CB 741 - Iron BOMANN - Free user manual and instructions

Product type	Iron
Brand	Bomann
Model	CB 741
Rated power	2000 W
Supply voltage	230 V ~ 50 Hz
Water tank capacity	300 ml
Soleplate	Stainless steel
Ironing functions	Dry ironing, steam ironing, steam shot, vertical steam, spray
Temperature adjustment	Adjustable thermostat with indicator light
Steam adjustment	Adjustable steam control
Self-cleaning function	Yes
Power cord length	Approx. 2 m
Weight	Approx. 1.1 kg
Warranty	24 months
Noise level	Quiet
Maintenance	Clean the soleplate with a damp cloth; use soft tap water or distilled water
Safety	Automatic shut-off not specified – unplug after use; rear base for storage

Frequently Asked Questions - CB 741 BOMANN

How to fill the water tank of the Bomann CB 741 iron?

Unplug the iron before filling. Open the cap of the filling opening (6) and pour pure water (up to hardness 2) or distilled water up to the MAX mark. Use a measuring cup to avoid spills.

What water to use for the Bomann CB 741 iron?

Use soft tap water (hardness up to 2) or distilled water if your water is hard. Do not use scented or demineralized water.

How to adjust the ironing temperature?

Turn the thermostat (1) to the desired setting: one dot for synthetic/silk, two dots for wool, three dots for cotton/linen. The indicator light turns off when the temperature is reached.

How to activate the steam function?

Set the temperature to a high setting (cotton/linen). Use the steam control (5) to adjust the steam flow. For an extra steam burst, press the button (4).

Can the Bomann CB 741 iron be used vertically for steam?

Yes, you can use the steam shot button (4) in a vertical position to dewrinkle hanging clothes. Make sure the water tank has water and the temperature is high.

How to clean and descale the Bomann CB 741 iron?

Use the self-cleaning function: fill the tank halfway, heat to max temperature, unplug, hold horizontally over a sink, set the steam control (5) to self-clean position and shake. Rinse and iron a clean cloth. Clean the soleplate with a damp cloth.

Why is the iron not producing steam?

Check that the water tank is filled, the temperature is high enough (cotton/linen setting), and the steam control is not at 0. If the problem persists, run a self-cleaning cycle.

How to store the Bomann CB 741 iron after use?

Unplug the iron and empty the water tank. Turn the steam control to the dry position. Let it cool completely before storing on its rear base, coil the cord without bending.

What to do if the iron's soleplate is sticky or burned?

Clean the soleplate with a damp cloth and a little white vinegar or baking soda. Then iron a clean cloth to remove residues. Avoid using abrasive products.

Does the Bomann CB 741 iron have an automatic shut-off?

The manual does not mention an automatic shut-off function. Therefore, it is crucial to unplug the iron after each use and never leave it unattended.

USER MANUAL CB 741 BOMANN

White steam iron with visible branding and printed text, no other signage or symbols present.

CB 741

CE

BOMANN®

Inhalt

Inhoud • Sommaire • Indice • Índice • Indice • Inhold

Contents • Spis treści • Obsah • Tartalom • Содержание

Zelfreiniging (Self-Clean

Autonettoyant (Self-Clean 📄)

Autolimpieza (Self-Clean

Autolimpeza (Self-Clean

Autopulizia (Self-Clean)

Selvrensing (Self-Clean)

General Safety Instructions

GB

- Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing.

- The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. Do not put it in water.

- When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.

- Do not operate the machine without supervision. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).

- To protect children from the dangers posed by electrical appliances, make sure that the cable is hanging low and that children do not have access to the appliance.

- Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.

- Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.

- Use only original spare parts.

- Pay careful attention to the following "Special Safety Instructions".

Special Safety Instructions

- WARNING! The ironing base becomes hot very quickly and takes a long time to cool down. Please do not touch it.

- When the iron is not in use it should be placed on its stand.

- Before filling the water tank remove the mains lead. Please do not fill the water tank higher than the MAX mark.

Numbering of the Controls

1 Continuously adjustable 5 Continuously adjustable steam temperature regulator volume regulator (removable)

2 Control lamp 6 Filler opening for the water tank

3 Spray button 7 Spray nozzle

4 Steam jet button 8 Transparent water container

GB

First Use of the Machine

• Clean the ironing base with a slightly damp cloth.
• Fill the water tank through the filler aperture with pure water (up to degree of hardness 2). If the tap water is harder please use distilled water. Please use a filling container.

Using the Machine

NOTE: Only clothes should to be ironed with this machine.

Ironing without Steam ( )

1. Place the iron on its stand
2. Electrical connection

Make sure that the iron voltage (see name plate) and the line voltage match.

1. Sort out the garments according to their ironing temperatures. Start with the lower temperatures. It is set with the thermostat (1):

• Synthetics, silk (low temperature)
- Wool (medium temperature)
••• Cotton, linen (high temperature)

1. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.

2. The control lamp (2) lights up. As soon as it shuts off, the set temperature is reached. Now you can start to iron.

3. Always pull the plug out of the socket after using the iron.

Steam Ironing ( )

For this a high temperature is needed (cotton, linen). The quantity of steam can be regulated using the steam quantity regulator (5). Extra steam can be added with the steam jet function (4).

When ironing at low temperatures please ensure that you reduce the amount of steam.

Vertical Steam

This can be used to produce a jet of steam in a vertical direction.

Self-Cleaning (Self-Clean)

1. Half fill the water tank with water.
2. Heat the machine up to its maximum temperature. After the control lamp goes off remove the machine from the mains supply.
3. Now hold the machine horizontally above a sink, turn the steam quantity control (5) to the self-cleaning symbol and rock it to and fro until the tank is empty. Then turn the control back to "0".
4. Place the machine back on its stand and heat it up again. To clean the base now iron over a clean cotton cloth.

Spray Function

In order to moisten a section to be ironed press the spray button (3).

Cleaning and Storage

• Always remove the mains lead before cleaning!
- Clean the casing with a slightly damp cloth.
- Clean the iron with a slightly humid cloth.
- After use, always turn the steam quantity regulator to the " " position in order to prevent the contents of the tank from leaking out.

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!

Proof of the guarantee is provided by the proof of purchase. Without proof of purchase no free replacement or repair will be carried out.

If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt.

*) Damage to accessories does not mean automatic free replacement of the whole machine. In such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge.

Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!

The guarantee lapses in case of unauthorized tampering.

After the expiry of the guarantee

After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs.

PL

Samoczynne oczyszczanie (Self-Clean 📄)