VL 1130 CB - Fan CLATRONIC - Free user manual and instructions

USER MANUAL VL 1130 CB CLATRONIC

White BOMANN® electric fan with four blades and mesh grille (no text or symbols on fan body)

Overview of the components ...... Page 3

Instruction Manual Page 20

Technical Data...... Page 21

Disposal Page 22

JEZYK POLSKI

Spis treś ci

Technical diagram of a mechanical device with numbered parts for identification

Bedienungsanleitung

D-47906 Kempen/Germany

Entsorgung

Thank you for choosing our product. We hope you enjoy using the appliance.

General Safety Instructions

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.
• Do not operate the machine without supervision. If you leave the room you should always turn the device off. Remove the plug from the socket.
• The device and the mains lead have to be checked regularly for signs of damage. If damage is found the device must not be used.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
• Use only original spare parts.
• Pay careful attention to the following "Special Safety Instructions".

Children and Frail Individuals

- In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING!

Caution! Do not allow small children to play with the foil as there is a danger of suffocation!

• This device is not intended to be used by individuals (including children) who have restricted physical, sensory or mental abilities and/or insufficient knowledge and/or experience, unless they are supervised by an individual who is responsible for their safety or have received instructions on how to use the device.
• Children should be supervised at all times in order to ensure that they do not play with the device.

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

WARNING:

This warns you of dangers to your health and indicates possible injury risks.

CAUTION:

This refers to possible hazards to the machine or other objects.

i NOTE: This highlights tips and information.

Special safety instructions

• Never stick fingers or other objects through the protection grid!
• Watch out for long hair! It can be caught in the fan owing to the air turbulence!
• Use the appliance only with the protection grids on!
  • The appliance must be assembled completely before use!
• Select a stable base to avoid the tipping of the fan during use!
• Do not place the device immediately next to stoves or other sources of heat.

Overview of the components

1 Fastening screw
2 Propeller
3 Fastening nut
4 Motor shaft
5 Motor
6 Adjustment knob for oscillation
7 Switch housing
8 Operating mode switch
9 Base
10 Rear protection grid
11 Hook
12 Attachment ring for rear protection grid
13 Front protection grid

Not shown: crosshead screw

Unpacking the Device

• Remove the device from its packaging.
• Remove all of the packaging material such as foils, filling material, cable holders and cardboard packaging.
• Check the scope of delivery.

i NOTE:

There may still be dust or production residues on the surface of the device. We recommend that you quickly wipe off the housing with a damp cloth.

Assembly instructions

The device must be completely assembled before use! While reading the text it is advisable to refer to the „Overview of the Components“.

1. Place the stand tube (7) in the base (9). It must be heard to click into place. Attach it on the bottom with the crosshead screw (Not shown).
2. Unscrew the mounting ring (12) in an anticlockwise direction. Keep it ready to hand.
3. Position the rear protection grid (10) in place in accordance with the recesses.

i NOTE:

Please ensure that the carrying handle is facing upwards.

1. Turn the attachment ring (12) for the rear protection grid (10) slightly in a clockwise direction.
2. Attach the propeller (2) to the motor shaft (4) and press it firmly into place.
3. Remove the preassembled fastening screw (1) and nut (3) from the wire mesh guard. Keep it ready to hand.
4. Insert the front wire mesh guard (13) into the hook (11).

i NOTE:

Ensure that the holes for the attachment screw in the front and rear protective grille are aligned one above the other.

1. Secure the wire mesh guard with the fastening screw (1) and nut (3).

2. Close the attachment hooks.

Position

The ideal position is a non-slip, flat surface.

Putting into Service

Electrical Connection

1. Before inserting the plug into the socket. Make sure that the mains voltage to be used matches that of the device. You can find this information on the nameplate.
2. Connect the device to a duly installed protective contact socket.

Use

Basic Settings

Set the blower inclination angle before starting the device. You can adjust the inclination angle by tipping the blower casing with both hands.

CAUTION:

The inclination angle amounts to approx. 15^ .

Operation

Use the pushbutton switches on the front to select the speed:

• 2 fast
• 1 slow
• 0 off

Shift to „0“ to switch off the device.

Fan Setting

For this you have two possibilities:

Fixed

• Turn the device off.
  • Pull out the adjustment knob.
• Hold the fan by the protective cage and turn it in the desired direction.

Oscillating

• Press in the adjustment knob.
• The device swivels automatically within a range of approximately 45^ .
• Pull the adjustment knob in order to switch the function off.

Cleaning

WARNING:

• Always remove the mains plug before cleaning the device.
- If you need to remove the safety guard: Always switch the device off and remove the mains plug.
- Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise this might result in an electric shock or fire.

CAUTION:

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

• Clean the outside of the device with a dry cloth without any additives.

• If the device is very dirty wet a cloth with water and then wipe the device dry once you have finished.

Noise development

The workplace-related emission value is less than 70 dB(A).

Technical Data

Model: VL 1130 CB

Power supply: 220-240 V, 50 Hz

Power consumption: 30 W

Protection class:....II

Net weight: 1,45 kg

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

Disposal

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health.

This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.

Information concerning where the equipment can be disposed of can be obtained from your local authority.

Instrukcja obsługi