Genie 255CD - Shredder

255CD - Shredder Genie - Free user manual and instructions

Find the device manual for free 255CD Genie in PDF.

📄 21 pages English EN 💬 AI Question ⚙️ Specs
Notice Genie 255CD - page 6
View the manual : Français FR Deutsch DE English EN Italiano IT Português PT
Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : Genie

Model : 255CD

Category : Shredder

SKIP

Frequently Asked Questions - 255CD Genie

Download the instructions for your Shredder in PDF format for free! Find your manual 255CD - Genie and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 255CD by Genie.

USER MANUAL 255CD Genie

Thank you for buying this high-quality product. Please carefully read through these operating instructions before using the device for the first time. In particular, please comply with the safety notices. Our service information is located at the bottom of these instructions. Safety notices:

1. Always be sure to keep all loose objects such as e.g. clothing, ties, jewellery, hair and all other small objects away from the feed slot in order to avoid injury.

2. Set the switch to OFF in the event the document shredder is not be used for a longer period of time.

3. Remove all paper clips and staples before inserting the paper. Though the device is capable of shredding staples, this is not recommended.

4. Always be sure to keep your fingers and hands away from the feed slot in order to avoid serious injury.

5. The continuous shredding operation should not last longer than 2 minutes. Should it be necessary to operate the device continually, it is recommended that the shredding operation be limited to 2 minutes and that the unit's motor is allowed to cool down between operations.

6. The device should be setup as close as possible to an easily accessible wall socket.

7. The document shredder must always be deactivated and disconnected from the electrical line prior to moving, transporting and cleaning the device and prior to emptying the waste basket.

8. Empty the waste basket frequently. Otherwise the shredder may jam.

9. Please do not leave the document shredder unattended e.g. in the event children or pets are nearby.

10. Never open the casing, in the event of problems, please consult the vendor location, where you purchased this device or our hotline.

11. The device may not be operated with a damaged power cord.

12. For indoor use only.- 7 -

13. This machine is no toy. Keep it away from children and pets.

14. Creditcards, CDs/DVDs and paper may not be destroyed at the same time.

1. Please first insert the collecting tray (for CDs/DVDs) in the waste basket.

2. Securely mount the document shredder on a waste basket. In the process, ensure that you

do not catch your fingers between the top edge of the waste basket and the shredder. Important note: The document shredder can only be set on one side of the basket. Ensure that the document shredder is properly fitted onto the basket.

3. Connect the mains plug to a standard 220-240 volt AC socket.

Starting the document shredder: The sliding switch is located on the top side of the unit and can be set to three (3) positions.

1. AUTO position: the shredding operation starts automatically as soon as the paper to be

shredded is inserted in the feed slot. After the shredding operation is complete, the device will automatically deactivate.

2. REV features the following two functions:

a) Rectifying a paper jam. In this case, the direction of the shredding operation is reversed before the work cycle ends in order to free the shredding blades. Should you determine that too much paper has been inserted and the shredding operation slows noticeably, immediately set the switch to this position, also in the event paper is accidentally inserted. b) Shredding CDs/DVDs and credit cards: Insert an individual CD/DVD or credit card in the designated feed slot on the shredder.

3. In order to empty the waste basket or in the event the device is not used for a prolonged period

of time, the switch should be set to OFF and the device should be disconnected from the electrical line. This device is designed solely for private use in enclosed quarters and for brief operation not exceeding 2 minutes. Do not use the document shredder for commercial applications nor outdoors. Furthermore, the document shredder features a “Clear” switch. Please press this if the shredding operation ends before the paper has been completely shredded. With the help of the clear switch, the paper is then completely ejected into the waste basket.- 8 - Capacity of the document shredder: The 255CD shreds up to 7 sheets of paper (DIN A4, 70g). The paper width may comprise up to 22 cm. When shredding small paper sizes such as letters or credit card receipts, please insert them into the middle of the shredding slot. Please ensure that never more than the above-mentioned maximum quantity is inserted in the shredder. Otherwise the device may sustain damage. Separate shredder for CD’s and credit cards: This document shredder is equipped with a separate shredder for CDs/DVDs and credit cards. CDs/DVDs are shredded into 4 pieces. Given that such materials always present the risk of splinters, please keep your face at an acceptable distance when inserting CDs/DVDs. The shredded material is then collected in a separate tray thereby facilitating its environmentally-friendly disposal. Protection against paper jams and overloading: The 255CD is equipped with a motor overload guard. The normal work cycle for the shredding operation takes 2 minutes with a maximum load, after which a prolonged break must be taken. Under the following conditions, the current feed to the unit’s motor is interrupted:

1. Continual operation of the document shredder with maximum capacity for a prolonged period of

time, e.g. longer than 2 minutes without interruption.

2. Overrunning the shredding capacity e.g. adding more than 7 sheets of paper (70g) in one

operation or in the event the paper is not inserted length-wise into the feed slot. Under the above-mentioned conditions, the automatic overload guard of the motor is triggered, whereupon the current feed to the device is interrupted. In such a case, please take the following steps:

1. Disconnect the mains plug from the AC socket and wait at least 15 minutes until the overload

guard has reset. Now tear off excess paper from the top of the shredder or remove it.

2. Reconnect the mains plug to the AC socket and set the switch to the REV position. Pull the

remaining paper away from the shredding blades. Afterwards, set the switch back to the AUTO position. If necessary, repeat this step.

3. With the switch in the AUTO position and the open feed slot, you may now continue the normal

Thank you very much for purchasing this GENIE product. Please note the following advice whenever this machine does not function faultlessly, contrary to expectations. The guarantee period amounts to 24 months from the date of purchase, provided that the machine has been used appropriately. Please keep the proof-of-purchase voucher and original packaging in a safe place. The warranty is only valid for defects in materials or fabrication. However, it is invalid for damage that has occurred to breakable parts, e.g., on the casing. Machines that have been damaged by inappropriate use externally, are excluded from being exchanged. A guarantee will expire whenever any repairs have been carried out without the express consent of our customer service department. Repairs under the guarantee can only be made when the proof-of-purchase voucher is enclosed with the defective machine – please notify us about the return by telephone! Only adequately pre-paid returns bearing the appropriate return number can be accepted. Please give your name, address, post code, town and telephone number with the dialing code. Please state the reason for your complaint too. We regret any inconvenience caused! Our service hot line Tel. (++49) (0) 6122-7279891 ● Fax (++49) (0) 6122-705952 ●E-mail: hotline@genie-online.de Please send all returns adequately pre-paid to the following address after notifying us about them beforehand: GENIE GmbH & Co. KG, -Service- , Berta-Cramer-Ring 22, D-65205 Wiesbaden. Deutschland/Gemany

Disposal: Guideline 2012/19/EC concerning the handling, collection, recycling and disposal of electrical and electronic equipment and their components (‘waste electrical and electronic equipment’, known as WEEE). The crossed symbol on a rubbish container indicates that the machine or device is not allowed to be disposed of but it must be handed over to a suitably equipped collection centre for proper recycling or disposal. Directives: We declare that this device has been manufactured in accordance with the applicable rules and regulations.- 10 - FR Destructeur de documents GENIE 255CD avec bloc de coupe séparé pour CD / DVD et cartes bancaires