model	Limited RWay SP LTD
Product type	Booster seat with backrest group 2-3
Weight group	15 to 36 kg (approximately 3 to 12 years)
Installation	Forward-facing vehicle seat, 3-point safety belt
Headrest	Height adjustable
Diagonal belt guide	Integrated into the headrest
Armrests	Liftable for easy access
Seat recline	Yes (depending on model)
Cover	Removable cover, hand wash at 30°C with soapy water
Maintenance	Do not use bleach, do not iron, do not machine wash, do not tumble dry
Safety	Approved according to UN/ECE Regulation R44/04, Universal category
Optional accessory	Comfort sleeve for diagonal belt
Manual storage	Pocket or between shell and cover depending on model
Number of pages in the manual	28 pages

Frequently Asked Questions - Limited RWay SP LTD Nania

How to install the Nania Limited RWay SP LTD car seat?

Place the car seat against the rear seat of the vehicle, facing forward. Raise the headrest fully. Route the diagonal part of the belt through the headrest guide. Seat the child, lower the headrest to their size, buckle the belt passing the lap part under both armrests and the diagonal part under the opposite armrest. Tighten the belt. Check that the belt is not twisted and does not touch the child's neck.

What is the weight group of this seat?

This seat is a booster of group 2-3, suitable for children from 15 to 36 kg (approximately 3 to 12 years).

Can I install this seat in the front of the vehicle?

It is recommended to use the rear seats. However, if traffic regulations allow, installation in the front is possible, but only on a forward-facing seat equipped with a 3-point belt.

How to adjust the headrest?

Raise the adjustable headrest fully to install the child, then lower it to adjust to the child's size. The headrest should envelop the child's head and guide the diagonal belt over the shoulder without riding up on the neck.

How to clean the seat cover?

The cover is removable. For light stains, clean with a damp sponge and soapy water. You can hand wash at 30°C in soapy water. Do not use bleach, do not iron, do not machine wash, do not tumble dry.

What to do in case of an accident?

After a violent accident, the device must be replaced as it may have been weakened. Consult the manufacturer.

Is the seat compatible with all vehicles?

This seat is approved as Universal according to regulation R44/04, compatible with most vehicles equipped with 3-point safety belts. Check the vehicle manual for seats designated as suitable for universal devices. If in doubt, contact the manufacturer.

How to use the comfort sleeve?

Open the sleeve, place it around the vehicle's diagonal belt, then close it with the Velcro straps. Position it at the child's shoulder to prevent direct contact of the belt with the neck.

Can I machine wash the cover?

No, the cover must not be machine washed. Hand wash at 30°C in soapy water.

How to store the manual?

Depending on the model, you can store the manual in the dedicated pocket or by sliding it between the shell and the cover of the seat.

USER MANUAL Limited RWay SP LTD Nania

from 15 to 36kg (from approximately 3 to 12 years)

DE

We would like to congratulate you on your purchase of a group 2-3 car seat. If you would like to obtain any help regarding this product, you can contact our customer service (contact details on the back of this guide).

GB

SAFETY INSTRUCTIONS

WARNING: Please read these instructions carefully before using the seat and keep this guide in a safe place for future reference. If you do not comply with these instructions, the safety of your child could be compromised. Only install your group 2-3 booster seat on a forward facing seat that has a 3-point seat belt (1).

• The hard items and the items in plastic of the child restraint system must be located and installed so that when used normally, they do not get trapped under a movable seat or in the vehicle door.
• Make sure the straps to attach the restraint system to the vehicle are kept tight and adjust the straps that hold in the child. The straps must not be twisted.
• Make sure the sub-abdominal straps are run as low as possible, to keep the pelvis in good position.
• Replace the restraint system if it has been subjected to violent shocks in an accident.
• It is dangerous to change or add elements to the restraint system in any way without the authorisation of the competent authority, or not to carefully follow the instructions on installation provided by the manufacturer of the child restraint system.
• Keep the seat out of direct sunlight so that the child does not get burned.
• Do not leave the child unattended in a child restraint system.
• Make sure that luggage and other items that might harm the child in the seat in the event of a shock are correctly stowed away.
• Do not use the child restraint system without the cover.
• Do not replace the seat cover with one that has not been recommended by the manufacturer, because it plays a direct role ensuring that the restraint system works effectively.
• If you have a doubt concerning the installation and correct usage of your seat, please contact the manufacturer of the child restraint system.
• Install your child restraint system on seats categorised as "Universal" in your car manual.
• Do not use weight-bearing contact points other than those described in the instructions and indicated on the restraint system.
• Always use the back seat if possible even if the Highway Code stipulates that using the front seat is allowed.
  Always ensure that the seat belt has been fastened.
• Do not clothe the child in garments that are too bulky in winter.
• Do not use the child restraint system on side facing or rear facing vehicle seats.

Your Group 2-3 booster seat (2)

1. Height adjustable head support
2. Diagonal belt guide (x2)
3. Back
4. Seat
5. Instruction manual pouch (depending on the model)

GB

In-car installation

Gr. 2-3, from 15 to 36 kg (from approximately 3 to 12 years)

Your car seat is fitted with an adjustable headrest that has been designed to support your child throughout growth by providing maximum lateral protection.

Raise the adjustable headrest to its highest position (3). Place the car seat against the back seat of the vehicle (4) and feed the diagonal strap of the belt through the headrest guide (5) (6). Sit your child in the car seat. The folding armrests make it easier to install and access the car seat. Make sure that the child's back is fully in contact with the back of the car seat. Pull and fasten the vehicle seat belt. Pass the diagonal strap of the belt under the arm rest opposite the belt guide used. The waist strap of the belt passes under both armrests (7). Lower the adjustable headrest and adjust it to the height of your child (8). It should be positioned so that it surrounds your child's head, providing maximum lateral protection, whilst guiding the diagonal belt over the child's shoulder so that it doesn't extend onto the child's neck (9) (10). Tighten the vehicle seat belt (11).

Make sure that the seat belt is properly tightened, that it is not twisted and that it is not positioned at the level of your child's neck.

To remove your child from the car seat, simply unbuckle the seat belt and place it at the side of the car seat. The belt will remain suspended from the headrest belt guide (12).

CAUTION: Before each journey, check that the armrests are lowered. Secure your car seat with the vehicle seat belt at all times, even when your child is not in the car seat. An unsecured car seat can cause injuries in the event of a collision.

Diagonal belt comfort pad (optional according to model)

Your car seat may come with a comfort pad which can be placed on the diagonal car seat belt when the seat is used for groups 2 and 3. The comfort pad prevents your child's neck from being in direct contact with the car seat belt.

Open the comfort pad (13). Place it around the diagonal car seat belt and close it using the velcro bands (14). Position the comfort pad so that it is level with your child's shoulder (15).

Reclining your child seat (depending on the model)

(16)

GB

Storage of the instruction manual

Store this instruction manual, depending on the model of your vehicle, either in the pouch provided, or by slipping it into between the shell and the cover of the seat (17).

Maintenance advice

All the material parts can be removed. Slight stains can be removed using a damp sponge soaked in soapy water or it can be washed by hand at 30^ in soapy water. Do not use bleach, do not iron, do not machine wash, and do not tumble dry.

WARNING

• This car seat is a "Universal" child restraint system. It has been approved in accordance with regulation N°44/04, and is suitable for general use in vehicles and is compatible with the majority (some exceptions) of vehicle seats.
• It is more likely that the seat is perfectly compatible if the vehicle manufacturer states that its vehicles are suitable for taking "Universal" child restraint systems.
• This restraint system is classified as "Universal" in accordance with the strictest approval criteria, whereas earlier models do not correspond to these new provisions.
• It can only be adapted to vehicles with 3-point safety belts that are either fixed or have a roller mechanism and that have been approved compliant with the UN/ECE No 16 or other equivalent standards.
• If in doubt, contact the manufacturer or retailer of the restraint system.