CB 1275 - Fondue, raclette and wok appliance BOMANN - Free user manual and instructions

USER MANUAL CB 1275 BOMANN

General Safety Instructions

• Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. Do not put it in water.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.
• Never leave the appliance unsupervised. To protect children from the dangers posed by electrical appliances, make sure that the cable is hanging low and that children do not have access to the appliance.
• Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
• Use only original spare parts.
• Pay careful attention to the following "Special Safety Instructions".

Special safety information concerning this unit

• Keep the unit at a safe distance from easily inflammable objects such as furniture, curtains, etc.!.
• Place the unit on a flat and heat-resistant surface.
• Allow the unit to cool down before you put it away.
• Never let any water get into the fat
• Only hold the handles or the knobs. The unit gets very hot.

Set-up for use

Non-stick coating Grease the pans and the cooking plates slightly. Insert the pans in the relevant cavities in the bottom plate.
- Make the appliance work for about 5 minutes without any food in it to remove the protective coating (see Using the Appliance). A small amount of smoke is normal. Please ensure that there is adequate ventilation.
- Clean the pans and the baking plate in a rinsing bath once they have cooled down. Your new unit is now ready for operation.

Using the unit

1. Cut all the ingredients into small pieces or slices.
2. Lightly grease the baking plate.
3. Connect the appliance to a duly installed 230V/50Hz socket with earthing protection.
4. Turn on the machine by moving the regulator clockwise to the desired position. If necessary, start on a low setting.
5. Choose the food to be grilled on the cooking plate. In the pans you can put for example mushrooms or small slices of bread with cheese to cook. To avoid damaging the non-stick coating, remove the food with a wood spatula.
6. After use switch the On/Off switch to position 0 . Leave the appliance to cool and clean as described in "Cleaning".

Warming function:

Turn the temperature regulator to the lowest setting. The roasting plate now serves as a hot plate.

Cleaning

• Always pull the plug out of the mains socket and wait until the unit has cooled down before cleaning the unit.
• Clean the pans and baking plate in a rinsing bath in the usual way.
• Do not use sharp objects to clean the appliance. Otherwise, the non-stick coating may be damaged.
• Use a slightly damp cloth to clean the unit.

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!

Proof of the guarantee is provided by the proof of purchase. Without proof of purchase no free replacement or repair will be carried out.

GB

If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt.

*) Damage to accessories does not mean automatic free replacement of the whole machine. In such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge.

Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!

The guarantee lapses in case of unauthorized tampering.

After the expiry of the guarantee

After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs.

TapaHTnA TepaTeTc npN BCKpbITn N3dEJIy NOCTOpOHHIMN JIuCaMn.

Pocne rapaHTn

IocJe OKOHaHnIcPoka rapaHTn, pemOHr n3deJn npOn3BODITc 3a ONIaTy, COOTBeTCTByIOUIMM MaCTepCKmN IIN nyHKTaMn CepBnCHOrO O6CnyXnBaHnI.

Technische Daten

Modell: CB 12