kMix BL380 - Blender KENWOOD - Free user manual and instructions

USER MANUAL kMix BL380 KENWOOD

before using your Kenwood

ead these instructions carefully and retain for future reference.

emove all packaging and any

Wash the parts: see ‘care and cleaning’. safety

Switch off and unplug:

before fitting or removing parts;

Always unplug the appliance before putting your hands or utensils in the goblet.

Always take care when handling the blade assembly and avoid touching the cutting edge of the blades when cleaning.

Only operate the blender with the lid in place.

Only use the goblet with the blade assembly supplied.

Never let the power unit, cord or plug get wet.

Never use a damaged appliance. Get it checked or repaired: see ‘service and customer care’.

Never use an unauthorised attachment.

Liquids should be allowed to cool to room temperature before blending.

Never leave the appliance unattended when it is operating.

When removing the blender or mill from the power unit:

wait until the blades have completely stopped;

don’t accidentally unscrew the goblet or mill jar from the blade assembly.

Never blend more than the maximum capacity stated in the recommended speed chart.

nd mills, do not run for longer than 60 seconds.

Smoothie recipes - never blend frozen ingredients that have formed a solid mass during freezing, break it up before adding to the goblet.

Don’t use the blender as a storage container. Keep it empty before and after use.

Always use the blender on a secure, dry level surface.

Never place this appliance on or near a hot gas or electric burner or where it could touch a heated appliance.

Misuse of your blender can result in injury.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.before plugging in

ake sure your electricity supply is

he same as the one shown on the underside of the appliance.

This appliance conforms to EC

irective 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food. key blender filler cap locking lid goblet blender sealing ring blender blade unit power unit speed + pulse control cord storage multi mill (if supplied) blender sealing ring blender blade assembly multi mill jar grinding mill (if supplied) mill jar grinding mill blade assembly grating mill (if supplied) mill jar grating mill blade assembly to use your blender Use your blender for soups, drinks, pâtés, mayonnaise, breadcrumbs, biscuit crumbs, chopping nuts and crushing ice. 1 Fit the blender sealing ring into the blender blade unit - ensuring the seal is located correctly in the grooved area.

Leaking will occur if the seal is damaged or incorrectly fitted. 2 Screw the blade assembly onto the

ssembly is fully tightened

Refer to the graphics on the underside of

he blade unit as follows:

unlocked position - locked position 3 Put your ingredients into the goblet. 4 Put the filler cap in the lid. 5 Fit the lid to the goblet and turn clockwise to lock. 6 Place the blender onto the power unit with the handle situated to the right hand side and lock by turning clockwise until you hear a “click”

The appliance won’t work if the blender is incorrectly fitted. 7 Select a speed (refer to the recommended speed chart). blender hints

To blend dry ingredients - cut into pieces, remove the filler cap, then with the machine running, drop the pieces down one by one. Keep your hand over the opening. For best results empty regularly.

The processing of spices is not recommended as they may damage the plastic parts.

When making mayonnaise, put all the ingredients, except the oil, into the blender. Remove the filler cap. Then, with the appliance running, add the oil slowly through the hole in the lid.

Thick mixtures, e.g. pâtés and dips, may need scraping down. If the mixture is difficult to process, add more liquid. 32to use your grinding mill (if supplied) Suitable for grinding spices, coffee beans and processing ginger, garlic and chillies. 1 Place your ingredients into the blade assembly

2 Fit the jar and turn anti-clockwise to lock

3 Place the mill onto the power unit and lock by turning clockwise until you hear a “click”

4 Select a speed or use the pulse (P) control. to use your grating mill (if supplied) Suitable for grating parmesan cheese, nutmeg, coconut and dried fruit. 1 Place your ingredients into the blade assembly

2 Fit the jar and turn anti-clockwise to lock

3 Place the mill onto the power unit and lock by turning clockwise until you hear a “click”

4 Select a speed or use the pulse (P) control.

to use your multi mill (if supplied) Use your multi mill for milling herbs,

uts, coffee beans and purees.

Put your ingredients into the jar . Fill it no more than half full. 2 Fit the blender sealing ring into the blender blade unit - ensuring the seal is located correctly in the grooved area.

Ensure that the seal is fitted

pside down. Lower it into the jar, blades down .

urn anti-clockwise to lock.

Place the mill onto the power unit and lock by turning clockwise until you hear a “click”

blender recommended speed chart speed usage/food items max. quantity 1 Frothing milk 800 ml Light mixes e.g. batters, milkshakes, scrambled egg 800 ml 2 Soups & drinks 1.2 litres Thicker mixes e.g. pâtés Mayonnaise 3 eggs + 450ml oil Smoothie drinks Place the fresh fruit and liquid ingredients in 800ml first (includes yoghurt, milk and fruit juices) liquid Then add ice or frozen ingredients (includes frozen fruit, ice or ice cream) Operates the motor in a start/stop action. (P) The pulse will operate for as long as it is held in – pulse position. Ice crushing - operate in short bursts until 6 cubes crushed to the desired consistency.5

ill recommended speed chart

hen clean and dry Nuts Multi or Grinding 50g 2 10 – 15 secs Coffee Beans Multi or Grinding 50g 2 30 secs Baby Foods & Purees Multi 50g 2 30 secs Spices – such as black Grinding 50g 2 30 – 60 secs peppercorns, cardamom seeds, cumin seeds, coriander seeds, fennel seeds, whole cloves etc. Chillies Grinding 30g 2 10 secs Fresh Root Ginger Grinding 30g 2 10 secs Garlic Grinding 4 cloves 2 10 secs Parmesan Cheese – cut Grating 60g 2 10 secs into 1cm cubes Dried Fruit Grating 50g 2 10 secs Coconut Grating 50g 2 20 secs Nutmeg Grating 2240 secs hints

For optimum performance when processing spices we recommend that you do not process more than 50g at a time in the mill.

Whole spices retain their flavour for a much longer time than ground spices so it is best to grind a small quantity fresh at a time to retain the flavour.

To release the maximum flavour and essential oils whole spices are best roasted prior to milling. care and cleaning

Always switch off, unplug and dismantle before cleaning.

Empty the goblet before unscrewing it from the blade unit.

Do not place any parts in the dishwasher. power unit

Wipe with a damp cloth, then dry.

Don’t immerse the power unit in water.

Store excess cord in the storage area at the back of the power unit

blade assemblies blender and multi mill

Remove the blade unit from the goblet or mill by turning to the unlock position to release. grinding and grating mills

Remove the blade unit from the jar by turning in a clockwise direction.

ash the sealing ring.

ater, then rinse thoroughly under

he tap. Don’t immerse the blade unit in water. 3 Leave to dry upside down. other parts Wash by hand, then dry. service and customer care

If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. If you need help with:

servicing or repairs Contact the shop where you bought your appliance.

Designed and engineered by Kenwood in the UK.

2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin. 6voordat u uw Kenwood-

PRODUIT CONFORMÉMENT AUX

PRODUKTET I SAMSVAR MED

NB FQJUVDX>NFUBJ THMBNUJK@