EB1500 - Heated blanket/cushion Carmen - Free user manual and instructions

Frequently Asked Questions - EB1500 Carmen

USER MANUAL EB1500 Carmen

> Instructions for use

ThankyouforpurchasingtheCarmenelectricunderblanket.Please readtheseinstructionscarefullybeforeusingtheproductandkeep them in a safe place for future reference.

The product

Name:CarmenSingleCottonblanket,CarmenSingleFleeceblanket,
CarmenSingleFleececoverwithfootwarmthenCarmenDouble
Fleece cover with foot warmth
Model:EB0500,EB1000,EB1500 and EB2000
Voltage: 230 - 240V^-50Hz AC

Part of the appliance

• Blanket
• Switch with cord and plug (model EB2000 2x)

For your safety

The instructions include safety guidelines and other information important for the proper functioning of the appliance. Please read the instructions carefully and keep them in a safe place. If the appliance changes hands, besuretogivetheinstructions to the new owner. It is in your own interest to follow all safety guidelines.

> Safety instructions

• AllCarmenheatedblanketshavebeen manufacturedtothe highestEuropeanstandards.Thisproducthasbeencompren-sivelytestedforallknownsafetysituations,soyoucanrelaxin theknowledgegethatitwillprovidewarmth,comfortandpeace of mind.
• Before using this applianceensures that the voltage indicates on the product corresponds with themainsvoltagein your home. If you are in any doubt about your supply, ask your electrical dealer or local electricity company.
• Only specialists are allowed to do reparations. Improperly reparations can cause considerable danger!
• Thereisalwaysriskofinjurywhenusingelectricalappliances improperly!

Personal safety

• Thisapplianceisnotintendedfortheusebypersons(including children)withreducedphysical,sensoryormentalcapabilities, orlackofexperienceandknowledge,unlesstheyhave been givensupervisionorinstructionconcerninguseoftheappliance by a person responsible for their safety.

• Childrenshouldbesupervisedtoensurethattheydonotplay with the appliance.

• Donotusewithahelplessperson,aninfantorapersoninsensitive to heat.
• Youngchildrenshouldbeinstructedonhowtooperatethecontrolssafelyandheatsettingscontrolledbyaparentorguardian.
• Don't use a hot water bottle at the same time as using the blanket.

Product safety

• Ensuretheblanketisusedinthemannerinwhichisintended, as an under blanket.
• Ifusedonanadjustablebed,checktheblanketorcordcannot become trapped or rucked.
• Ensure the product is correctly fitted to the bed, following the instructions in this booklet.
• Donot insert pins or any sharp objects into the blanket (H).
• Donottucktheatedpartofblanketmaterialunderthemattress.
• Do not use if the blanket is wet.
• Avoidpressingcreasesorfoldsintotheblanket.Donotswitch on if the blanket is folded, creased or rucked (I).
• Donotuseanylead,switchcordotherthanthesesupplied with this blanket.
• Do not coil or lay the lead on the blanket.
• If you are unsure about electrical connections please contact a qualified engineer.

Safeguard overheat protection system

• The system will remain dormant indefinitely as long as the blanketisoperating in the normal temperature range. If for any reason the blanket is operated in an abnormal situation or condition which would otherwise have induced rapid temperature rise, highenoughto constitute a hazard, the overheat system should intervene by cutting off the supply current before the temperature reaches the point at which damagemay occur.
• Intheeventoftheoverheatsystemoperating, the blanket will cease to function.
• It is normal for the lead from the blanket to the switch to become warm as this is part of the heater protection circuit extended to the switch.
• The fact that this blanket incorporates the overheat system does not absolve the user from observing these instructions.

Safety instructions for cleaning and maintenance

• Donotdrycleantheblanket, followwashinginstructions on the labelattachedtotheblanket andthedetails thatrelateto your blanket (Cleaning and Maintenance).
• Whenstoringtheblanket,allowittocooldownbeforefolding.
• Donotcreasetheblanketbyplacingitemsontopofitduring storage.

> Use in accordance with purpose

Theapplianceisonlyintendedfor(pre)heatingyourbed.Useonly asanunderblanketanddonotuseabovetheoccupantofthebed.

Noliabilityisacceptedforanydamageresultingfromuseforother purposes,faultyoperationoramateurrepairs.Guaranteeservices are also excluded in such cases.

The appliance is not intended for medical use in hospitals!

>Operating instructions model EB0500

Switch control (A)

1. Heat levels 3 and 4
2. Heat levels 1 and 2
3. Braille markings
4. Off position

How to use switch

1. Ensure the blanket is fitted to the bed correctly.
2. Plugthepowerleadintotheclosestocket,usingan extension lead if needed to ensure that the lead is not stretched.

Preheating the bed

Movetheheat setting on the control switch to heat level 3 or 4, depending on the level of the heat required. Allow approximately 60-90 minutes for the blanket to heat the bed thoroughly, although this timemay vary depending on the room temperature and type of bedding used.

All night use

Movetheheat setting onthecontrol switchtoheatlevel 1 or 2.

• Thesesettingswill providesafeandcomfortableheattosleep on all night.
  These settings can also be used to air the bed.

Warning!

AlwaysensurethattheheatsettingismovedtotheOFFposition when you get up the next day, or after airing the bed.

Braille markings

• Braillemarkingsarelocatedonthebackoftheswitchtohelp identifythedirectionoftheheatlevelinthedark,orifvisually impaired.
• The highestheatlevel'pre-heat'isidentified by3 raised nodules,'midlevel'by2 raised nodules and'lowlevel'(all night)by 1 raised nodule Fitting underblanket.

Fitting instructions

1. Place the blanket directly on the mattress, with the control switch end at the head of the bed (D).
2. Theblanketmustbepositionedtothemattressinthefollowing manner.Placetheblanketdirectlyonthemattressandensure thataspaceof10-15cm(4-6inches)isleftbetweenthebottom edge of the blanket and mattress.
3. Position the blanket on the bedensuring the pillow areais clear.

>Operating instructions model EB1000

Switch control (B)

1. Illuminated heat setting light
2. Heat levels 3 and 4
3. Heat level 1 and 2
4. Braille markings
5. Off position

How to use switch

1. Ensure the blanket is fitted to the bed correctly.
2. Plugthepowerleadintotheclosestsocket,usinganextension lead if needed to ensure that the lead is not stretched.

Preheating the bed

Movetheheat setting on the controlswitch to heat level 3 or 4, depending on the level of the heat required. Allow approximately 60-90 minutes for the blanket to heat the bed thoroughly, although this time may vary depending on the room temperature and type of bedding used.

All night use

Movetheheat setting onthecontrol switchto heatlevel1 or 2.

• Thesesettingswill providesafeandcomfortableheattosleep on all night.
  These settings can also be used to air the bed.

Warning!

AlwaysensurethattheheatsettingismovedtotheOFFposition when you get up the next day, or after airing the bed.

Braille markings

• Braillemarkingsarelocatedonthebackoftheswitchtohelp identifythedirectionoftheheatlevelinthedark,orifvisually impaired.
• The highestheatlevel'pre-heat'isidentified by3 raised nodules,'midlevel'by2 raised nodules and'lowlevel'(all night)by 1 raised nodule Fitting underblanket.

Fitting instructions

1. Place the blanket directly on the mattress, with the control switch end at the head of the bed.
2. Theblanketmustbepositionedtothemattressinthefollowing manner.Placetheblanketdirectlyonthemattressandensure thataspaceof10-15cm(4-6inches)isleftbetweenthebottom edgeoftheblanketandmattress.Positiontheblanketonthe bed ensuring the pillow area is clear.(G).

Each blanket is fitted with 3 tie tapes.
- Donot stretch the tape too tightly. Allow some 'give' to avoid edgedistortion. Ensure knots aren't tied too tightly so that they can be undone easily.

1. Pass the first tape (1) under the corner of the mattress.
2. Thread up through the centre eyelet.
   5.Pass under the adjacent corner and tie off to opposite loop.
3. Repeat for the second tape(2) at opposite end of the blanket.
4. Pass the centre tape (3) underneath the mattress and tie to opposite loop.

If the tape is too long you can cut off the ends.

> Operating instructions model EB1500 and EB2000

Switch control (C)

1. Illuminated heat setting light
2. Heat levels 2 and 3
3. Heat level 1
4. Braille markings
5. Off position
6. Foot warmth only on/off switch

How to use switch

1. Ensure the blanket is fitted to the bed correctly.
2. Plugthepowerleadintotheclosestocket,usinganextension lead if needed to ensure that the lead is not stretched.

Preheating the bed

Movetheheatsettingthecontrolswitchtoheatlevel2and3, depending on the level of the heat required. Allow approximately 60-90 minutes for the blanket to heat the bed thoroughly, although this timemay vary depending on the room temperature and type of bedding used.

Foot warmth

Models EB1500 and EB2000 have the possibility to switch on separateandonlythefootwarmthfunction.Movetheheatsetting on the control switch to the level indicated with foot symbol. Switchoffthefootwarmthafterreachingcorrecttemperature. The foot warmth is too warm for all night use.

All night use

• Move the heat setting on the control switch to heat level 1.
• This setting will provides safe and comfortable heat to sleep on all night.
• This setting can be used to air the bed.

Warning!

Alwaysensurethattheheat settingismovedto the OFF position when you get up the next day, or after airing the bed.

Braille markings

• Braillemarkings are located on the back of the switch to help identify the direction of the heat level in the dark, or if visually impaired.
  The highestheatlevel'pre-heat'isidentifiedby3raisednodules,'midlevel'by2raised nodulesand'lowlevel'(allnight)by 1 raised nodule Fitting underblanket.

Fitting instructions

1. Place the under blanket directly on them mattress with the control switchend at the head of the bed. Don't turn the blanket over, ensure that the socket on the blanket is facing upwards.
2. Fittheshapedcornerstothemattressandturntheelasticated edges of the skirt under the mattress (E).
3. Ensure all creases are smoothed out and the skirt fits tightly round the sides of the mattress.

Cleaning and maintenance

• Examine frequently for any signs of wear or damage to the blanket, switch or cord. In case of damage or misuse, please return immediately following instructions underservicing.

• Iftheblanketfailstoperate,checkthefollowingbeforereturning:

• Ensurethattheplugandsockethavenotbecomedisconnected.

• Check that the supply plug is corrected to the flex.
• No attempt should be made to repair the blanket or have it repaired locally and the switch supplied must never bereplaced other than by the manufacturer's since the specialized components are not generally available.

Storage

• Tostore,foldcarefullyandplacebackintooriginalpackaging.
• Whenstoringtheblanket,allowittocooldnbeforefolding.
• Donotcreasetheblanketbyplacingitemsontopofit during storage.

Washing instructions

• Do NOT dry clean.
• Do NOT iron.
  Onlyuseinawashingmachinewithadrumlargeenought to take the blanket without forcing it in.
• Beforewashingensurethatyoudetachallthecontrolsfrom the blanket.
• Measure the blanket so it can best stretched back to its original size whilst wet.

Machine washing

1. Unplug the blanket from the power socket.
2. Disconnect the control switch and cord from the blanket by lifting the locking lever over the raised button and pullapart(F).
   3.Wash on the WOOL setting at 40^
3. Gently stretch the blanket back to its original shape and size before drying without applying clothesperstowheredareas of the blanket or see instructions for tumble drying.

Hand washing

1. Unplug the blanket from the power socket.
2. Disconnect the control switch and cord from the blanket by lifting the locking lever over the raised button and pullapart(F).
3. Useamildwashingliquidordetergentandlukewarmwater
4. Immerse the blanket in the water and allow to soak for 5-10 minutes.
5. Squeeze the soapy water through the fabric.
6. Rinsethe blanketthoroughlyincoolwater, gently squeezing the fabric. Warning: Do not wring dry!
7. Gently stretch the blanket back to its original shape and size before drying without applying clothespegstothewired areas of the blanket or see instructions for tumble drying.

Tumble drying

1. Controls must be removed.
2. Gently stretch the blanketbacktoitsoriginal shapebefore drying.
3. Tumbledryonthewheatsetting, following the manufacturer's instructions for the required drying time.

Environment and disposal

Neverdisposeofyourappliancewiththeregularhouseholdwaste. Followthewastedisposalregulationsofyourlocalityorreturn your appliance to retailer.

> Guarantee

The guarantee covers this product for a period of 2 years, with the exception of individual parts, beginning on the date of original purchase. Use of the guarantee does not result in extension of the guarantee period. The guarantee covers manufacturing faults and material faults in original parts.

This guarantee does not include normal wear and tear and damagetotheproductbyaccidentormisuse,abuse,alterationto theproductoruseinconsistentwiththetechnicaland/orsafety instructions required.

If your product requires repair, you should contact a unauthorized service dealer.

Neverdisposefourappliancewiththeregularhouseholdwaste. Followthewasteddisposalregulationsforyourlocalityorreturn yourappliancetotheretailer.Retaintheretailer'sreceiptasproof of purchase.

Carmenhasapolicyofcontinuousimprovementinproductquality anddesign.Carmenthereforereservesherighttochangethe specifications of its products at any time.

Glen Dimplex Benelux BV

NL

Tel.: [phone]

Fax: [phone]

www.carmen.nl

[e-mail]

B

Tel.: [phone]

Fax: [phone]

www.carmen-personalcare.be

[e-mail]