50.943 - Iron Beper - Free user manual and instructions

Frequently Asked Questions - 50.943 Beper

USER MANUAL 50.943 Beper

For further information and/or for instructions for use in other languages, please visit: www.beper.com

AVVERTENZE GENERALI

LEGGERE QUESTE ISTRUZIONI PRIMA DI USARE L'APPARECCHIO.

READ THE FOLLOWING INSTRUCTIONS CAREFULLY, SINCE THEY GIVE YOU USEFUL SAFETY INFORMATION ABOUT INSTALLATION, USE AND MAINTENANCE AND HELP YOU AVOID MISHAPS AND POSSIBLE ACCIDENTS.

Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.

The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.

The appliance can be damaged if the voltage is not correct.

If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.

Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.

Do not use the appliance if the cable or the plug shows any damages.

Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.

This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use. This appliance is for HOUSEHOLD USE ONLY.

To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.

Do not use the appliance near explosives, highly flammable materials, gases or burning flames.

Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.

Do not hold the appliance with wet hands or feet.

Never use any accessories but those provided for by Beper. The use of accessory attachments not recommended by the appliance manufacturer may cause hazard or injury.

Do not use the appliance near the bath, the shower, the wash-basin or anywhere water can turn out to be a source of danger.

Do not pull the mains cable or the appliance itself when disconnecting the plug from the socket.

Do not let cord hang over edge of table, or touch hot surface.

Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail. Do not use outdoors.

Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply cable after disconnecting the plug from the socket. Also make any dangerous parts unserviceable, especially for children who could play whit the appliance.

Let other potential users read these instructions.

Keep these instructions.

USE ADVICE

Make sure that the mains voltage corresponds to the data specified on the label.

Do not used the iron if the cord supply or plug are damaged or in case of electric shock make it repaired by an authorized assistance centre.

When using the iron for the first time remove the protection on the soleplate.

When used for the first time the soleplate may diffuse a light smoke caused by evaporation of protective oil used in factory; that is not dangerous and smoke will disappear after some use.

Never pull the supply cord to unplug the appliance.

Do not roll up the electric cord around the iron.

Keep away to a reasonable distance the supply cord from the iron plate, especially when it is hot.

When making a break or if not used, put the iron on the iron rest in vertical position.

The plate of the iron becomes very hot, take care not to burn yourself.

Always choose the right temperature according the cloth which has to be ironed.

Do not use the stream station as a heater. Do not iron the wet clothes, let them dry before ironing.

Do not pass the iron on buttons or zipper in order to not to damage the plate.

Before cleaning, unplug the supply cord.

If you no longer use this appliance, please keep away from children.

INSTRUCTION FOR USE

When used for the first time a little smoke may appear but will stop after a few minutes.

Before using the iron remove adhesive or protective film from the soleplate using if necessary a wet cloth.

Do not scratch the soleplate with metallic object, as well as zip, buttons, etc.

Before plugging the iron on the socket, check that the main voltage correspond to the one used for the iron.

ATTENTION: THE SOLEPLATE IS VERY HOT, DO NOT TOUCH DURING USE!

KEEP AWAY FROM CHILDREN.

IRONING

1 - Set the temperatureon "MIN".
2 - Place the iron in vertical position, the soleplate does not be in contact with objects or other.
3 - Plug the appliance to the socket.
4 - Set the desired temperature, using symbols on the thermostat.
5-Start ironing.
6 - After ironing, put the iron in vertical position and unplug the appliance.

The iron must always in movement on the fabric when used.

TEMPERATURE SETTING

Always check the washing and ironing labels of clothes. If necessary, see instructions below:

SYMBOL FA	BRIC
	Do not iron
	Synthetic, Nylon, Acrylic, Rayon
	Wool, Silk
	Cotton, Flax

The number of points on the thermostat indicate the temperature from the lower one () to the higher one ( ) . The table is valid for fabrics and not for brilliant surfaces, with relief printings or folds which must be ironed with low temperature.

Before using the iron, always make sure that the temperature of iron is adapted to the type of fabric: wool with wool, cotton with cotton, etc.

The iron heats quickly and cools slowly; thus always start with clothing which requires a low temperature (like synthetic fabrics) and always progress with the highest temperatures..

When the cloth is made of several fabrics, set the temperature for the most delicate fabric.

If you do not know the type of fabric we recommend to iron the internal parts of clothing, from lowest temperature, and then finding the temperature more adapted. If clothing becomes "brilliant", stop immediately in order to not damage it. Then start to iron it on the back.

N.B. Pay attention to the symbol

: that means that the fabric must not be ironed.

DRY IRONING

Set the steam indicator on in order to not to use steam function. Set the soleplate temperature by using the thermostat.

The light indicator illuminates and switch off when the soleplate is at good temperature.

Start ironing after iron reached desired temperature.

Please note that the soleplate reached lower temperatures when used without steam.

CLEANING

Unplug the appliance from the socket.

To remove dirt on the soleplate, use a wet cloth or with a little quantity of non abrasive detergent when the soleplate is still hot.

For hard dirt, use special detergent.

Always dry the soleplate after cleaning.

Clean the whole iron with a wet cloth without detergent.

Do not use metallic sponge or abrasive detergent.

STORAGE

Unplug the appliance from the socket and let it cool.

QUESTIONS

Problems Causes Solution
The iron does not work 1. the tempeature indicator is too low2. problems with power supply	1. select higher temperature position2. check the power supply by plugging another appliance to the socket
The light indicator does not light	1. the iron is cooling2. the iron does not heat	1. wait until cooling is over2. see paragraph above
The fabric stick bewteen each other	1. the temperature is to high 1. select lower temperature position and let the iron getting cooler

TECHNICAL DATA

Power: 1000W

Power supply: 220 - 240V 50Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.

The crossed out "wheeled bin" symbol on the product reminds you of your obligation,

that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.

For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance's efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

Guarantee conditions

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

• The appliance has been used properly and for the purpose for which it has been intended.
• Repairs are professionally carried out by qualified persons who are appointed by the supplier.
• The purchase receipt shall be presented.
• The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements...) is excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, damage during transport and any other damage not attributable the supplier.

For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.

Technical assistance

Even after the guarantee period we will always pay attention to repairs for defected appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address:

CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR AFTER SALES DEPARTMENT

BEPER. E-MAIL [e-mail]

WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.

PRECAUTIONS GENERALES

LIRE ATTENTIVEMENT LES INSTRUCTIONS SUIVANTES AVANT LA PREMIÈRE UTILISATION DE L'APPAREIL.

Assistance technique