282893 - Fridge PRINCESS - Free user manual and instructions

USER MANUAL 282893 PRINCESS

Uw 282893/282895 Princess koelkast is

apparaat is ondergedompeld in water of

de netstekker uit het stopcontact. Gebruik

apparaat is ondergedompeld in water of

in hotels, motels, bed and breakfasts en

You have purchased a Princess product.

Our aim is to provide quality products with

a tasteful design and at an affordable price.

We hope that you will enjoy this product

Description (fig. A & B)

Your 282893/282895 Princess refrigerator has

been designed for cooling food and beverages

(min. 10 °C). The appliance is also suitable for

heating food and beverages (max. 45 °C). The

maximum capacity of the appliance is 14 litres.

The appliance is suitable for indoor use (AC,

220-240V) and for use in a vehicle (DC, 12V).

The appliance is suitable for domestic use only.

4. Cooling compartment

8. Heating/cooling selector switch

Clean the appliance. Refer to the section •

"Cleaning and maintenance".

Clean the accessories. Refer to the section •

"Cleaning and maintenance".

Before you proceed, we need you to pay

attention to the following notes:

- Make sure that there is sufficient space

around the appliance to allow heat to

escape and provide sufficient ventilation.

Minimum distance to wall or other objects:

Place the appliance on a stable and flat •

Pull the door handle (2) to open the door (1).•

Place the removable plates (5) into the •

cooling compartment (4).

Mount the removable tray (6) to the door (1).•

Close the door (1) until the door handle (2) •

Switching on and off (fig. A)

To switch on the appliance, set the heating/•

cooling selector switch (8) and the DC/AC

selector switch (10) to the required position.

To switch off the appliance, set the heating/•

cooling selector switch (8) and the DC/AC

selector switch (10) to the off position.

Selecting the cooling function or

the heating function (fig. A)

Before you proceed, we need you to pay

attention to the following notes:

- Switch off the appliance for 30 minutes

when changing from cooling to heating or

from heating to cooling.

To select the cooling function, set the •

heating/cooling selector switch (8) to the

COLD position. The cooling indicator (9a)

To select the heating function, set the •

heating/cooling selector switch (8) to the

HOT position. The heating indicator (9b)

To switch off the cooling function or the •

heating function, set the heating/cooling

selector switch (8) to the off position. The

corresponding indicator (9a/9b) goes off.

Selecting alternating current or

direct current (fig. A)

The appliance can be operated using alternating

current (AC, 220-240V) for indoor use or using

direct current (DC, 12V) for use in a vehicle.8

EN Before you proceed, we need you to pay

attention to the following notes:

- Do not use the appliance with a 24V battery

or with a power transformer. If you use

direct current (DC), make sure that the

power supply is suitable for a current of 4A

and stabilised at a voltage of 12V.

To select alternating current (AC), set the •

DC/AC selector switch (10) to the AC

To select direct current (DC), set the DC/AC •

selector switch (10) to the DC position.

To switch off alternating current (AC) or •

direct current (DC), set the DC/AC selector

switch (10) to the off position.

Hints for use (fig. A & B)

Before you proceed, we need you to pay

attention to the following notes:

- Do not touch the metal parts inside the

appliance when using the heating function.

The metal parts become very hot during use.

Place the appliance on a stable and flat •

Assemble the appliance. Refer to the •

Connect the correct power cable to the •

- To use alternating current (AC), connect

the correct end of the AC power cable

(14) to the AC connection (12). Connect

the other end of the AC power cable

(14) to the wall socket.

- To use direct current (DC), connect the

correct end of the DC power cable (13)

to the DC connection (11). Connect the

other end of the DC power cable (13) to

the cigarette lighter jack of the vehicle.

To switch on the appliance, set the heating/•

cooling selector switch (8) and the DC/AC

selector switch (10) to the required

To switch off the appliance, set the heating/•

cooling selector switch (8) and the DC/AC

selector switch (10) to the off position.

After use, remove the mains plug from the •

Allow the appliance to cool down completely.•

Cleaning and maintenance

Before you proceed, we need you to pay

attention to the following notes:

- Before cleaning or maintenance, switch off

the appliance, remove the mains plug from

the wall socket and wait until the appliance

- Do not immerse the appliance in water or

Before you proceed, we would like you to

focus your attention on the following notes:

- Do not use aggressive or abrasive cleaning

agents to clean the appliance.

- Do not use sharp objects to clean the

Regularly check the appliance for possible •

Clean the outside of the appliance with •

a soft, damp cloth. Thoroughly dry the

outside of the appliance with a clean, dry

Clean the inside of the appliance with a soft, •

damp cloth. Thoroughly dry the outside of

the appliance with a clean, dry cloth.

Clean the accessories in soapy water. •

Thoroughly dry the accessories with a clean,

Put the appliance and the accessories in •

the original packaging.

Store the appliance with the accessories in •

a dry and frost-free place, out of the reach

Read the manual carefully before use. •

Keep the manual for future reference.

Only use the appliance and the accessories •

for their intended purposes. Do not use the

appliance and the accessories for other

purposes than described in the manual.

Children should be supervised to ensure •

that they do not play with the appliance.9

EN The appliance is not intended for use by •

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Do not use the appliance if any part or any •

accessory is damaged or defective. If a part

or an accessory is damaged or defective,

it must be replaced by the manufacturer or

an authorised repair agent.

Do not use the appliance near bathtubs, •

showers, basins or other vessels containing

Do not immerse the appliance in water or •

other liquids. If the appliance is immersed

in water or other liquids, do not remove

the appliance with your hands. Immediately

remove the mains plug from the wall socket.

If the appliance is immersed in water or

other liquids, do not use the appliance again.

This appliance is intended to be used in •

domestic and similar applications such as

staff kitchen areas in shops, offices and

other working environments; farm houses;

by clients in hotels, motels and other

residential type environments; bed-and-

breakfast type environments.

Before use, always check that the mains •

voltage is the same as the voltage on the

rating plate of the appliance.

The appliance is not intended to be •

operated by means of an external timer or

separate remote-control system.

Connect the appliance to an earthed wall •

socket. If necessary, use an earthed

extension cable of a suitable diameter

For additional protection, install a residual •

current device (RCD) with a rated residual

operating current that does not exceed

Make sure that water cannot enter the •

contact plugs of the mains cable and the

Always fully unwind the mains cable and •

the extension cable.

Make sure that the mains cable does not •

hang over the edge of a worktop and cannot

be caught accidentally or tripped over.

Keep the mains cable away from heat, oil •

Do not use the appliance if the mains cable •

or the mains plug is damaged or defective.

If the mains cable or the mains plug is

damaged or defective, it must be replaced

by the manufacturer or an authorised

Do not pull the mains cable to disconnect •

the mains plug from the mains.

Disconnect the mains plug from the mains •

when the appliance is not in use, before

assembly or disassembly and before cleaning

Safety instructions for refrigerators

Do not use the appliance outdoors.•

Do not use the appliance in damp •

Do not expose the appliance to direct •

Place the appliance on a stable and flat •

Do not place the appliance on a hob.•

Make sure that the appliance does not •

come into contact with flammable material.

Keep the appliance away from heat •

sources. Do not place the appliance on hot

surfaces or near open flames.

Do not cover the ventilation slots.•

Do not insert foreign objects into the •

Do not spill food or beverages inside the •

Wrap food such as bread, fruits and •

vegetables in plastic wrap.

Do not move the appliance while it is •

Store the appliance in a dry place when •

not in use. Make sure that children do not

have access to stored appliances.

U.K. Wiring instructions

The wires in the mains lead are coloured in

accordance with the following code:

BLUE NEUTRAL BROWN LIVE10

EN As the colours of the wire in the mains lead of

this appliance may not correspond with the

colour markings identifying the terminals on

your plug, proceed as follows:

The wire which is coloured BLUE must be

connected to the terminal which is marked

with the letter N or coloured black.

The wire which is coloured BROWN must be

connected to the terminal which is marked

with the letter L or coloured red.

If a 13Amp (BS1363) plug is used, a 13Amp

(BS1362) fuse must be fitted, or if any other

type of plug is used, a 13Amp fuse must be

fitted, either in the plug or adaptor, or on the

This is a double-insulated appliance and does

not need an earth connection.

Warning! On no account should either the live

or neutral wires be connected to the earth

Subject to change; specifications can be

changed without further notice.11

10. Interruptor selector CC/CA

Børn bør holdes under opsyn for at sikre, •

10. DC/AC-valgbryter

For å velge likestrøm (DC), sett DC/AC-•

valgbryteren (10) i DC-stillingen.

For å slå av vekselstrøm (AC) eller likestrøm •

(DC), sett valgbryteren for DC/AC (10)

10. Interruptor selector CC/CA