KTL13 - Kettle PROLINE - Free user manual and instructions

Product type	Electric kettle
Brand	Proline
Model	KTL13
Power supply	220-240 V~ 50/60 Hz, 1850-2200 W
Capacity	Approximately 1.7 L
Body material	Plastic and stainless steel
Color	Not specified
Cable length	Not specified
Automatic shut-off function	Yes
Overheat protection	Yes (dry heating protection device)
Power indicator light	Yes
360° swivel base	Not specified
Removable anti-limescale filter	Yes, in the spout
Lid opening	By unlock button
Recommended use	Only for heating water
Care and cleaning	Wipe with a damp cloth; do not immerse
Descaling	Regularly with specific descaling product
Child safety	Use is prohibited for children under 8 without supervision
Repairability	Power cord replaceable by a qualified professional
Warranty	Not specified

Frequently Asked Questions - KTL13 PROLINE

How to descale the Proline KTL13 kettle?

Use a specific descaling product suitable for kettles. Follow the product instructions, then rinse thoroughly with clean water. Regular descaling is recommended to maintain performance.

What to do if the kettle does not turn on?

Check that the kettle is properly placed on its base and that the base is plugged in. If it still does not heat, make sure the on/off button is pressed. If the problem persists, contact customer service.

Can I heat something other than water in the kettle?

No, this kettle is designed only to heat water. Never use milk, coffee, or other liquids, as this could damage the appliance and pose a burn risk.

What is the maximum water level?

Never fill the kettle beyond the MAX mark indicated inside. Overfilling may cause boiling water to be ejected.

How to clean the Proline KTL13 kettle?

Unplug and let cool. Wipe the exterior and base with a damp cloth, then dry. Never immerse the kettle or base. The removable filter can be washed under the tap.

The kettle stops before the water boils, what to do?

This may be due to excess limescale. Descale the appliance. If the problem persists, check that the lid is properly closed and the filter is in place.

The lid unlock button does not work, what should I do?

Make sure to press the button for a long time. If the lid remains stuck, do not force it. Contact a qualified professional for repair.

Can I use the kettle without the filter?

No, the kettle must not be used without the filter in place. The filter prevents limescale residues from getting into your drink.

How to proceed at first use?

Boil water twice, then discard it. This removes dust and manufacturing residues. Fill with cold water, boil, and empty.

What to do if the kettle heats empty?

It automatically turns off thanks to the dry heating protection device. Let it cool, fill with cold water, and reuse normally.

USER MANUAL KTL13 PROLINE

This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non-domestic use or in a commercial environment.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of

reach of children aged less than 8 years.

Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
For the details on how to clean surfaces in contact with food and descaling please see section "Cleaning and descaling" on pages 5. w
If the kettle is overfilled, boiling water may be ejected.
WARNING: Position the lid so that steam is directed away from the handle.

WARNING6 Do not remove the lid while the water is boiling.
The kettle is only to be used with the stand provided.
The appliance must not be immersed.
©AUTION6 Insure that the kettle is switched off before removing it from its stand.
WARNING6 Risks of injuries if you don't use this appliance correctly.
The heating element surface is subject to residual heat after use.
The surfaces are liable to get hot during use.

W

IMPORTANTwSAFETYwINSTRUCTIONSwww

• Place the appliance on a stable flat surface before use.
• Be careful when opening the lid immediately after the water has boiled, the steam coming out of the kettle is very hot constituting a risk of scalding.
• Do not use the kettle to heat anything other than water. Never fill the kettle beyond the maximum level indication.
• Make sure the bottom of the kettle and the power base are dry before placing the kettle onto the power base.

W

PARTS

OPERATION

Before first use, it is recommended to operate the kettle for 2 to 3 times following the instructions below. This will remove any dust or residues remaining from the manufacturing process.

1. Remove kettle from power base.

2. Fill kettle with desired amount of cold water through the spout or the open lid.

3. Press and hold the lid release button to open the lid.

4. Do not overfill the kettle by exceeding the MAX level.

5. Close the lid by pressing it down until it clicks into place.

6. Place the kettle on the power base and insert the plug into the mains socket.

7. Press the power switch. The water is being heated.

The power indicator light will illuminate.

1. The kettle will switch off automatically when the water boils.

The power indicator light will go out.
- You can stop the boiling process by setting the power switch to "O".

1. Lift the kettle from the power base and then slowly pour the boiling water.

NOTE: Use the kettle only when the lid is closed and the filter is in place.

Cut-out for boil-dry protection

If you operate the kettle without water, the kettle will stop heating and automatically switch off.

If this occurs, allow the kettle to cool before filling with cold water and re-boiling.

W

W

W

CLEANINGwANDwDESCALINGw

Always unplug the appliance from the mains socket and allow it to cool down before cleaning.

Clean the outside of the kettle and the power base using a slightly damp cloth. Dry thoroughly.

Remove the mesh filter from the spout. Clean it under running water and then replace it.

Do not use abrasive or chemical cleaning agent.

Never immerse the kettle and the power base in water.

Regularly descale the kettle using a specific descaler.

Wipe the inside of the kettle with a clean cloth.

SPECIFICATIONSwww

Ratings: 220-240V~ 50/60 Hz 1850-2200 W

We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development.

Darty Plc © UK: EC1N 6TE 23 / 07 / 2014

ATTENTIONwww

MISES EN GARDE IMPORTANTES: