LC 348VE - Electric mower HUSQVARNA - Free user manual and instructions

Product type	Lawn mower with electric start
Brand	Husqvarna
Model	LC 348VE
Engine	Briggs & Stratton, 190 cc, power 2.4 kW
Cutting width	48 cm
Cutting height	25-70 mm, adjustable to 5 positions
Grass catcher capacity	60 L
Weight	42 kg (mower with empty tanks)
Fuel tank	1.2 L
Oil tank	0.6 L
Recommended engine oil	SAE 30
Spark plug	Champion RJ19LM, gap 0.5 mm
Start	Electric with lead-acid battery 12 V / 2.5 Ah
Drive	Self-propelled, speed 5.4 km/h
Measured sound power level	93 dB(A)
Sound pressure level	80 dB(A)
Handle vibrations	5.1 m/s²
Cutting system	3-in-1: collection, side discharge, mulching
Main functions	Mowing, collection, mulching
Routine maintenance	Check oil level, clean deck, replace blade, air filter, spark plug
Safety	Engine brake, protective cover, anti-start (battery)
Spare parts available	Blade, spark plug, air filter, battery, belt

Frequently Asked Questions - LC 348VE HUSQVARNA

How to start the Husqvarna LC 348VE mower?

Ensure the battery is charged. Fold the engine brake lever against the handlebar, insert the ignition key and push it in. Press the start bar. The engine starts electrically. If the battery is discharged, use the manual starter.

What engine oil to use for the LC 348VE?

Use good quality SAE 30 engine oil. The oil tank has a capacity of 0.6 L. Check the level with the dipstick and change the oil after the first 5 hours, then regularly.

How to adjust the cutting height?

The cutting height is adjustable to 5 positions from 25 to 70 mm using the cutting height control on the housing. Always stop the engine before changing the height.

How to clean the cutting deck?

Empty the fuel tank, place the machine on its side with the muffler facing down. Remove the maintenance hatch and brush off residue. You can also use water, but ensure the battery is disconnected.

What to do if the battery is discharged?

If the battery is discharged, you can start the machine manually with the starter cord. Recharge the battery with the supplied charger. A lead-acid 12 V / 2.5 Ah battery is recharged by plugging it into a 220 V outlet.

How to replace the mower blade?

Wear thick gloves. Remove the center bolt, take off the old blade. Mount the new blade with the bevels facing the shell. Place the friction washer, screw in the bolt and tighten to 45-60 Nm. Check that it turns freely.

What fuel to use for the LC 348VE?

Use unleaded gasoline with a minimum octane rating of 90 (RON). An ecological gasoline (alkylate) is recommended. Never use two-stroke engine oil.

How to maintain the air filter?

Remove the filter cover and take out the filter. Clean it by tapping it against a flat surface. Do not use solvent or compressed air. Replace it regularly or if damaged.

What are the essential safety equipment?

Wear non-slip shoes, long pants, and gloves for maintenance. The machine is equipped with an engine brake, protective cover, and anti-start (battery removal). Never modify the machine.

How to transport the mower safely?

Empty the fuel tank before transport. Remove the battery. Secure the machine to prevent damage. Store it in a dry, frost-free place, out of reach of children.

USER MANUAL LC 348VE HUSQVARNA

Simple line drawing of an open book enclosed in a circle (no text or symbols)

LC 348VLB

LC 348VE

LC 353V

LC 353VB

LC 353VE

LC 353VI

SYMBOLFÖRKLARING

Symbolförklaring

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical component with no visible text or symbols

Motorbromsbygel

Line drawing of two hands performing a medical procedure on a curved tube (no text or symbols)

Startbygel (LC 353VI)

Ljuddämpare

Diagram showing two mechanical assembly steps with rotating components (no text or symbols)

Three-step diagram showing a rope knot being lifted, with arrows indicating rotational direction (no text or symbols)

Technical line drawings of three different plastic housing components (cave, side, and flat) without any text or symbols.

Technical line drawing of a mechanical component with internal structure and side detail (no text or symbols)

Technical line drawing of a mechanical component with an inset view showing a close-up detail (no text or symbols)

Technical line drawing of a car interior showing a mesh basket and a grid-patterned roof (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of a two-step lawn mower system (no text or symbols)

MONTERING OCH INSTÄLLNINGAR

Mulchingfunktion

Technical line drawing of a lawn mower with an arrow indicating motion (no text or symbols)

Line drawing of a vehicle's seat and dashboard assembly (no text or symbols)

Line drawing of a car's front wheel assembly with a hand holding the seat (no text or symbols)

Mechanical component diagram showing a belt drive mechanism with a black arrow indicating the direction (no text or symbols present)

Klipphöjd

Mechanical component diagram showing a gear and wheel assembly with directional arrows (no text or labels)

Påfyllning av olja

Elektrisk start

LC 348VE, LC 353VE

Illustration of two hand positions on a tool, showing movement and assembly (no text or symbols)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of an electric vehicle's internal components, showing fan, vent, and cooling elements (no text or labels)

HANDHAVANDE

Drivning

Diagram of a mechanical clamp or connector with arrows indicating direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the rotation of the cable (no text or symbols present)

Line drawing of hands using a handheld device to interact with a device (no text or symbols)

Line drawing of a mechanical component with a curved handle and central fastener (no text or symbols)

UNDERHÅLL

Allmänt

Diagram showing a lawn mower being installed with a clamp, alongside a close-up of its cable and wiring (no text or symbols present)

Utvändig rengöring

Technical line drawing of a mechanical device with attached components (no text or symbols)

Technical line drawing of a mechanical lever with a handle and pivot (no text or symbols)

Diagram of a lever system with arrows indicating direction, no text or symbols present

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical fan or compressor assembly (no text or symbols visible)

Motorbremsebøjle

- Motorbremsen er konstrueret til at standse motoren. Når grebet om motorbremsebøjlen slippes, skal motoren standse.

Line drawing of two hands holding a tool or device (no text or symbols present)

Startgreb (LC 353VI)

Motorbremsegrebet på LC 353VI fungerer også som startgreb.

Lyddæmper

Mechanical diagram showing two configurations of a pulley or clamp mechanism, with no visible text or symbols.

Three-step diagram showing mechanical assembly steps with arrows indicating motion direction (no text or symbols)

Technical line drawings of three different plastic housing components (pool, side, and top) without any text or symbols.

Technical line drawing of a mechanical component with two views: top shows internal structure, bottom shows side profile (no text or symbols)

Technical line drawing of a mechanical component with an inset close-up showing a detail (no text or symbols)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a car interior and roof structure (no text or symbols)

Technical line drawing of a lawn mower and its side view showing mechanical components (no text or symbols)

SAMLING OG JUSTERINGER

Spredningsfunktion

Technical line drawing of a mechanical component with an arrow indicating upward motion (no text or symbols)

Technical line drawings of a vehicle chassis showing front and side views (no text or symbols)

- Luk skjoldet og sørg for, at det låses fast med spredningsproppen.

Mechanical component diagram showing a highlighted connection point (no text or symbols)

Klippehøjde

Technical line drawing of a mechanical component with arrows indicating direction (no text or symbols)

Påfyldning af olie

Elektrisk start

LC 348VE, LC 353VE

Illustration of two hand positions on a tool, showing movement and assembly (no text or symbols)

LC 353VI

Technical line drawing of a mechanical housing component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

• Løsn startspærreren (1).
• Træk startgrebet (2) ind mod dig selv. Startmotoren standser, när motoren startes.

BETJENING

Drev

Diagram of a cable or cable connector with directional arrows indicating movement (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands performing a medical procedure on a patient's abdomen (no text or symbols)

Line drawing of a car interior showing the seat and dashboard (no text or symbols)

Generelt

Diagram showing a lawn mower being installed with a tool, alongside a close-up of the installation detail (no text or symbols present)

Udvendig rengøring

• Fjern servicelugen

Line drawing of a mechanical device with gears and a base component (no text or symbols)

Technical line drawing of a mechanical lever with a handle and pivot (no text or symbols)

Diagram of a blade cutting through grass with arrows indicating direction (no text or symbols)

Mechanical assembly diagram showing a rotating component with gears and shafts (no text or labels)

Technical line drawing of a mechanical housing component with an arrow indicating assembly or insertion (no text or symbols present)

Line drawing of a hand holding a tool with a directional arrow (no text or symbols)

LC 353VI

Technical line drawing of a mechanical fan or compressor assembly (no text or symbols)

Motorbremsebøyle

Line drawing of two hands holding a cable or wire (no text or symbols)

Startstang (LC 353VI)

Lyddemper

AD VARSEL! Bruk aldri en maskin uten lyddemper eller med defekt lyddemper. En defekt lyddemper kan øke lydnivået og brannfaren betraktelig. Ha verktøy for brannslokking tilgjengelig.

Mechanical diagram showing two configurations of a pulley or linkage mechanism with rotational arrows (no text or symbols)

Three-step diagram showing mechanical assembly steps with arrows indicating motion direction (no text or symbols)

Technical line drawing of three views of a mechanical housing or enclosure (no text or symbols)

Technical line drawing of a mechanical component with two views (top and side), no text or symbols present.

Technical line drawing of a mechanical component with an inset detail showing a close-up view of a corner detail (no text or symbols present)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of two different lawn lawn equipment configurations (no text or symbols)

MONTERING OG JUSTERINGER

Mulchingfunksjon

Technical line drawing of a mechanical assembly with no visible text or symbols

Technical line drawings of two vehicle components, one showing a seat assembly and the other a steering wheel (no text or symbols)

Mechanical component diagram showing a highlighted connection point (no text or symbols)

Klippehøyde

Mechanical diagram showing a gear or cam mechanism with directional arrows indicating movement (no text or symbols present)

Påfylling av olje

Elektrisk start

LC 348VE, LC 353VE

Illustration of two hand positions on a tool, showing movement and adjustment (no text or symbols)

LC 353VI

Maskinen har elektrisk start via en startstang.

- Før du bruker den elektroniske starten for første gang, må du aktivere batteriet. Se anvisningene i delen "Vedlikehold".

Technical line drawing of a mechanical component with an arrow indicating assembly or insertion (no text or symbols present)

Technical line drawing of a mechanical component with a highlighted internal structure (no text or symbols)

• Løsne startsperren (1).
- Trekk startstangen (2) mot deg. Startmotoren stopper när motoren startes.

BETJENING

Drift

Diagram of a mechanical device with arrows indicating motion or force direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the rotation of the cable (no text or symbols present)

Line drawing of hands using a handheld device to interact with a device (no text or symbols present)

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

Generelt

Line drawing of a lawn mower with attached circuit board and power tool, shown in two views: one showing cable installation (no text or symbols)

Utvendig rengjøring

Technical line drawing of a mechanical device with attached components (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a lever system with arrows indicating direction, no text or symbols present

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or insertion (no text or symbols present)

VIGTIG! Batteriet på denne modellen er en sikkerhetskomponent. Bruk alltid originale reservedeler.

Lade batteri.

Line drawing of a hand holding a tool with a mechanical component, no text or symbols present

• LC 353VI

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Moottorijarrusanka

Line drawing of two hands holding a medical instrument (no text or symbols)

Äänenvaimennin

Mechanical diagram showing two configurations of a pulley or linkage mechanism with rotational arrows (no text or symbols)

Three-step diagram showing mechanical assembly steps: rope knot, pulley mechanism, and frame connection (no text or symbols)

Kerääjän asennus

Technical line drawings of three different plastic housing components (cylindrical, side, and polygonal) with no visible text or symbols.

Technical line drawing of a plastic container with internal compartments and an inset close-up showing internal structure (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and detail view (no text or symbols)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view (no text or symbols)

Technical line drawing of a lawn mower with hand operating controls (no text or symbols)

ASENNUS JA SÄÄDÖT

Silppuritoiminto

Technical line drawing of a mechanical component with an arrow indicating upward motion (no text or symbols present)

Technical line drawings of two vehicle chassis components, showing front and side views (no text or symbols)

Mechanical assembly diagram showing a clamping mechanism with a black arrow indicating force direction (no text or symbols present)

Leikkuukorkeus

Mechanical diagram showing a gear or cam mechanism with directional arrows indicating motion (no text or symbols)

Öljyn täyttö

Sähkökäynnistys

LC 348VE, LC 353VE

Illustration of two hand positions on a tool, showing movement and adjustment (no text or symbols)

LC 353VI

Technical line drawing of a two-port electronic device with internal components and an arrow indicating assembly (no text or symbols)

Technical line drawing of a mechanical component with no visible text or symbols

Veto

Diagram of a hand holding a cable with arrows indicating force direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands using a handheld device to interact with a cable or cable (no text or symbols)

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

Yleistä

Diagram showing a lawn mower being cleaned with a tool, with no visible text or symbols

Ulkoinen puhdistus

Line drawing of a mechanical device with gears and a battery (no text or symbols)

Technical line drawing of a mechanical lever with a handle and pivot (no text or symbols)

Diagram of a lever system with arrows indicating direction, no text or symbols present

Mechanical diagram showing a rotating component with arrows indicating rotation (no text or labels)

Technical line drawing of a two-part electronic device housing with an arrow indicating assembly or connection (no text or symbols present)

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Please read the operator's manual carefully and make sure you understand the instructions before using the machine.

Keep people and animals well away from the working area.

Prevent unintentional starting by removing the ignition cable from the spark plug.

Watch out for thrown objects and ricochets.

Warning: rotating cutter. Keep hands and feet clear.

Warning: rotating parts. Keep hands and feet clear.

This product is in accordance with applicable EC directives.

Noise emission to the environment according to the European Community's Directive. The machine's emission is specified in the Technical data chapter and on the label.

Never use the machine indoors or in spaces lacking proper ventilation. Exhaust fumes contain carbon

monoxide, an odourless, poisonous and highly dangerous gas.

Risk of explosion

Always shut off the engine before refuelling.

Hot surface.

Stop the engine.

Start the engine

Remove the safety switch (battery) before performing maintenance work or leaving the machine unattended.

Explanation of warning levels

The warnings are graded in three levels.

WARNING!

WARNING! Used if there is a risk of serious injury or death for the operator or damage to the surroundings if the instructions in the manual are not followed.

IMPORTANT!

IMPORTANT! Used if there is a risk of injury to the operator or damage to the surroundings if the instructions in the manual are not followed.

CAUTION!

CAUTION! Used if there is a risk of damage to materials or the machine if the instructions in the manual are not followed.

CONTENTS

Contents

KEY TO SYMBOLS

Key to symbols 74

Explanation of warning levels 74

CONTENTS

Contents 75

PRESENTATION

Dear Customer, 76

Steps before using a new lawn mower 76

WHAT IS WHAT?

What is what on the lawn mower? 77

MACHINE'S SAFETY EQUIPMENT

General 78

ASSEMBLING AND ADJUSTMENTS

General 79

Handle 79

Cutting height 80

Filling with oil 80

FUEL HANDLING

General 81

Fuel 81

Fueling 81

Transport and storage 81

OPERATING

Personal protective equipment 82

General safety precautions 82

Basic working techniques 83

Transport and storage 83

Starting and stopping 84

MAINTENANCE

General 86

Maintenance schedule 86

General inspection 86

External cleaning 86

Oil level 86

Oil change 86

Cutting equipment 87

Battery 88

Spark plug 88

Air filter 88

Fuel system 88

Recycling 88

TECHNICAL DATA

Technical data 89

EC Declaration of Conformity 91

Dear Customer,

Congratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River, for production of muskets. The location was logical, since water power was harnessed from the Huskvarna River to create the water-powered plant. During the more than 300 years in existence, the Husqvarna factory has produced a lot of different products, from wood stoves to modern kitchen appliances, sewing machines, bicycles, motorcycles etc. In 1956, the first motor driven lawn mowers appeared, followed by chain saws in 1959, and it is within this area Husqvarna is working today.

Today Husqvarna is one of the leading manufacturers in the world of forest and garden products, with quality as our highest priority. The business concept is to develop, manufacture and market motor-driven products for forestry and gardening, as well as for the building and construction industry. Husqvarna's aim is also to be at the front edge for ergonomics, usability, security and environmental protection. That is the reason why we have developed many different features to add to our products within these areas.

We are convinced that you will appreciate with great satisfaction the quality and performance of our product for a very long time to come. The purchase of one of our products gives you access to professional help with repairs and service whenever this may be necessary. If the retailer who sells your machine is not one of our authorised dealers, ask for the address of your nearest service workshop.

It is our wish that you will be satisfied with your product and that it will be your companion for a long time. Think of this operator's manual as a valuable document. By following its content (usage, service, maintenance, etc), the life span and the second-hand value of the machine can be extended. If you sell this machine, make sure that the operator's manual is passed on to the buyer.

Thank you for using a Husqvarna product.

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

Steps before using a new lawn mower

• Please read the operator's manual carefully.
• Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly.
• Fill with fuel and oil in the engine. A container with sufficient oil quantity is supplied with the machine. See the instructions under the heading fuel handling.

WARNING! Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use original accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

WARNING! A lawn mower is a dangerous tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this operator's manual.

WARNING! Long-term inhalation of the engine's exhaust fumes can represent a health hazard.

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

WHAT IS WHAT?

What is what on the lawn mower?

1 Handle / handlebar
2 Drive
3 Starter handle (LB 348V, LC 348V, LC 353V, LV 353VB)
4 Grass catcher (not LB348V)
5 Fuel tank
6 Air filter
7 Spark plug
8 Cutting cover
9 Muffler
10 Water connector

11 Protective cover
12 Oil tank
13 Cutting height control
14 Rear deflector (not LB348V)
15 Engine brake handle / Start bar (LC 353VI)
16 Blade brake (LC 353VB) / Start inhibitor (LC 353VI)
17 Electric starter (LC 353VE, LC 348VE)
18 Symbols
19 Operator's manual
20 Stop switch

MACHINE'S SAFETY EQUIPMENT

General

This section describes the machine's safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly.

WARNING! Never use a machine that has faulty safety equipment! If your machine fails any checks contact your service agent to get it repaired.

Prevent unintentional starting by removing the ignition cable from the spark plug.

Cutting cover

- The cutting cover is designed to reduce vibration and to reduce the risk of cuts.

Checking the cutting cover

- Make sure the cutting cover is not damaged and that there are no visible defects such as cracks.

Ignition key (LC 353VE, LC 348VE)

Machines with electric start have a starter key or an easily removed battery. These should be kept separate from the machine when it is not being used or is unattended.

- Pull the key towards you to remove it.

Line drawing of a hand using a tool to adjust or install a mechanical component (no text or symbols present)

• LC 353VI

To remove the battery (main switch), hold in the lock buttons and pull it to the side.

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Engine brake handle

- The engine brake is designed to stop the engine. When the grip on the engine brake handle is released the engine should stop.

Checking the engine brake handle

- Start the engine and then release the brake handle. The engine should stop and the drive should disengage. The engine brake should always be adjusted so that the engine stops within 3 seconds.

Line drawing of two hands holding a tool or device, no text or symbols present

Start bar (LC 353VI)

The engine brake bar on the LC 353VI also acts as a start bar.

The function of the start inhibitor must be checked in order to prevent accidental start.

Check of start inhibitor

- Pull the start bar towards you and make sure the start inhibitor prevents the bar activating the starter motor.

- Make sure the start inhibitor easily returns to its original position after activation.

Muffler

WARNING! Never use a machine without a muffler, or with a faulty muffler. A damaged muffler may substantially increase the noise level and the fire hazard. Keep fire fighting equipment handy.

The muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapours.

- The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user.

Inspecting the muffler

- Check regularly that the muffler is complete and secured correctly.

ASSEMBLING AND ADJUSTMENTS

General

IMPORTANT! Prevent unintentional starting by removing the ignition cable from the spark plug.

Handle

Assembly

- Loosen the lower knobs.

Two diagrams showing mechanical components with rotational arrows, no text or symbols present

- Adjust the hight of the handle and tighten the knobs securely.

Three-step diagram showing rope knotting and lifting mechanism (no text or symbols)

Assembly of the catcher

Technical line drawings of three views of a plastic housing or enclosure (no text or symbols)

- Hook the upper cover on the attachments on the lower cover.

Technical line drawing of a plastic container with internal structure and side profile details (no text or symbols)

- Lower the upper cover. Make sure the edge strip is placed on the outside of the lower cover.

Technical line drawing of a mechanical component with cross-sectional view and side detail (no text or symbols)

- Start by hooking the end of the metal ledge into the slots of the lower cover.

Technical line drawing of a car interior showing a mesh basket and a grid-patterned roof (no text or symbols)

- Guide the metal ledge around both the upper and lower cover. Fasten the metal ledge on the lower cover.

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

- Lift the hind shield and suspend the grass container.

Technical line drawing of two lawn lawners operating a lawn mower, showing hand positioning and tool path (no text or symbols)

ASSEMBLING AND ADJUSTMENTS

Mulching function

A mulching-kit is available as an accessory, to make the machines equipped with a catcher able to be used with mulching function.

The Mulching-kit consist of a mulching plug and a mulching knife.

Fit the mulching plug in place.

- Lift up the back shield and remove the container.

Technical line drawing of a mechanical component with an arrow indicating upward motion (no text or symbols)

- Insert the mulching plug into the collector channel.

Line drawing of a vehicle's wheel assembly with no visible text or symbols

Line drawing of a car's front wheel assembly with a hand holding the seat (no text or symbols)

- Close the shield and ensure that it is locked with the mulching plug.

Line drawing of a car seatbelt with a black arrow indicating a specific seat (no text or symbols present)

Cutting height

CAUTION! Do not set the cutting height too low as there is a risk that the cutters might hit ground with unevenness.

The cutting height can be adjusted in five different steps, mm.

Mechanical diagram showing a gear assembly with directional arrows indicating motion (no text or symbols)

Filling with oil

- The oil tank is empty at delivery. Fill the oil slowly. See also instructions under the Maintenance heading. The engine oil should be changed the first time after 5 hours running time.

General

WARNING! Running an engine in a confined or badly ventilated area can result in death due to asphyxiation or carbon monoxide poisoning.

Fuel and fuel fumes are highly inflammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

Do not smoke and do not place any hot objects in the vicinity of fuel.

Fuel

NOTICE! The machine is equipped with a four-stroke engine. Make sure that there is always sufficient oil in the oil tank.

Petrol

• Use good quality unleaded or leaded petrol.
• The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so-called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.
• Use low-emission petrol, also known as alkylate petrol, if it is available.

Engine oil

NOTICE! Check the oil level before starting the lawn mower. A too low oil level can cause serious damage to the engine.

• See instructions in the section "Maintenance".
- The engine oil should be changed the first time after 5 hours running time. Refer to Technical Data for recommendations on which oil type to use. Never use oil intended for two-stroke engines.

Fueling

WARNING! Always stop the engine and let it cool for a few minutes before refuelling. The engine should be switched off, and the stop switch in STOP position.

Use a petrol can at all times to avoid spillage.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Clean the area around the fuel cap.

Tighten the fuel cap carefully after refuelling. Negligence may lead to the start of a fire.

Move the machine at least 3 m from the refuelling point before starting it.

Never start the machine:

• If you have spilled fuel or engine oil on the machine. Wipe off the spill and allow the remaining fuel to evaporate.
• If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.
• If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

• Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or open flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.
• When storing and transporting fuel always use approved containers intended for this purpose.

Long-term storage

- When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out where to dispose of excess fuel.

OPERATING

Personal protective equipment

You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

Always wear:

• Sturdy, non-slip boots or shoes.
• Heavy, long pants. Do not wear shorts, sandals or go barefoot.
• Gloves must be worn when required, for example when fitting, inspecting or cleaning cutting attachments.

General safety precautions

This section describes basic safety directions for using the machine. This information is never a substitute for professional skills and experience.

• Please read the operator's manual carefully and make sure you understand the instructions before using the machine.
• Keep in mind that the operator is responsible for accidents or hazards occurring to other people or their property.
• The machine must be kept clean. Signs and stickers must be fully legible.

Always use common sense

It is not possible to cover every conceivable situation you can face. Always exercise care and use your common sense. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your dealer, service agent or an experienced user. Do not attempt any task that you feel unsure of!

WARNING! This machine produces an electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Never allow children or other persons not trained in the use of the machine to use or service it.

The machine should not be used by people with reduced physical or mental capacities or people who are unsuitable for health reasons to operate the machine, without supervision of a person responsible for their safety.

Never allow anyone else to use the machine without first ensuring that they have read and understood the contents of the operator's manual.

Never use the machine if you are fatigued, while under the influence of alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgement.

WARNING! Unauthorized modifications and/or accessories may lead to serious injury or death to the user or others. Under no circumstances may the design of the machine be modified without the permission of the manufacturer.

Do not modify this product or use it if it appears to have been modified by others.

Never use a machine that is faulty. Carry out the safety checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the Maintenance heading.

Always use genuine accessories.

OPERATING

Work area safety

• Branches, twigs, stones, etc. should be removed from the lawn before you start to mow.
• Objects hitting against the cutting attachment could be thrown and cause damage to people and objects. Keep people and animals well away.
• Never use the machine in bad weather, for instance in fog, in rain, damp or in wet locations, strong winds, intense cold, risk of lightning, etc. Working in bad weather is tiring and can lead to dangerous conditions, e.g. slippery surfaces.
• Observe your surroundings to ensure that nothing can affect your control of the machine.
• Beware of roots, stones, twigs, pits, ditches etc. Tall grass can hide obstacles.
• Mowing slopes can be dangerous. Do not use the lawn mower on very steep slopes. The lawn mower should not be used on inclines greater than 15 degrees.
• On sloping ground you should work along the slope. It is much easier to work along a slope than it is to work up and down it.
• Be careful when you are approaching hidden corners and objects that could block your view.

Work safety

• A lawn mower is only designed to mow lawns. All other use is forbidden.
• Wear personal protective equipment. See instructions under the "Personal protective equipment" heading.
• Do not start a lawn mower unless the cutter and all covers are fitted correctly. Otherwise the cutter could come loose and cause personal injuries.
• Make sure the cutter does not hit foreign objects such as stones, roots or the like. This can make the cutter dull and bend the engine shaft. A bent axle gives imbalance and heavy vibration, which results in a great risk of the cutter becoming loose.
• The brake handle must never be permanently anchored in handle when the machine is running.
• Place the lawn mower on firm, flat surface and start it. Make sure that the cutter cannot come into contact with the ground or other objects.
  • Always place yourself behind the machine. Allow all the wheels to remain on the ground and keep both hands on the handle when mowing. Keep your hands and feet away from the rotating blades.
• Do not tilt the machine when the engine is running. Never run with the machine when it is running. You should always walk with the lawn mower.
• Pay particular attention when pulling the machine towards you during work.
• Never lift up the lawn mower or carry it around when the engine is running. If you must lift the lawn mower,

first switch off the engine and disconnect the ignition lead from the spark plug.

• Do not mow the lawn while walking backwards.
• The engine should be switched off when moving over ground that is not to be mowed. For example, gravel paths, stone, shingle, asphalt, etc.
• Never run with the machine when it is running. You should always walk with the lawn mower.
• Shut down the engine before changing the cutting height. Never make adjustments with the engine running.
• Never leave the machine unsupervised with the motor running. Turn off the motor. Ensure the cutting attachment has stopped rotating.
• If any foreign object is hit or if vibrations occur stop the machine immediately. Disconnect the HT lead from the spark plug. Check that the machine is not damaged. Repair any damage.

Basic working techniques

• Always cut with a sharp blade for optimal results. A dull blade gives an uneven cut and the grass becomes yellow on the surface of the cut.
• Never mow more than 1/3 of the length of the grass. This especially applies during dry periods. Mow first with the cutting height set high. Then check the result and lower to an appropriate height. If the grass is really long, drive slowly and mow twice if necessary.
• Cut in different directions each time in order to avoid stripes in the lawn.
• Before pulling the machine towards you, disengage the drive and push the machine forward approx. 10 cm.
• Make sure to disengage the drive when approaching an obstacle.

Transport and storage

• Secure the equipment during transportation in order to avoid transport damage and accidents.
• Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons.
• Store the machine and its equipment in a dry and frost proof place.
• For transport and storage of fuel, see the section "Fuel handling".
• Always remove the battery when the machine is left unattended. (LC 353VI)

OPERATING

Starting and stopping

Before starting

WARNING! Please read the operator's manual carefully and make sure you understand the instructions before using the machine.

Wear personal protective equipment. See instructions under the "Personal protective equipment" heading.

• Keep people and animals well away from the working area.
• Perform daily maintenance. See instructions in the section "Maintenance".
• Ensure the ignition lead sits correctly on the spark plug.

Manual Start

The engine brake handle must be held against the handlebar when the engine is started.

LB 348V, LC 348V, LC 353V

• Position yourself behind the machine.
• Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip). Pull with force to start the engine. Never twist the starter cord around your hand.

LC 353VB

• Position yourself behind the machine.
• Set the stop switch to the start position.

Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip). Pull with force to start the engine. Never twist the starter cord around your hand.

LC353VB are equipped with a blade brake. To make the cutters rotate, do the following:

• Loosen the latch on the blade brake (1).
  • Pull the engine brake bar (2) towards you

Electric Start

LC 348VE, LC 353VE

LC 348VE and LC 353VE are equipped with electronic start which is used in the following way.

• Before using the electronic start for the first time you need to charge the battery. See instructions in the section "Maintenance".
• Fold in the engine brake handle towards the handlebar.
• Insert the ignition key and push the key.

Illustration of two hands holding a tool, showing a step and angle (no text or symbols)

LC 353VI

The machine has electric start via a start bar.

- Before using the electronic start for the first time you need to activate the battery. See instructions in the section "Maintenance".

Technical line drawing of a mechanical housing component with an arrow indicating assembly or transformation (no text or symbols present)

LC 353VI has a start inhibitor. Proceed as follows to start the engine and blade rotation:

- Fit the battery in the intended compartment on the engine and check the battery status.

For more information, see the "Battery" section.

Technical line drawing of a mechanical component with no visible text or symbols

• Loosen the start inhibitor (1).
• Pull the start bar (2) towards you. The starter motor will stop when the engine is started.

OPERATING

Drive

• To use the drive on the wheel pull the clutch lever towards you.

Diagram of a mechanical clamp or connector with arrows indicating direction (no text or symbols)

When the drive starts feeling slow you need to adjust the clutch wire. Finely adjust the wire using the adjuster screw.

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

- To tension the wire and increase speed, screw the adjustment screw counterclockwise.

Make sure the wires are not tensioned too tight. If the lawn mower starts to drive without the clutch lever is beeing operated, extend the wire.

- To extend the wire and reduce speed, screw the adjustment screw clockwise.

Stopping

LB 348V, LC 348V, LC 348VE, LC 353V, LC 353VE, LC353VI

- Stop the engine by releasing the engine brake bar/start bar. The drive is also disengaged when you release the engine brake bar/start bar.

IMPORTANT!

For LC 348VE and LC 353VE remove the key.

LC 353VI Always remove the battery when the machine is not in use or when the machine is left unattended.

LC353VB

The cutter stops rotating when you release the brake handle.

Line drawing of hands holding a tool on a mechanical device (no text or symbols)

The engine is switched off by moving the stop switch to the stop position.

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

General

WARNING! The user must only carry out the maintenance and service work described in this Operator's Manual. More extensive work must be carried out by an authorized service workshop.

Switch off the engine before carrying out any checks or maintenance. Prevent unintentional starting by removing the ignition cable from the spark plug. The starter key or battery must also be removed on machines with electric start.

The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest service workshop.

• Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.
• Replace any damaged, worn or broken parts.
  • Always use genuine accessories.

Maintenance schedule

In the maintenance schedule you can see which parts of your machine that require maintenance, and with which intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending on the rate of usage.

Daily maintenance	Weekly maintenance	50 hours	At least once a year
General inspection	Spark plug	Replacing and adjusting the V-belt	Replacing and adjusting the V-belt
Oil level Muffler*	Air filter Air filter
External cleaning	Vibration damping system*	Fuel system	Fuel system
Cutting equipment		Oil change	Oil change
Cutting cover and protective cover*
Engine brake handle*

*See instructions in the section "Machine's safety equipment".

General inspection

- Check that nuts and screws are tight.

LC353VB

Make sure the cable clip is properly secured to the bracket. If the cable clip feels loose or have fallen of, mount the clip back into place.

Diagram showing a lawn mower being installed with a tool, alongside a close-up of the installation detail (no text or symbols present)

External cleaning

• Brush leaves, grass and the like off of the lawn mower.
• Do not use a high pressure washer to clean the machine.
• Never flush water directly on the engine.
• Clean the air intake on the starter. Check the starter and starter cord.
• When cleaning under the cutting cover, empty the fuel tank and put the machine on its side with the muffler down.

Cleaning of the gear housing.

- Remove the service hatch.

Line drawing of a mechanical device with attached components (no text or symbols)

- Brush leaves and grass off of gear housing. If necessary clean the gear housing with water. For LC348Ve and LC353VE make sure the battery is disengaged.

Oil level

The lawn mower should stand on flat ground when you check the oil level. Check the oil level with the dipstick on the oil filler cap.

• Remove the oil cap and wipe the dipstick clean.
• Put the dipstick back in. The oil filler cap must be completely screwed down to give a correct picture of the oil level.
• If the oil level is low, fill using engine oil up to the upper level on the dipstick.

Oil change

• Empty the fuel tank.
• Unscrew the oil filler cap.
• Place a suitable vessel to collect the oil in.
• Drain the oil by tipping the engine so that the oil runs out through the filler pipe. Ask where you can dispose of surplus engine oil at your local petrol station.
• Fill with new engine oil of a good quality. See instructions in the section "Technical data".

MAINTENANCE

Cutting equipment

• Check the cutting attachment for damage or cracks. A damaged cutting attachment should always be replaced.
  • Always ensure the cutter is well ground and balanced correctly.

WARNING! Always wear heavy-duty gloves when servicing and maintaining the cutting equipment. The cutters are very sharp and cuts can occur very easily.

CAUTION! The blades should be balanced after sharpening. Balancing, replacing or sharpening the blades should be conducted by a service workshop.

Damaged blades should be replaced when hitting obstacles that result in a breakdown.

Replacing the blades

Dismantling:

- Unscrew the bolt holding the cutter.

Technical line drawing of a mechanical lever with a handle and pivot (no text or symbols)

- Remove the old blade. Make sure the blade bracket is free of damage. Also check that the cutter bolt is undamaged and that the engine shaft is not bent.

Assembly:

- The blade must be mounted with the angled ends pointing up towards the cover.

Diagram of a lever mechanism over grass, showing directional arrows (no text or symbols)

• Place the cutter with the friction washer against the cutter bracket. Make sure the cutter centres correctly on the shaft. To avoid vibrations, place the mower cutter so that the cutter bracket marking can be seen on the sides of the cutter.
• Fit the washer and tighten the bolt correctly. The bolt should be tightened with a torque of 45-60 Nm.

Mechanical diagram showing a rotating component with arrows indicating motion (no text or symbols)

• Pull the blade around by hand and make sure it rotates freely.
• Test run the machine.

IMPORTANT!

Always exercise care and use your common sense. Avoid all situations which you consider to be beyond your capability. If you still feel uncertain about operating procedures after reading these instructions, you should consult an expert before continuing. Contact an authorised service workshop.

Always use genuine parts. For more information, see the "Technical data" section.

MAINTENANCE

Battery

IMPORTANT! An exhausted battery must not be disposed of as household garbage! Leave it at your nearest service agent or collection point.

LC 353VE, LC 348VE

The battery is a totally enclosed 12 volt lead battery that usually does not require maintenance. The battery is charged during mowing.

If the engine refuses to start repeatedly, the battery could become discharged. If that is the case, start the machine manually using the starter cord. A completely discharged battery can be recharged using the battery charger supplied.

- Check all cables and connections. Never use the machine if any cable or plug is damaged, but hand it in to an authorized service workshop for repair.

Charging the battery

NOTICE! The battery might need recharging once or twice during mowing season and should always be charged prior to winter storage.

Do not charge at temperatures below +5° C.

• Disassemble the cable contact at the battery.
• Connect the battery cable to the charger, then connect the charger to a wall socket (220 V, 50 Hz).

LC 353VI

The battery is a safety switch and must only be mounted on the engine when the machine is in use.

The battery is an intelligent 10.8V lithium battery that must be activated before being used for the first time.

Place the battery into the charger and wait until at least 1 green lamp comes on (10 seconds). The battery can then be mounted on the engine.

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

IMPORTANT! The battery on this model is a safety component. Always use genuine parts.

Charge the battery.

The battery has an easy-check voltage indicator with LEDs (1-4).

If the voltage is too low (1 or 0 LEDs lit), place the battery in the charger and connect to a wall socket (220V, 50Hz).

A flat battery will be fully charged after about 60 minutes.

The battery can be quick-charged for shorter periods without damage.

Lamp indicator on battery.	Cause
Constant red light Battery charging.
Flashing red light	Battery too warm and will start to charge when correct temperature has been reached.
Constant green light The battery is fully charged.
Flashing red and green light	Battery damaged and must be replaced.

Spark plug

NOTICE! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.

• If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking other steps.
• If the spark plug is dirty, clean it and check that the electrode gap is 0.5 mm . Replace if necessary.

Air filter

• Remove the air filter cover and take out the filter.
• Clean the filter by knocking the filter against a flat surface. Never use solvent with petroleum, for example, kerosene, or compressed air to clean the filter.
• An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter must always be replaced.
• When reassembling, make sure that the filter completely seals against the filter holder.

Fuel system

• Check that the fuel cap and its seal are not damaged.
• Check the fuel hose. Replace if necessary.

Recycling

This machine has the prerequisites to last for many years. This minimizes the machine's environmental impact. Perform service and maintenance according to the instructions in this manual. This way the engine will last longer and the hazardous emissions are minimized. The machine is dismantled and the parts are divided up in different materials for recycling. Most parts of this machine are recyclable.

TECHNICAL DATA

Technical data

	LC353V LC353	VB LC353VE LC 353VI
Engine
Engine manufacturer	Briggs & Stratton	Briggs & Stratton	Briggs & Stratton	Briggs & Stratton
Cylinder displacement, cm3	161 161 161 161
Speed, rpm 2900 2900 2900 2900
Nominal engine output, kW (see note 1) 2,7 2,7 2,7 2,7
Ignition system
Spark plug	Champion QC12YC	Champion QC12YC	Champion QC12YC	Champion QC12YC
Electrode gap, mm 0,5 0,5 0,5 0,5
Fuel and lubrication system
Fuel tank capacity, litre 1,0 1,0 1,0 1,0
Oil tank capacity, litre 0,6 0,6 0,6 0,6
Engine oil SAE 30 SAE 30 SAE 30	SAE 30
Weight
Lawn mower with empty tanks, kg	41	45	43	42
Noise emissions (see note 2)
Sound power level, measured dB (A)	98	97	98	97
Sound power level, guaranteed LWA dB (A)	98	98	98	98
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A)	84	83	84	84
Vibration levels (see note 4)
Handle, m/s2	4,0 4,0 4,0 5,3
Cutting
Cutting height, mm	25-70	25-70	25-70	25-70
Cutting width, cm	53	53	53	53
Cutter	Collect	Collect	Collect	Collect
Part number	5104364-10	5104365-10	5104364-10	5104364-10
Bagger capacity, litre	60	60	60	60
Drive
Speed, km/h	5,4 5,4 5,4 5,4
Starting
Electric starter	-	-	Yes	Yes
Battery	-	-	Lead, 12V/2,5Ah	Li-ion, 12V/15,7Wh

Note 1 The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power ( L_WA ) in conformity with EC directive 2000/14/EC.
Note 3: Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A).
Note 4: Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s² .

TECHNICAL DATA

	LC348V LC348VE	LB348V
Engine
Engine manufacturer Briggs & Stratton Briggs & Stratton	Briggs & Stratton
Cylinder displacement, cm3	190 190 190
Speed, rpm 2900 2900 2900
Nominal engine output, kW (see note 1) 2,4 2,4 2,4
Ignition system
Spark plug	Champion RJ19LM	Champion RJ19LM	Champion RJ19LM
Electrode gap, mm 0,5 0,5 0,5
Fuel and lubrication system
Fuel tank capacity, litre 1,2 1,2 1,2
Oil tank capacity, litre 0,6 0,6 0,6
Engine oil	SAE 30	SAE 30	SAE 30
Weight
Lawn mower with empty tanks, kg	40	42	36
Noise emissions (see note 2)
Sound power level, measured dB (A)	94	93	94
Sound power level, guaranteed LWA dB (A)	95	95	95
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A)	80	80	80
Vibration levels (see note 4)
Handle, m/s2	5,1 5,1 3.8
Cutting
Cutting height, mm 25-70 25-70	25-70
Cutting width, mm	480 480 480
Cutting system	3 in 1	3 in 1	2 in 1
Cutting width, mm	480 480 480
Cutter	Collect	Collect	Mulch
Part number	5856075-10	5856075-10	5028813-20
Bagger capacity, litre 60 60	-
Drive
Speed, km/h	5,4 5,4 5,4
Starting
Electric starter	-	Yes	-
Battery	-	Lead, 12V/2,5Ah	-

Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power ( L_WA ) in conformity with EC directive 2000/14/EC.
Note 3: Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A).
Note 4: Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s² .

EC Declaration of Conformity

(Applies to Europe only)

Husqvarna AB, SE-561 82 Huskvarna, Sverige, tel: [phone], declares under sole responsibility that the lawn mowers LB348V, LC348V, LC348VE, LC353V, LC353VB, LC 353VI and LC353VE Ee from the serial numbers 14xxxxxxx and onwards comply with the requirements of the COUNCIL'S DIRECTIVE:

• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
• of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.

For information relating to noise emissions, see the Technical data chapter.

The following standards have been applied: ISO 5395, ISO 11094, EN 55012.

0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, has issued reports regarding the assessment of conformity according to annex VI of the COUNCIL'S DIRECTIVE of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.

Huskvarna 19 may 2014

$$ \Delta \cdot 2 m $$

Claes Losdal, Development Manager/Garden Products

(Authorized representative for Husqvarna AB and responsible for technical documentation.)

SYMBOLERKLÄRUNG

Symbolerklärung

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

• LC 353VI

Technical line drawing of a mechanical fan or compressor assembly (no text or symbols)

Motorbremsbügel

Line drawing of hands holding a tool or device (no text or symbols)

Starthebel (LC 353VI)

Schalldämpfer

Two diagrams showing mechanical components with rotational arrows, no text or symbols present

Three-step diagram showing rope knotting and lifting mechanism (no text or symbols)

Technical line drawings of three different plastic housing components (cave, side, and flat plate) without any text or symbols.

Technical line drawing of a mechanical component with two views: top shows internal structure, bottom shows side profile (no text or symbols)

Technical line drawing of a mechanical component with an inset detail showing a close-up view of a corner detail (no text or symbols present)

Technical line drawing of a car interior showing a mesh basket and a grid-patterned roof (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and top view (no text or symbols)

Technical line drawing of a lawn mower and its side view (no text or symbols)

Technical line drawing of a lawn mower with a handle and blade (no text or symbols)

Technical line drawing of a mechanical component or bracket assembly (no text or symbols)

Line drawing of a car's front view showing steering wheel and dashboard (no text or symbols)

Line drawing of a vehicle seatbelt with a black arrow indicating a specific component (no text or symbols present)

Schnitthöhe

Technical line drawing of a mechanical component with arrows indicating assembly or movement (no text or symbols)

Auffüllen von Öl

Elektrostart

LC 348VE, LC 353VE

Illustration showing two hand positions on a tool, one with arrows indicating movement or force direction (no text or symbols)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with an arrow pointing to a circular feature (no text or symbols present)

Antrieb

Diagram of a medical or surgical device with attached tubing and connectors (no text or labels)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands performing a medical procedure on a patient's abdomen (no text or symbols)

Line drawing of a mechanical component with a curved handle and a black arrow indicating direction (no text or symbols)

Allgemeines

Diagram showing a lawn mower being installed with a tool, alongside a close-up of the motor (no text or symbols present)

Außenreinigung

Line drawing of a mechanical device with attached components (no text or symbols)

Technical line drawing of a mechanical bracket with a knob and base mount (no text or symbols)

Diagram of a blade under an arch over grass, with arrows indicating direction (no text or symbols)

Mechanical assembly diagram showing a rotating component with arrows indicating motion (no text or labels)

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Wat is wat op de grasmaaier?

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

• LC 353VI

Technical line drawing of a mechanical fan or motor assembly (no text or symbols visible)

Motorrembeugel

Line drawing of a hand holding a medical instrument (no text or symbols present)

Starthendel (LC 353VI)

Geluiddemper

Mechanical diagram showing two configurations of a pulley mechanism with rotational arrows (no text or labels)

Three-step diagram showing a rope knot being lifted, with arrows indicating rotational direction (no text or symbols)

Technical line drawings of three different plastic housing components (cave, side, and hexagonal frame) without any text or symbols.

Technical line drawing of a plastic container with internal structure and side profile details (no text or symbols)

Technical illustration of a mechanical component with cross-sectional view and detail view (no text or symbols)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of a two-part lawn mower system with no text or symbols

MONTAGE EN AFSTELLINGEN

Mulchfunctie

Technical line drawing of a mechanical component with an arrow indicating direction (no text or symbols present)

Technical line drawings of two vehicle components, one showing front wheel assembly and the other showing rear wheel assembly (no text or symbols)

Line drawing of a mechanical component with a black arrow indicating a downward motion (no text or symbols present)

Maaihoogte

Technical line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Olie bijvullen

Elektrische start

LC 348VE, LC 353VE

Illustration of two hand positions on a tool, showing movement and assembly (no text or symbols)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

• Maak de startvergrendeling (1) los.
• Trek de starchendel (2) naar u toe. De startmotor stopt wanneer de motor is gestart.

BEDIENING

Aandrijving

Line drawing of a mechanical device with arrows indicating motion or force direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the motion of the cable (no text or symbols present)

Line drawing of hands using a handheld device to interact with a device (no text or symbols)

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

Algemeen

Diagram showing a lawn mower being installed, with a close-up inset illustrating the installation (no text or symbols present)

Technical line drawing of a mechanical device with gears and a clamped component (no text or symbols)

Technical line drawing of a mechanical lever with a handle and pivot (no text or symbols)

Diagram showing a curved structure with arrows pointing to a flat surface and grass at the base (no text or symbols)

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Attention: projections et ricochets.

Line drawing of a hand holding a tool with a black arrow indicating motion (no text or symbols)

LC 353VI

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Line drawing of two hands holding a tool or device, no text or symbols present

Silencieux

Mechanical diagram showing two configurations of a pulley or linkage mechanism with rotational arrows (no text or symbols)

Three-step diagram showing a rope knot being lifted, with arrows indicating rotational direction (no text or symbols)

Technical line drawing of three views of a plastic housing or enclosure (no text or symbols)

Technical line drawing of a plastic basket and its side view showing internal structure (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and detail view (no text or symbols)

Technical line drawing of a car interior showing a mesh basket and a grid-patterned roof (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of a two-part lawn mower system, showing blade and wheel assembly (no text or labels)

MONTAGE ET RÉGLAGES

Fonction de broyage

Technical line drawing of a lawn mower with a handle and gear mechanism (no text or symbols)

Line drawing of a vehicle's wheel assembly with a hand adjusting the seat (no text or symbols)

Line drawing of a car's front wheel and side seat assembly (no text or symbols)

Mechanical component diagram showing a highlighted connection point (no text or symbols)

Hauteur de coupe

Technical line drawing of a mechanical component with arrows indicating direction (no text or symbols)

Remplissage d'huile

Illustration of two hands performing a manual tool manipulation technique (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

COMMANDE

Entraînement

Diagram of a medical or surgical device with attached tubing and connectors (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the rotation of the cable (no text or symbols present)

Line drawing of hands operating a handheld device with wires (no text or symbols)

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

Généralités

Diagram showing a lawn mower with a close-up view of the device (no text or symbols present)

Nettoyage extérieur

Line drawing of a mechanical device with attached belt and clamped components (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a curved structure with arrows indicating direction, above grass (no text or symbols)

Mechanical gear assembly diagram showing rotational motion with no text or symbols

Technical line drawing of a device housing with an arrow indicating transformation (no text or symbols present)

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

• LC 353VI

Technical line drawing of a mechanical fan or compressor assembly (no text or symbols visible)

Line drawing of a hand holding a medical or surgical instrument (no text or symbols present)

Barra de arranque (LC 353VI)

Silenciador

Two diagrams showing mechanical components with rotational arrows, no text or symbols present

Three-step diagram showing a rope knot being lifted, with arrows indicating motion direction (no text or symbols)

Technical line drawings of three different plastic housing components (pool, side, and top) without any text or symbols.

Technical line drawing of a plastic container with side views (no text or symbols)

Technical line drawing of a mechanical component with an inset close-up showing a detail (no text or symbols)

Technical line drawing of a car interior showing a mesh basket and a grid-patterned roof (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view (no text or symbols)

Technical line drawing of two lawn lawners (no text or symbols present)

MONTAJE Y AJUSTES

Technical line drawing of a lawn mower with a handle and wheel (no text or symbols)

Line drawing of a car interior showing hand positioning and seat area (no text or symbols)

Line drawing of a car's front wheel and side seat assembly (no text or symbols)

Diagram of a vehicle's seat and wheel assembly with a black arrow indicating a specific component (no text or symbols present)

Altura de corte

Mechanical component diagram showing a gear or cam mechanism with directional arrows indicating movement (no text or symbols)

Repostado de aceite

Arranque eléctrico

LC 348VE, LC 353VE

Illustration of two hands performing a manual tool manipulation technique (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with a circular housing and fan (no text or symbols)

FUNCIONAMIENTO

Transmisión

Diagram of a mechanical clamp or connector with arrows indicating direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the motion of the cable (no text or symbols present)

Line drawing of hands using a handheld device to interact with a device (no text or symbols)

Diagram of a car interior showing a seatbelt and overhead cable (no text or labels)

Generalidades

Diagram showing a lawn mower being adjusted for installation, with an inset close-up of the component (no text or symbols present)

Limpieza externa

Technical line drawing of a mechanical device with hoses and a belt drive (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a lever system with arrows indicating direction, no text or symbols present

Mechanical diagram showing a rotating component with arrows indicating motion (no text or symbols)

Technical line drawing of a battery housing with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a hand holding a tool with an arrow indicating movement (no text or symbols)

• LC 353VI

Technical line drawing of an electric vehicle's internal components, showing fan, motor, and cooling unit (no text or labels)

Line drawing of two hands holding a medical instrument (no text or symbols)

Marmitta

Two diagrams showing mechanical components with rotational arrows, no text or symbols present

Three-step diagram showing rope lifting and hooking steps (no text or symbols)

Technical line drawing of three views of a plastic housing or enclosure (no text or symbols)

Technical line drawing of a plastic container with internal compartments and an inset close-up showing internal structure (no text or symbols)

Technical line drawing of a mechanical component with an inset view showing a close-up detail (no text or symbols)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view (no text or symbols)

Technical line drawing of a two-part lawn mower system with handle and blade (no text or symbols)

Technical line drawing of a mechanical assembly with a handle and lever (no text or symbols)

Line drawing of a car's wheel assembly with a handle and seat (no text or symbols)

Line drawing of a car's front wheel assembly with a handle attachment (no text or symbols)

Mechanical component diagram showing a highlighted section with a downward arrow (no text or symbols)

Altezza di taglio

Mechanical component diagram showing a gear and wheel assembly with directional arrows (no text or symbols)

Rabbocco dell'olio

Illustration showing two hand positions of a tool or device, with arrows indicating movement direction (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

FUNZIONAMENTO

Trasmissione

Diagram of a mechanical device with arrows indicating motion or force direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the motion of the cable (no text or symbols present)

Line drawing of hands using a handheld device to interact with a device (no text or symbols present)

Diagram of a mechanical component with a black arrow indicating direction (no text or symbols)

MANUTENZIONE

Generalità

Diagram showing a lawn mower being cleaned with a tool, with an inset close-up of the tool's cable assembly (no text or symbols present)

Pulitura esterna

Line drawing of a mechanical device with hoses and a battery (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a lever mechanism over grass, showing directional arrows (no text or symbols)

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Diagram of a battery pack with an arrow indicating internal structure (no text or symbols)

Line drawing of a hand holding a tool with an arrow indicating direction (no text or symbols)

• LC 353VI

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Rukojeť brzdy motoru

Line drawing of two hands holding a medical device (no text or symbols)

Madlo Start/Stop (LC 353VI)

Tlumič výfuku

Diagram showing two mechanical assembly steps with rotating components (no text or symbols)

Three-step diagram showing a rope knot being lifted, then lifting a cable with a circular motion indicator (no text or symbols)

Montáž sběrače

Technical line drawing of three views of a plastic housing or container (no text or symbols)

Technical line drawing of a plastic container with internal structure and side profile details (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and detail view (no text or symbols)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of two lawn lawners (no text or symbols present)

KOMPLETACE A SEŘÍZENÍ

Funkce mulčování

Technical line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Technical line drawing of a vehicle's front wheel assembly (no text or symbols)

Line drawing of a car's front wheel and side arm, showing structural components without any text or symbols

Line drawing of a vehicle's lower body and seat assembly with a black arrow indicating a specific point (no text or symbols present)

Výška sečení

Mechanical component diagram showing a gear and wheel assembly with directional arrows (no text or symbols)

Plnění oleje

Elektricky start

LC 348VE, LC 353VE

Illustration of two hand positions on a tool, showing movement and force application (no text or symbols)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical device with no visible text or symbols

OBSLUHA

Provoz

Diagram of a medical or surgical device with attached tubing and connectors (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands holding a medical device on a patient's abdomen (no text or symbols)

Motor se vypne tak, že se vypínač nastaví do polohy vypnuto.

Line drawing of a car interior showing a seatbelt and overhead structure (no text or symbols)

Všeobecně

Diagram showing a lawn mower being adjusted for installation, with no text or symbols present.

Line drawing of a mechanical device with gears and a base component (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical knob and a supporting post (no text or symbols)

Diagram showing a curved structure with arrows pointing to a rectangular object on grass (no text or symbols)

Mechanical gear assembly diagram showing rotational motion with no text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Claes Losdal, Development Manager/Garden Products

Budowa kosiarki

Line drawing of a hand holding a tool with an arrow indicating direction (no text or symbols)

• LC 353VI

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Line drawing of two hands holding a medical instrument (no text or symbols)

Dźwignia uruchamiania (LC 353VI)

Tłumik

Mechanical diagram showing two configurations of a pulley or clamp mechanism, with no visible text or symbols.

Three-step diagram showing cable fastening and lifting mechanism (no text or symbols)

Montaż kolektora

Technical line drawing of three views of a plastic housing or enclosure (no text or symbols)

Technical line drawing of a plastic container with internal compartments and side profile details (no text or symbols)

Technical line drawing of a mechanical component with an inset detail showing a close-up view of a corner detail (no text or symbols present)

Technical line drawing of a car interior showing structural details and a side-view detail (no text or symbols)

Technical line drawing of a mechanical component with internal structure and side profile (no text or symbols)

Technical line drawing of a lawn mower and its side view (no text or symbols)

MONTAŻ I REGULACJE

Technical line drawing of a lawn mower with an arrow indicating motion (no text or symbols)

Line drawing of a car interior showing hand positioning and seat area (no text or symbols)

Line drawing of a car's front wheel assembly with a hand adjusting the seat (no text or symbols)

Mechanical component diagram showing a belt drive mechanism with a black arrow indicating force direction (no text or symbols)

Wysokość koszenia

Mechanical component diagram showing a gear and shaft assembly with directional arrows (no text or symbols)

Uzupełnianie oleju

Line drawing of a hand holding a pen or tool, with an arrow pointing to the pen tip (no text or symbols present)

Illustration of a hand holding a plant stem with arrows indicating movement or force (no text or symbols)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a car air conditioning unit with no visible text or symbols

DZIAŁANIE

Naped

Diagram of a medical or surgical device with arrows indicating force or movement (no text or symbols present)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands holding a medical device on a curved surface (no text or symbols)

Diagram of a mechanical component with a black arrow indicating direction (no text or symbols)

Uwagi ogólne

Diagram showing a lawn mower being installed with a tool, alongside a close-up of the motor's cable (no text or symbols present)

Line drawing of a mechanical device with attached belt and clamped components (no text or symbols)

Technical line drawing of a mechanical lever with a handle and pivot (no text or symbols)

Diagram of a lever mechanism over grass, showing directional arrows (no text or symbols)

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Technical line drawing of a device housing with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

• LC 353VI

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Motorfékfogantyú

Line drawing of two hands holding a medical instrument (no text or symbols)

Kipufogódob

Two diagrams showing mechanical components with rotational arrows, no text or symbols present

Three-step diagram showing rope knotting and hanging weights, no text or symbols present

Technical line drawing of three views of a plastic housing or enclosure (no text or symbols)

Technical line drawing of a plastic container with internal compartments and an inset view of its side panel (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of a lawn mower with hand and blade assembly (no text or symbols)

Technical line drawing of a lawn mower with a handle and wheel (no text or symbols)

Technical line drawing of a vehicle wheel assembly (no text or symbols)

Line drawing of a car's front wheel and side arm, showing structural components (no text or symbols)

Line drawing of a vehicle's seat and grip assembly with a black arrow indicating a specific component (no text or symbols present)

Vágási magasság

Mechanical component diagram showing a gear and wheel assembly with directional arrows (no text or symbols)

Feltöltés olajjal

Illustration showing two hand positions on a tool, one with arrows indicating movement or force direction (no text or symbols)

LC 353VI

Technical line drawing of a two-part electronic device housing with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

ÜZEMELTETÉS

Meghajtó

Diagram of a mechanical device with arrows indicating motion or force direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the motion of the cable (no text or symbols present)

Line drawing of hands using a handheld device to interact with a cable or wire (no text or symbols)

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

KARBANTARTÁS

Diagram showing a lawn mower being adjusted for installation, with no text or symbols present.

Külső tisztítás

Line drawing of a manual lawn mower with attached equipment (no text or symbols)

Simple line drawing of a mechanical lever with a handle and pivot (no text or symbols)

Diagram of a lever mechanism over grass, showing directional arrows (no text or symbols)

Mechanical gear assembly diagram showing rotational motion with no text or symbols

Diagram of a device housing with internal components and an arrow indicating assembly (no text or symbols)

SIGURNOSNA OPREMA STROJA

Općenito 240

MONTIRANJE I PODEŠAVANJA

Općenito 241

Ručka 241

Visina rezanja 242

Ulijevanje ulja 242

RUKOVANJE GORIVOM

Općenito 243

Gorivo 243

Punjenje goriva 243

Dijelovi kosilice

SIGURNOSNA OPREMA STROJA

Općenito

Line drawing of a hand holding a tool with an arrow indicating motion (no text or symbols)

• LC 353VI

Ako želite ukloniti akumulator (glavni prekidač), pridržavajte tipke za zaključavanje i povucite u stranu.

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Kočna poluga motora

- Kočnica motora služi za zaustavljanje motora. Motor se zaustavlja otpuštanjem hvatišta na kočnoj poluzi motora.

Line drawing of two hands performing a medical procedure on a patient's arm (no text or symbols present)

Poluga za pokretanje (LC 353VI)

Prigušivač

Mechanical diagram showing two configurations of a pulley or clamp mechanism, with no visible text or symbols.

- Namjestite visinu ručke i čvrsto zategnite kugle.

Three-step diagram showing a rope knot being lifted, rotating around a wheel, and securing a frame (no text or symbols)

Technical line drawings of three different plastic housing components (cave, side, and flat) without any text or symbols.

Technical line drawing of a plastic basket and its side view showing internal structure (no text or symbols)

- Spustite gornje kućište. Rubni pojas mora obavezno biti postavljen s vanjske strane donjeg kućišta.

Technical line drawing of a mechanical component with cross-sectional view and detail detail (no text or symbols)

- Započnite tako da zakvačite kraj metalne izbočine u utorima donjeg kućišta.

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with internal structure and top view (no text or symbols)

- Podignite stražnji štitnik i spustite spremnik za travu.

Technical line drawing of a lawn mower and its side view showing mechanical components (no text or symbols)

MONTIRANJE I PODEŠAVANJA

Malčiranje

Komplet za malčiranje dostupan je kao dodatna oprema kako bi strojevi imali mehanizam za prihvaćanje koji se može koristiti za funkciju malčiranja.

Technical line drawing of a mechanical component with an arrow indicating direction (no text or symbols present)

Line drawing of a vehicle's wheel assembly with a shaded component (no text or symbols)

Line drawing of a car's seat and dashboard assembly (no text or symbols)

Line drawing of a mechanical component with a black arrow indicating a downward force or adjustment (no text or symbols present)

Visina rezanja

Mechanical component diagram showing a gear or cam mechanism with directional arrows indicating movement (no text or symbols)

Ulijevanje ulja

- Prilikom isporuke spremnik za ulje je prazan. Polako ulijte ulje. Vidi uputstva pod rubrikom Održavanje. Motorno ulje treba prvi put promijeniti nakon 5 sati rada.

Općenito

UPOZORENJE! Pokretanje motora u zatvorenom ili loše provjetrenom prostoru može prouzročiti smrt zbog gušenja ili trovanja ugljičnim monoksidom.

Gorivo i pare goriva su visoko zapaljivi te mogu izazvati ozbiljne ozlijede u slučaju inhalacije ili kontakta s kožom. Iz tog razloga pažljivo rukujete gorivom i budite sigurni da postoji odgovarajuća ventilacija.

Električno pokretanje

LC 348VE, LC 353VE

Kosilice LC 348VE i LC 353VE opremljene su s elektropokretačem koji se koristi na sljedeći način.

Line drawing of a hand holding a tool, no text or symbols present

Illustration of a hand holding a plant stem with arrows indicating movement (no text or symbols)

LC 353VI

Stroj ima električno pokretanje putem poluge za pokretanje.

Technical line drawing of a device housing with internal components and an arrow indicating assembly (no text or symbols)

LC 353VI ima inhibitor pokretanja. Nastavite prema sljedećim uputama za pokretanje motora i rotaciju oštrice:

Technical line drawing of a mechanical component with no visible text or symbols

• Otpustite inhibitor pokretanja (1).
• Povucite šipku za pokretanje (2) prema sebi. Motor elektropokretača zaustavit će se nakon pokretanja motora.

RUKOVANJE

Pogon

- Da biste aktivirali pogon na kotačima povucite polugu spojke prema sebi.

Diagram of a medical or surgical device with attached tubing and connectors (no text or labels)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

- Kako biste napeli sajlu i povećali brzinu, vijak za podešavanje okrenite u smjeru suprotnom od kazaljke na satu.

Nemojte previše zatezati sajle. Ako se kosilica počne kretati bez upotrebe ručice spojke, produljite sajlu.

- Kako biste produljili sajlu i smanjili brzinu, vijak za podešavanje okrenite u smjeru kazaljke na satu.

lsključivanje

LB 348V, LC 348V, LC 348VE, LC 353V, LC 353VE, LC353VI

- Zaustavite motor otpuštanjem šipke kočnice motora/šipke za pokretanje. Pogon se također isključuje otpuštanjem šipke kočnice motora/šipke za pokretanje.

VAŽNO!

Kod modela LC 348VE i LC 353VE izvadite ključ.

LC 353VI Obavezno uklonite akumulator dok se stroj ne koristi.

LC353VB

Kružna pila se zaustavlja kada otpustite kočnu polugu.

Line drawing of hands using a handheld device to interact with a device (no text or symbols)

Motor se isključuje okretanjem zaustavnog prekidača u položaj isključenosti.

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

Općenito

UPOZORENJE! Korisnik smije obavljati postupke održavanja i servisiranja opisane isključivo u ovom priručniku. Veće popravke potrebno je prepustiti ovlaštenom serviseru.

Diagram showing a lawn mower being cleaned with a power tool, with an inset close-up of the device (no text or symbols present)

Vanjsko čišćenje

• Četkom uklonite lišće, travu i slične tvari s kosilice.
• nemojte upotrebljavati uređaj za pranje pod velikim pritiskom da biste čistili stroj.
• Nikada nemojte polijevati motor vodom.
• Provjerite da li su naprava za paljenje i uže za paljenje istrošeni ili oštećeni. Očistite proreze za dovod zraka na kućištu naprave za paljenje.
• Prilikom čišćenja područja ispod reznog poklopca, ispraznite spremnik goriva i položite stroj na bočnu stranu tako da prigušivač bude okrenut prema dolje.

Line drawing of a mechanical device with gears and a housing (no text or symbols)

- Uklonite lišće i travu s kućišta zupčanika. Po potrebi kućište očistite vodom. Kod modela LC348Ve i LC353VE obavezno isključite akumulator.

Razina ulja

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a lever system with arrows indicating direction, no text or symbols present

- Stavite nož s podložnom pločicom na nosač noža. Nož treba pravilno centrirati na osovini. Da biste spriječili vibracije postavite nož kosilice tako da se oznaka nosača noža može vidjeti na stranama noža.

- Namjestite podlošku i zategnite svornjak. Svornjak zategnite momentom od 45-60 Nm.

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a hand holding a tool with a circular arrow indicating motion (no text or symbols)

• LC 353VI

Technical line drawing of a mechanical fan or vent assembly with no visible text or symbols

Mootoripiduri hoob

Line drawing of two hands holding a medical instrument (no text or symbols)

Käivitushoob (LC 353VI)

Summuti

Two diagrams showing mechanical linkage mechanisms with rotational arrows, no text or symbols present

Three-step diagram showing rope knotting and lifting mechanism (no text or symbols)

Koguja paigaldamine

Technical line drawing of three views of a plastic housing or enclosure (no text or symbols)

- Haakige pealmine kate alumisel kattel olevatele kinnitustele.

Technical line drawing of a plastic container with internal compartments and an inset view of its internal structure (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and detail view (no text or symbols)

- Esmalt haakige metallserva üks ots alumisel kattel olevatesse avadesse.

Technical line drawing of a car interior showing a mesh basket and a grid-patterned roof (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of a two-step lawn mower system (no text or symbols)

KOKKUPANEK JA REGULEERIMINE

Multšimisfunktsioon

Technical line drawing of a lawn mower with a handle and blade (no text or symbols)

Technical line drawing of a mechanical component or bracket assembly (no text or symbols)

Line drawing of a car's front wheel assembly (no text or symbols)

Diagram of a vehicle's seat and belt assembly with a black arrow indicating a specific component (no text or symbols present)

Niitmiskõrgus

Technical line drawing of a mechanical component with arrows indicating assembly or movement (no text or symbols)

Õli lisamine

Line drawings showing two hand positions on a tool, one with arrows indicating movement or force (no text or symbols)

LC 353VI

Technical line drawing of a two-part electronic device with an arrow indicating transformation or assembly (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

KÄITAMINE

Ajam

Diagram of a medical or surgical device with arrows indicating force or movement (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands using a handheld device to interact with a cable (no text or symbols)

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

HOOLDUS

Üldised näpunäited

Diagram showing a lawn mower being cleaned with a tool, with an inset close-up of the tool (no text or symbols present)

Line drawing of a mechanical device with gears and a housing (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a blade under load with arrows indicating force direction, set against grass (no text or symbols)

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

TÄHTIS! Selle mudeli puhul on aku ohutusseadis. Kasutage alati ainult originaalvaruosi.

Aku laadimine.

Line drawing of a hand holding a tool with an arrow indicating direction (no text or symbols)

• LC 353VI

Technical line drawing of a mechanical fan or compressor assembly (no text or symbols)

Stabdžių svirtis

Line drawing of two hands holding a medical instrument (no text or symbols present)

Paleidimo juosta (LC 353VI)

Duslintuvas

Two diagrams showing mechanical linkage mechanisms with rotational arrows, no text or symbols present

Three-step diagram showing a cable being lifted, rotating around a car wheel (no text or symbols)

Technical line drawing of a three-part mechanical housing or enclosure with internal compartments and mounting brackets (no text or symbols)

Technical line drawing of a mechanical component with two views: top shows a side view of a container with internal structure, bottom shows a close-up of a bracket (no text or symbols)

Technical line drawing of a mechanical component with an inset detail showing a corner detail (no text or symbols)

Technical line drawing of a car interior showing a mesh basket and a grid-patterned roof (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of a two-step lawn mower system with handle and guide (no text or symbols)

Technical line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Technical line drawings of two vehicle components, one showing front view and the other showing rear view (no text or symbols)

Mechanical component diagram showing a highlighted connection point (no text or symbols)

Pjovimo aukštis

Mechanical component diagram showing a gear and wheel assembly with directional arrows (no text or symbols)

Alyvos užpylimas

Elektrinis jjungimas

LC 348VE, LC 353VE

Illustration of two hands performing a manual tool manipulation technique (no text or symbols present)

LC 353VI

Mašinos elektrinio jjungimo funkcija atlieka paleidimo juosta.

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

DARBAS

Pavara

Diagram of a medical or surgical device with arrows indicating force direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands using a tool on a chair (no text or symbols)

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

Bendra informacija

Diagram showing a lawn mower being cleaned with a tool, with an inset close-up of the device (no text or symbols present)

Išorinis valymas

Line drawing of a mechanical device with gears and a base unit (no text or symbols)

Technical line drawing of a mechanical lever with a handle and pivot (no text or symbols)

Diagram of a curved structure with arrows indicating direction, above grass (no text or symbols)

Mechanical gear assembly diagram showing rotational motion with no text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Izslēdziet dzinēju.

Line drawing of a hand holding a tool with a black arrow indicating direction (no text or symbols)

• LC 353VI

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Motora bremžu loks.

Line drawing of two hands holding a medical instrument (no text or symbols)

Palaišanas stienis (LC 353VI)

Trokšna slāpētājs

Mechanical diagram showing two sequential steps of a mechanical assembly with rotating components (no text or symbols)

Three-step diagram showing mechanical assembly steps: rope connection, pulley rotation, and wheel assembly (no text or symbols)

Savācēja montāža

Technical line drawing of a three-part plastic housing assembly (no text or symbols)

Technical line drawing of a mechanical component with two views: top shows internal structure, bottom shows side profile (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and detail view (no text or symbols)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of a lawn mower and its side view (no text or symbols)

MONTĀŽA UN UZSTĀDĪŠANA

Mulčešanas funkcija

Technical line drawing of a mechanical component with no visible text or symbols

Technical line drawings of two vehicle chassis components, showing front and side views (no text or symbols)

Line drawing of a vehicle's lower body and seat assembly with a black arrow indicating a specific component (no text or symbols present)

Plaušanas augstums

Mechanical diagram showing a gear or cam mechanism with directional arrows indicating motion (no text or symbols)

Ellas uzpildišana

Line drawing of a hand holding a tool, no text or symbols present

Illustration of a hand holding a plant stem with arrows indicating movement or force (no text or symbols)

LC 353VI

Technical line drawing of a two-part electronic device with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

IEDARBINĀŠANA

ledarbināšana

Diagram of a mechanical device with arrows indicating motion or force direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands using a handheld device to interact with a cable or cable (no text or symbols)

Diagram of a car interior showing a seatbelt and overhead structure (no text or labels)

Vispārēji

Diagram showing a lawn mower being cleaned with a tool, with an inset close-up of the tool (no text or symbols present)

Ārējā tīrīšana

Technical line drawing of a mechanical device with attached components (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a lever mechanism over grass, showing directional arrows (no text or symbols)

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

• LC 353VI

Technical line drawing of a mechanical fan or compressor assembly (no text or symbols)

Line drawing of two hands performing a medical procedure on a curved tube (no text or symbols)

Zagonska ročica (LC 353VI)

Dušilec

Mechanical diagram showing two configurations of a pulley or clamp mechanism (no text or symbols present)

- Nastavite višino ročaja in zategnite vijak.

Three-step diagram showing rope knotting and lifting mechanism (no text or symbols)

Sestavljanje zbiralnika za travo

Technical line drawing of a three-part plastic housing assembly (no text or symbols)

Technical line drawing of a plastic basket and its side view showing internal components (no text or symbols)

Technical line drawing of a mechanical component with an inset view showing a close-up detail (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view (no text or symbols)

- Kovinski okvir potisnite prek zgornjega in spodnjega pokrova. Kovinski okvir pripnite na spodnji pokrov.

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

• Dvignite zadnji ščitnik in obesite posodo za travo.

Technical line drawing of a two-step lawn mower system with hand placement and tool path (no text or symbols)

MONTAŽA IN REGULIRANJE

Funkcija mulčenja

Technical line drawing of a mechanical component with an arrow indicating upward motion (no text or symbols)

- Čep za mulčenje vtaknite v kanal zbiralnika.

Technical line drawings of two vehicle chassis components, showing front and side views (no text or symbols)

Mechanical component diagram showing a highlighted connection point (no text or symbols)

Višina reza

POZOR! Ne nastavite prenizke višine reza, ker obstaja tveganje, da rezila udarijo ob neenakomerna pobočja.

Mechanical component diagram showing a gear and wheel assembly with directional arrows (no text or labels)

Dolivanje olja

Električni zagon

LC 348VE, LC 353VE

Line drawing of a hand holding a tool, no text or symbols present

Illustration of a hand holding a tool with an arrow indicating direction (no text or symbols present)

LC 353VI

Diagram of a device housing with an arrow indicating a component or connection (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

• Sprostite blokado vžiga (1).
• Zagonsko ročico (2) povlecite proti sebi. Zaganjalnik motorja se zaustavi, ko zaženete motor.

DELOVANJE

Pogon

- Za uporabo pogona na kolesu potegnite vzvod sklopke k sebi.

Diagram of a mechanical clamp or connector with arrows indicating direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the rotation of the cable (no text or symbols present)

Line drawing of a person using a handheld device to interact with another person (no text or symbols present)

Motor ustavite tako, da premaknete stikalo za zaustavitev v položaj stop.

Line drawing of a car interior showing a seatbelt and overhead cable (no text or symbols)

Splošno

Diagram showing a lawn mower being adjusted for installation, with no text or symbols present.

Zunanje čiščenje

Line drawing of a mechanical assembly with gears and a housing (no text or symbols)

- Listje in travo odstranite z ohišja s krtačo. Po potrebi ohišje očistite z vodo. Pri LC348Ve in LC353VE mora biti akumulator odklopljen.

Nivo olja

Technical line drawing of a mechanical lever with a handle and pivot (no text or symbols)

- Odstranite staro rezilo. Zagotovite, da zavora rezila ni poškodovana. Preverite tudi, ali je vijak rezila nepoškodovan in ali motorna gred ni upognjena.

Montaža:

- Rezilo mora biti nameščeno tako, da so nagnjene strani rezila obrnjene navzgor, proti pokrovu.

Diagram of a blade under load with arrows indicating force direction, set on grass (no text or symbols)

- Rezilo vstavite tako, da bo podložka trenja nasproti zavore rezila. Rezilo mora biti pravilno usredinjeno na gredi. Vibracije preprečite tako, da rezilo kosilnice postavite tako, da lahko ob straneh rezila vidite oznako zavore rezila.

- Montirajte podložko in jo pravilno zategnite. Vijak morate priviti z momentom 45–60 Nm.

Mechanical assembly diagram showing a rotating component with no visible text or symbols

• Z roko obrnite rezilo in preverite, ali se prosto vrti.
  • Preizkusno zaženite stroj.

POMEMBNO!

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

POMEMBNO! Baterija pri tem modelu je varnostni sestavni del. Vedno uporabljajte originalne dele.

Napolnite akumulator.

Line drawing of a hand holding a tool with an arrow indicating direction (no text or symbols)

• LC 353VI

Technical line drawing of a mechanical fan or motor assembly with no visible text or symbols

Rukovät motorovej brzdy

- Motorová brzda slúži na zastavenie motora. Ked' povolíte zovretie rukováte motorovej brzdy, motor by sa mal zastavit.

Line drawing of two hands holding a medical instrument (no text or symbols)

Tlmič výfuku

Two diagrams showing mechanical components with rotational arrows, no text or symbols present

Three-step diagram showing a rope being lifted by a hook, with arrows indicating direction of motion (no text or symbols)

Montáž zberača

Technical line drawing of a three-part plastic housing assembly (no text or symbols)

Technical line drawing of a plastic container with internal compartments and a close-up view of its side panel (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and detail view (no text or symbols)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and side profile (no text or symbols)

Technical line drawing of a lawn mower and its side view (no text or symbols)

MONTÁŽ A NASTAVENIA

Funkcia mulčovania

Technical line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Line drawing of a vehicle's wheel assembly with a shaded component (no text or symbols)

Line drawing of a car's seat and dashboard assembly (no text or symbols)

- Zatvorte kryt a ubezpečte sa, že je zaistený mulčovacou zástrčkou.

Line drawing of a mechanical component with a black arrow indicating a downward force or adjustment (no text or symbols present)

Výška rezu

Mechanical component diagram showing a bearing assembly with directional arrows (no text or labels)

Plnenie olejom

Illustration of two hands holding a tool, showing a close-up of the tool being adjusted (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or insertion (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

PREVÁDZKA

Pohon

Diagram of a mechanical clamp or connector with arrows indicating direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the rotation of the cable (no text or symbols present)

Line drawing of hands using a handheld device to interact with a device (no text or symbols)

Diagram of a mechanical component with a black arrow indicating a specific part (no text or symbols present)

Všeobecné

Diagram showing a lawn mower being cleaned with a power tool, with an inset close-up of the device (no text or symbols present)

Vonkajšie čistenie

Line drawing of a mechanical device with gears and a base unit (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram showing a curved structure with arrows pointing to a grassy field below (no text or symbols)

Mechanical gear assembly diagram showing rotational motion with no text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Line drawing of two hands holding a medical instrument (no text or symbols)

Аycпух

Two diagrams showing mechanical linkage or pulley system with rotational arrows, no text or symbols present

Three-step diagram showing rope knotting and hanging mechanism, no text or symbols present

Line drawings of three different plastic housing components (cave, side, and flat) without any text or symbols.

Technical line drawing of a plastic container with internal grating and side profile details (no text or symbols)

Technical line drawing of a mechanical component with an inset detail showing a close-up view of a corner detail (no text or symbols present)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view (no text or symbols)

Technical line drawing of a two-part lawn mower system (no text or symbols)

МОНТИРАНЕ И НАСТРОЙВАНЕ

Функция мулчиране

Technical line drawing of a mechanical assembly with a handle and mounting bracket (no text or symbols)

Line drawing of a car's wheel assembly showing structural components (no text or symbols)

Line drawing of a car's front wheel and side seat assembly (no text or symbols)

Mechanical component diagram showing a highlighted section with a black arrow indicating a downward motion (no text or symbols present)

Височина на рязане

Mechanical component diagram showing a gear assembly with directional arrows indicating movement (no text or symbols)

Зареждане с масло

Електрическо пускане LC 348VE, LC 353VE

Line drawing of a hand holding a tool or device with an arrow pointing to the component (no text or symbols present)

Line drawing of a hand holding a tool with arrows indicating movement (no text or symbols)

LC 353VI

Technical line drawing of a battery housing with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

Задвижване

Diagram of a cable or connector with directional arrows indicating movement (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands using a handheld device to interact with a device (no text or symbols)

Line drawing of a car interior showing a seatbelt and overhead structure (no text or symbols)

Основни принципи

Diagram showing a lawn mower being installed with a tool, alongside a close-up of the installation detail (no text or symbols present)

Външно почистване

Line drawing of a vehicle's lower body and suspension system (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a blade under an arch over grass, with arrows indicating direction (no text or symbols)

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Technical line drawing of a plastic housing component with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical fan or compressor assembly (no text or symbols)

Line drawing of two hands holding a medical instrument (no text or symbols)

Глушитель

Two diagrams showing mechanical assembly steps with arrows indicating rotation (no text or symbols)

Three-step diagram showing cable fastening and lifting mechanism (no text or symbols)

Technical line drawings of three different plastic housing components (cave, side, and flat) without any text or symbols.

Technical line drawing of a plastic container with internal structure and side profile details (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and detail view (no text or symbols)

Technical line drawing of a mechanical component with cross-section and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view (no text or symbols)

Technical line drawing of a lawn mower and its side view (no text or symbols)

Мульчирование

Technical line drawing of a mechanical assembly with no visible text or symbols

Technical line drawings of a vehicle's seat assembly and steering wheel (no text or symbols)

Mechanical assembly diagram showing a keyway with a downward arrow indicating force or movement (no text or symbols present)

Высота стрижки

Mechanical component diagram showing a gear and wheel assembly with directional arrows (no text or symbols)

Заливание масла

Line drawing of a hand holding a wrist with a finger, no text or symbols present

Illustration of hands holding a tool or device with an arrow indicating direction (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

ЭКСПЛУАТАЦИЯ

Diagram of a mechanical clamp or connector with arrows indicating direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of hands using a handheld device to interact with a device (no text or symbols)

Line drawing of a car seatbelt with a belt buckle (no text or symbols)

Общие сведения

Diagram showing a lawn mower being installed with a tool, alongside a close-up of the installation detail (no text or symbols present)

Внешняя очистка

Line drawing of a vehicle's wheel assembly with attached belt switch (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a blade under an arch over grass, with arrows indicating direction (no text or symbols)

Mechanical gear assembly diagram showing rotational motion with no text or symbols

Diagram of two electronic devices with internal components, one showing a pin and arrow indicating assembly (no text or symbols)

Line drawing of a hand holding a tool with a mechanical component, no text or symbols present

LC 353VI

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Line drawing of two hands holding a medical instrument (no text or symbols)

Глушник

Mechanical diagram showing two sequential steps of a mechanical assembly with rotating components (no text or symbols)

Three-step diagram showing a rope knot being lifted, then lifting a car wheel (no text or symbols)

Technical line drawings of three different plastic housing components (cave, side, and flat) without any text or symbols.

Technical line drawing of a mechanical component with internal structure and side view (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view and detail detail (no text or symbols)

Technical line drawing of a mechanical component with a meshed basket and grid-patterned base (no text or symbols)

Technical line drawing of a mechanical component with a meshed base and side view (no text or symbols)

Technical line drawing of two lawn lawners (no text or symbols present)

Technical line drawing of a mechanical component with an arrow indicating upward motion (no text or symbols present)

Line drawing of a vehicle chassis with wheels and structural components (no text or symbols)

Diagram of a car's seat assembly with hand and wheel (no text or labels)

Mechanical assembly diagram showing a keyway with a downward arrow indicating motion (no text or symbols present)

Висота різання

Mechanical component diagram showing a gear or cam mechanism with directional arrows indicating movement (no text or symbols)

Заливання мастила

Line drawing of a hand holding a tool or device, no text or symbols present

Illustration of a hand holding a tool with arrows indicating movement or force (no text or symbols)

LC 353VI

Technical line drawing of a mechanical component with an arrow indicating assembly or insertion (no text or symbols present)

Technical line drawing of a mechanical component with no visible text or symbols

Запуск

Diagram of a medical or surgical device with arrows indicating force direction (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or labels present)

Line drawing of a hand holding a medical device with tubing (no text or symbols)

Line drawing of a car interior showing a seatbelt and overhead cable (no text or symbols)

Загальне

Line drawing of a lawn mower with attached tool and wiring, shown in two views: one showing cable installation and another with a flat blade (no text or symbols)

Зовнішнў очищення

Line drawing of a mechanical device with gears and a belt, no text or symbols present

Technical line drawing of a mechanical bracket with a handle and mounting base (no text or symbols)

Diagram of a blade under an arch with arrows indicating direction, set against grass (no text or symbols)

Mechanical gear assembly diagram showing rotational motion with no text or symbols

Technical line drawing of a mechanical component with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of hands using a tool to adjust or install a mechanical component (no text or symbols present)

LC 353VI

Technical line drawing of a mechanical fan or compressor assembly with no visible text or symbols

Line drawing of two hands holding a tool or device (no text or symbols present)

Σιγαστήρας

Two diagrams showing mechanical components with rotational arrows, no text or symbols present

Three-step diagram showing a rope knot being lifted, with arrows indicating rotational direction (no text or symbols)

Line drawings of three different plastic containers or compartments, showing front, side, and top views (no text or symbols)

Technical line drawing of a mechanical component with internal structure and external assembly (no text or symbols)

Technical line drawing of a mechanical component with an inset close-up showing a detail (no text or symbols)

Technical line drawing of a car interior showing front and side views (no text or symbols)

Technical line drawing of a mechanical component with cross-sectional view (no text or symbols)

Technical line drawing of a two-step lawn mower system with hand placement and valve mechanism (no text or labels)

Technical line drawing of a mechanical assembly with no visible text or symbols

Line drawing of a vehicle's seat assembly (no text or symbols)

Diagram of a car's seat assembly with hand holding the wheel (no text or labels)

Mechanical component diagram showing a highlighted connection point (no text or symbols)

'Υψος κοπής

Mechanical component diagram showing a belt switch and gear assembly (no text or symbols)

Γέμισμα λαδιού

Ηλεκτρική εκκίνηση

LC 348VE, LC 353VE

Line drawing of a hand holding a tool, no text or symbols present

LC 353VI

Technical line drawing of a mechanical housing component with an arrow indicating assembly or transformation (no text or symbols present)

Technical diagram of a mechanical component with no visible text or symbols

ΛΗΙΤΟΥΡΓΙΑ

Σκανδάλη γκαζιού

Diagram of a medical or surgical device with arrows indicating force or movement (no text or symbols)

Diagram showing a cable being inserted into a connector, with an inset illustrating the cable's rotation (no text or symbols present)

Line drawing of a medical procedure with hands holding a device (no text or symbols)

Line drawing of a mechanical component with a black arrow indicating direction (no text or symbols)

Γηνικά

Diagram showing a lawn mower being installed with a tool, alongside a close-up of the installation detail (no text or symbols present)

Line drawing of a vehicle's steering wheel and attached gear assembly (no text or symbols)

Technical line drawing of a mechanical bracket with a cylindrical component and a supporting post (no text or symbols)

Diagram of a curved structure with arrows indicating direction, above grass (no text or symbols)

Mechanical assembly diagram showing a rotating component with no visible text or symbols

Diagram of a battery pack with an arrow indicating the internal structure (no text or symbols present)