Series 7750cc - Shaver BRAUN - Free user manual and instructions

USER MANUAL Series 7750cc BRAUN

(Jebsen Consumer Service

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 3 of 1064

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 4 of 1065

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 5 of 1066

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 6 of 1067

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 7 of 1068

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 8 of 1069

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 9 of 10610

release Series 7 70S

97155740_750cc-6_MN_S4-106.indd 10 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 10 of 10611

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 11 of 10612

Our products are designed to meet the highest standards of quality,

functionality and design. We hope you enjoy your new Braun Shaver.

Read these instructions completely, they contain safety information.

Keep them for future reference.

Your shaving system is provided with a special cord set,

which has an integrated Safety Extra Low Voltage power

supply. Do not exchange or tamper with any part of it, other-

wise there is risk of an electric shock. Only use the special

cord set provided with your appliance.

Do not shave with a damaged foil or cord.

The shaver head is suitable for cleaning under running

tap water. Detach the shaver from the power supply

before cleaning the shaver head in water.

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning the safe

use of the appliance and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children unless they are

older than 8 years and supervised.

To prevent the cleaning fl uid from leaking, ensure that the

Clean&Renew station is placed on a fl at surface. When a

cleaning cartridge is installed, do not tip, move suddenly or

transport the station in any way as cleaning fl uid might spill

out of the cartridge. Do not place the station inside a mirror

cabinet, nor over a radiator, nor place it on a polished or

The cleaning cartridge contains a highly fl ammable liquid so

keep it away from sources of ignition. Do not smoke near the

station. Do not expose to direct sunlight for long periods of

Do not refi ll the cartridge and use only original Braun refi ll

97155740_750cc-6_MN_S4-106.indd 12 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 12 of 10613

1 Cleaning fl uid display

2 Lift button for cartridge exchange

3 Station-to-shaver contacts

5 Cleaning program indicators

6 Station power socket

7 Cleaning cartridge

8 Foil & Cutter cassette

e (–) setting button (sensitive)

Prior to fi rst use you must connect the shaver to

an electrical outlet using the special cord set p

or alternatively proceed as below.

Installing the Clean&Renew station

• Using the special cord set p, connect the

station power socket 6 to an electrical outlet.

• Press the lift button 2 to open the housing.

• Hold the cleaning cartridge 7 down on a fl at,

stable surface (e.g. table).

• Carefully remove the lid from the cartridge.

• Slide the cartridge into the base of the station

as far as it will go.

• Slowly close the housing by pushing it down

The cleaning fl uid display 1 will show how much

fl uid is in the cartridge:

up to 30 cleaning cycles available

up to 7 cleaning cycles remaining

new cartridge required fast cle a

97155740_750cc-6_MN_S4-106.indd 13 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 13 of 10614

Charging and cleaning the shaver

Insert the shaver head down into the cleaning

station. The contacts

u on the back of the

shaver will align with the contacts 3 in the

cleaning station. Important: The shaver needs

to be dry and free from any foam or soap

If required, the Clean&Renew station will auto-

matically charge the shaver. The hygiene status

of the shaver will also be analyzed and one of

the following cleaning program indicators

short economical cleaning required

normal level of cleaning required

high intensive cleaning required

If the station selects one of the required cleaning

programs, it will not start unless you press the

start button 4. For best shaving results, we

recommend cleaning after each shave.

Whilst cleaning is in progress, the respective

cleaning program indicator will blink. Each

cleaning program consists of several cycles,

where cleaning fl uid is fl ushed through the

shaver head and a heat drying process dries

the shaver. Depending on the program selected

the total cleaning time will range from 32 to 43

The cleaning programs should not be inter-

rupted. Please note that whilst the shaver is

drying, the shaving head may be hot and wet.

When the program is fi nished, the blue

indicator will light up. Your shaver is now clean

10 minutes after completing the charging or

cleaning session, the Clean&Renew station

switches to the stand-by mode: The indicators

of the Clean&Renew station turn off.

The green indicator fl ashes when the shaver is

being charged or when in use.

When the battery is fully charged, the charge

segment / will light up continuously provided

that the shaver is switched on or connected to

an electrical outlet.

97155740_750cc-6_MN_S4-106.indd 14 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 14 of 10615

Some minutes after completing the charging, the

shaver switches to the stand-by-mode:

The display turns off.

Low charge indicator:

The red indicator fl ashes when the battery

capacity has dropped below 20%, provided the

shaver is switched on. The remaining capacity

will then be suffi cient for 2 to 3 shaves.

Charging information

• A full charge provides up to 50 minutes

of cordless shaving time. This may vary

according to your beard growth.

• Recommended ambient temperature for

charging is 5 °C to 35 °C. The battery may not

charge properly or at all under extreme low or

high temperatures. Recommended ambient

temperature for shaving is 15 °C to 35 °C.

Do not expose the appliance to temperatures

higher than 50 °C for extended periods of time.

buttons you can choose

the best setting for shaving different areas of

your face and as per your specifi c needs.

The different settings are indicated by the pilot

light incorporated in the on/off switch w:

• dark blue (powerful shave)

• light blue (normal)

• white (for a thorough comfortable shave in

sensitive areas of your face such as neck)

For a thorough and fast shave we recommend

When switching on next time, the last used

setting will be activated.

Press the on/off switch

w to operate the shaver:

• The pivoting shaver head and fl oating foils

automatically adjust to every contour of your

• To shave hard to reach areas (e.g. under the

nose) slide the shaver head «lock» switch 0 to

the back position to lock the pivoting head at

• To trim sideburns, moustache or beard, slide

the pop-out long hair trimmer upwards.

97155740_750cc-6_MN_S4-106.indd 15 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 15 of 10616

Tips for the perfect dry shave

For best shaving results, Braun recommends you

follow 3 simple steps:

1. Always shave before washing your face.

2. At all times, hold the shaver at right angles

3. Stretch your skin and shave against the

direction of your beard growth.

Shaving with the cord

If the shaver has run out of power (discharged),

and you do not have the time to recharge it in the

Clean&Renew station, you may also shave with

the shaver connected to an electrical outlet via

the special cord set.

After each shave, return the shaver to the

Clean&Renew station and proceed as described

above in the section «Before shaving». All charg-

ing and cleaning needs are then automatically

taken care of. With daily use, a cleaning cartridge

should be suffi cient for about 30 cleaning cycles.

The hygienic cleaning cartridge contains alcohol,

which once opened will naturally evaporate

slowly into the surrounding air. Each cartridge,

if not used daily, should be replaced after

approximately 8 weeks.

The cleaning cartridge also contains lubricants,

which may leave residual marks on the outer foil

frame after cleaning. However, these marks can

be removed easily by wiping gently with a cloth

or soft tissue paper.

Rinsing the shaver head under running water

is an alternative way to keep the shaver clean,

especially when travelling:

• Switch on the shaver (cordless) and rinse the

shaver head under hot running water until all

residues have been removed. You may use

liquid soap without abrasive substances. Rinse

off all foam and let the shaver run for a few

• Next, switch off the shaver, press the «release»

9 to remove the Foil & Cutter cassette

• If you regularly clean the shaver under

water, then once a week apply a drop of

light machine oil on top of the Foil & Cutter

cassette. release 90° trimmer er release trimmer

97155740_750cc-6_MN_S4-106.indd 16 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 16 of 10617

Alternatively, you may clean the shaver using a

• Switch off the shaver. Remove the Foil & Cutter

8 and tap it out on a fl at surface.

Using the brush, clean the inner area of the

pivoting head. However, do not clean the

cassette with the brush as this may damage it.

Cleaning the housing

From time to time clean the housing of the

shaver and the Clean&Renew station with a

damp cloth, especially inside the cleaning

chamber where the shaver rests.

Replacing the cleaning cartridge

After having pressed the lift button

housing, wait for a few seconds before removing

the used cartridge to avoid any dripping.

Before discarding the used cartridge, make sure

to close the openings using the lid of the new

cartridge, since the used cartridge will contain

contaminated cleaning solution.

Keeping your shaver in top shape

Replacing the Foil & Cutter cassette

To maintain 100% shaving performance, re-

place the Foil & Cutter cassette 8, when the

replacement symbol lights up on the shaver

display z after about 18 months or when

The replacement symbol will remind you during

the next 7 shaves to replace the Foil & Cutter

cassette. Then the shaver will automatically reset

After you have replaced the Foil & Cutter

cassette, use a ball-pen to push the reset button

t for at least 3 seconds to reset the counter.

While doing so, the replacement light blinks and

goes off when the reset is complete. The manual

reset can be done at any time.

Available at your dealer or Braun Service

• Foil & Cutter cassette 70S

• Cleaning cartridge Clean&Renew CCR release re

release Series 7 70S

97155740_750cc-6_MN_S4-106.indd 17 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 17 of 106Environmental notice

Product contains batteries and/or

recyclable electric waste. For environment

protection do not dispose of in household

waste, but for recycling take to electric

waste collection points provided in your country.

The cleaning cartridge can be disposed with

regular household waste.

Subject to change without notice.

For electric specifi cations, see printing on the

We grant a 2 year guarantee on the product

commencing on the date of purchase. Within the

guarantee period we will eliminate any defects in

the appliance resulting from faults in materials or

workmanship, free of charge either by repairing

or replacing the complete appliance at our

This guarantee extends to every country where

this appliance is supplied by Braun or its

appointed distributor.

This guarantee does not cover: damage due

to improper use, normal wear or use as well as

defects that have a negligible effect on the value

or operation of the appliance. The guarantee

becomes void if repairs are undertaken by

unauthorised persons and if original Braun parts

To obtain service within the guarantee period,

hand in or send the complete appliance with

your sales receipt to an authorised Braun

Customer Service Centre (address information

available online at www.service.braun.com).

This guarantee in no way affects your rights

under statutory law.

97155740_750cc-6_MN_S4-106.indd 18 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 18 of 10619

In Australia, our goods come with guarantees that cannot be excluded

under the Australian Consumer Law. You are entitled to a replacement or

refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

The benefi ts given by this warranty are in addition to other rights and

remedies of the consumer law.

For Claims in Australia please contact:

Procter & Gamble Australia Pty Ltd

1 Innovation Road, Macquarie Park

Telephone: +612 8864 5000; Facsimile: +612 8864 5574

Email: gillette@au.pgconsumers.com

For claims in New Zealand please contact:

Procter & Gamble Distributing New Zealand Limited

Unit 3, Building I, 5 Orbit Drive

Rosedale, North Shore City 0632

Auckland, New Zealand

Telephone: +649 477 6400; Facsimile: +649 477 6399

Email: gillette@nz.pgconsumers.com

This appliance is also covered by a 24 Month Replacement Warranty

commencing on the date of purchase (Our Warranty).

Our Warranty applies in all States and Territories of Australia and in

New Zealand and is in addition to any mandatory statutory obligations

imposed on Procter & Gamble Australia Pty. Ltd., its distributors and its

manufacturer. Our Warranty does not purport to exclude, restrict or modify

any such mandatory statutory obligations.

Our Warranty only covers defects in the appliance resulting from faults in

workmanship or materials. Therefore, if your appliance becomes faulty as a

result of faults in workmanship or materials, it will be exchanged by your retailer,

on presentation of proof of purchase.

Our Warranty only applies to domestic or household use of this appliance and

the warranty will only apply if the correct operating instructions included with this

product have been followed. For any appliance replaced under this warranty,

Our Warranty ends on the expiry of the warranty period that applied to the

Our Warranty does not cover:

A. Damage arising from improper use or operation on incorrect voltages.

B. Breakages to shaver foils, glass jars, etc.

C. Normal wear due to moving parts.

D. Repairs undertaken by unauthorised service personnel or use of non

E. Appliances that are outside the warranty period or are not faulty.

This appliance is not intended for use by young children or infi rm persons

without supervision. Young children should be supervised to ensure that they do

not play with the appliance.

If the appliance is powered by a cord extension set or electrical portable outlet

device these should be positioned so they are not subject to splashing or ingress

97155740_750cc-6_MN_S4-106.indd 19 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 19 of 10620

To the extent permitted by the laws of the Commonwealth of Australia and New

Zealand and applicable laws of a State or Territory of Australia, and without

affecting any mandatory statutory obligations imposed by law,

Our Warranty is given in exchange for any other rights you may have against

Procter & Gamble Australia Pty. Ltd. or its distributors or manufacturer, whether

at law, in tort (including negligence), in equity or under statute.

Please retain proof of purchase of this appliance. If you have any questions in relation

to Our Warranty, please call our Consumer Service line (see below for numbers).

If you intend to make a claim please telephone our Customer Service line on the

numbers set out below to obtain information about your claim and any costs

associated with claiming under Our Warranty. You will bear the cost of returning

If you are sending your appliance for repair under Our Warranty, please pack the

appliance adequately and send it to your nearest Service Agent, at your

expense. For service or replacement parts refer to the authorised Service Agents

listed overleaf. Local Service Agents may change from time to time – in that

event please contact the Consumer Service free call number below for updated

local service agent details.

Australian Consumer Service (free call): 1 800 641 820

New Zealand Consumer Service (free call): 0 800 108 909

Australian & New Zealand Service Agents

VICTORIA & TASMANIA Statewide Services Pty Ltd trading

17-19 Hossack Avenue

Email: jaappliances@

statewideservices.com.au

QUEENSLAND Walters Import trading as Brisbane

Appliance Service Centre

Email: basc@waltersimport.com.au

WESTERN AUSTRALIA Mark 1 Appliances

Unit 1, 46 Abernethy Road

Rooty Hill, NSW 2766

SOUTH AUSTRALIA & NT Adelaide Service Centre

Parkholme Shopping Centre

319 Oaklands Road, Parkholme

NEW ZEALAND Key Service Ltd

7D Echelon Place East Tamaki

Auckland, New Zealand

(PO Box 38569, Howick, Auckland,

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 20 of 10621

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 21 of 10622

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 22 of 10623

station Clean&Renew s’éteignent.

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 23 of 10624

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 24 of 10625

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 25 of 10626

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 26 of 10627

release Series 7 70S

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 28 of 10629

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 29 of 10630

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 30 of 10631

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 31 of 10632

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 32 of 10633

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 33 of 10634

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 34 of 10635

release Series 7 70S

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 36 of 10637

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 37 of 10638

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 38 of 10639

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 39 of 10640

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 40 of 10641

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 41 of 10642

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 42 of 10643

release Series 7 70S

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 44 of 10645

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 45 of 10646

Supporto Clean&Renew

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 46 of 10647

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 47 of 10648

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 48 of 10649

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 49 of 10650

release Series 7 70S

97155740_750cc-6_MN_S4-106.indd 50 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 50 of 10651

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 51 of 10652

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 52 of 10653

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 53 of 10654

scheerapparaat is schoon

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 54 of 10655

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 55 of 10656

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 56 of 10657

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 57 of 10658

release Series 7 70S

97155740_750cc-6_MN_S4-106.indd 58 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 58 of 10659

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 59 of 10660

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 60 of 10661

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 61 of 10662

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 62 of 10663

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 63 of 10664

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 64 of 10665

fjernes for at undgå dryp.

• Rensepatron Clean&Renew CCR release re

release Series 7 70S

Braun Service Center.

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 67 of 10668

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 68 of 10669

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 69 of 10670

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 70 of 10671

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 71 of 10672

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 72 of 10673

release Series 7 70S

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 74 of 10675

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 75 of 10676

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 76 of 10677

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 77 of 10678

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 78 of 10679

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 79 of 10680

• Rengöringskassett Clean&Renew CCR release re

release Series 7 70S

97155740_750cc-6_MN_S4-106.indd 80 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 80 of 10681

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 81 of 10682

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 82 of 10683

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 83 of 10684

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 84 of 10685

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 85 of 10686

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 86 of 10687

release Series 7 70S

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 88 of 10689

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 89 of 10690

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 90 of 10691

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 91 of 10692

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 92 of 10693

release Series 7 70S

97155740_750cc-6_MN_S4-106.indd 94 17.12.14 10:04

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 94 of 10695

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 95 of 10696

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 96 of 10697

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 98 of 10699

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 99 of 106100

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 100 of 106101

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 102 of 106103

release Series 7 70S

CSS APPROVED Effective Date 17Dec2014 GMT - Printed 29Sep2015 Page 104 of 106