Power to Style K5 2200 - Sèche-cheveux IMETEC - Free user manual and instructions

USER MANUAL Power to Style K5 2200 IMETEC

Operating instructions

Tel. +39.035.688.111 Fax +39.035.320.149

MI001463.indd 7 09/12/2013 17:54:46EN

HAIR DRYER INSTRUCTIONS FOR USE Dear customer, IMETEC thanks you for having purchased this

product. We are certain you will appreciate the quality and

reliability of this appliance, designed and manufactured with

customer satisfaction in mind. This instruction manual has

been drawn up in compliance with the European Standard EN

IMPORTANT! Instructions and

warnings for safe use

Before using this appliance, carefully read the

instructions and in particular the safety warnings, which

must be complied with. Keep this manual and illustrative

guide with the appliance for future consultation. Should

you pass the appliance on to another user, make sure to

also include this documentation.

Should certain parts of this booklet be dicult to

understand or should doubts arise, contact the company

before using the product, at the address indicated on the

INDEX Safety warnings 9

General instructions 11

Use of accessories 12

Assistance and warranty 14

• After having removed the appliance from its

packaging, verify its integrity based on the

drawing and any presence of damage caused

by transport. If in doubt, do not use the

appliance and contact an authorised service

• Do not let children play with the packaging!

Keep the plastic bag out of the reach of children

- risk of suocation!

• Before connecting the appliance, please make

sure that the voltage data indicated on the

identication technical data (1) correspond to

those of the mains voltage. The identication

technical data (1) are found on the appliance

(and on the battery charger, if present).

• This appliance must only be used for the

purpose for which it was designed, namely,

as a hair dryer for home use. Any other use

is considered not compliant and therefore

• If the appliance is used in the bathroom,

remove the plug from the socket after use, as

bringing it close to water is dangerous even if

the appliance is switched o.

• For enhanced safety, it is recommended to

install a dierential circuit breaker with a

nominal operating dierential current that

does not exceed 30 mA (10 mA is ideal) in

the electric circuit of the bathroom. Ask your

installer for advice.

MI001463.indd 9 09/12/2013 17:54:46EN

ATTENTION! Do not use this appliance

near bathtubs, showers, wash basins

or other vessels containing water!

Never place the appliance in water!

• This appliance can be used by children

aged from 8 years and above and persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given supervision

or instruction concerning use of the appliance

in a safe way and understand the hazards

involved. Children shall not play with the

appliance. Cleaning and user maintenance

shall not be made by children unless they are

older than 8 and supervised.

Keep the appliance and its cord out of reach of

children less than 8 years.

DO NOT use the appliance with wet

hands, damp feet or barefoot.

DO NOT pull the power cable or the

appliance itself to remove the plug from

DO NOT expose the appliance to humidity

or weather conditions (rain, sun, etc.).

• Always disconnect the appliance from the

mains supply before cleaning or performing

maintenance and when the appliance is not in

• If the appliance is faulty or malfunctions, switch

it o and do not tamper with it. Any repairs must

only be carried out by an authorised technical

• If the power cable is damaged it must be

replaced by an authorised technical service

centre, so as to prevent all risks.

MI001463.indd 10 09/12/2013 17:54:46EN

DO NOT obstruct the intake lter and

always keep it free from dust and hair.

DO NOT spray hairspray while the

appliance is switched on. There is a risk

SYMBOLS Class II appliance

GENERAL INSTRUCTIONS Refer to page I of the Illustrative Guide to check the contents

All the gures are found on the inside pages of the cover.

3B Air temperature selection key

6B Diuser (if present)

7 Ionizer LED (where present)

For the appliance features, refer to the external packaging.

Use only the supplied accessories.

MI001463.indd 11 09/12/2013 17:54:46EN

USE OF ACCESSORIES The hair dryer is provided with the accessories described

The accessory is mounted on the appliance by pressing it

onto the front part of the hair dryer (4) until it is inserted. When

nished using it, the accessory can be removed by pulling it

Use the styling nozzle to direct the air jet as you wish.

Diuser (6B) (where present)

If the appliance comes with a diuser, replace the styling

nozzle to add volume to your hair.

The diuser is only to be used on damp hair in order to obtain

a natural hair style or a natural drying eect:

• Take a lock of hair and twist it in the diuser. Make sure

that even the ends are entered.

• Then switch the hair dryer on at medium speed and

maximum temperature to dry your hair.

• Switch the hair dryer on at minimum speed and

• Place the diuser directly on your hair and move it from

the bottom upwards, as though you wanted to lightly

IMPORTANT: use only the original accessories of the

USE Refer to the gure in the illustrative guide of the instructions

Appliance with separate keys for air ow (3A) and

The two keys set air ow and temperature separately at the

Air ow button (3A) Temperature button (3B)

0 = OFF 1 = low temperature

1 = medium air ow 2 = medium temperature

2 = strong air ow 3 = high temperature

MI001463.indd 12 09/12/2013 17:54:46EN

If the appliance is equipped with this button, it can be used

• If this button is pressed while the appliance is on, the hot

air cools down and the set style lasts longer.

• Once the button is released, the appliance returns to a

hot air ow at the selected level.

Ioniser (7) (if present)

The appliance has an ionizer featuring ION

technology. This function is automatically

activated when the appliance is switched

on. The LED (7) indicates proper operation.

STORAGE When the hair dryer is not used, unplug the appliance from the

socket and store it in a dry and dust-free place.

Do not wind the power cord around the appliance. Coil it

up loosely without bending it.

MAINTENANCE IMPORTANT! Switch the appliance o and

unplug it from the socket before cleaning!

Make sure all cleaned parts are completely dry

before reusing the appliance!

CLEANING Cleaning the appliance and accessories

Clean the appliance and the accessories (diuser, nozzle)

with a damp cloth when needed. Do not use solvents or other

aggressive or abrasive detergents. Otherwise, the surface

Check the intake opening of the appliance regularly and

remove all hair and dust.

Cleaning the intake lter (5A)

If the appliance is provided with an intake lter, clean it as

• Open the lter cap (5B) as shown in the gure.

• Wipe the front and rear of the retina (5A) and the lter cap

(5B) with a damp cloth.

• Let the parts dry well and put them back on in inverse

MI001463.indd 13 09/12/2013 17:54:46EN

Note: the more dust is present in the place where the hair

dryer is used, the more often the lter must be cleaned.

DISPOSAL The product is packaged in recyclable materials.

Dispose of it in compliance with the environmental

protection standards.

The appliance must be disposed of in compliance with

the provisions of EU standard 2002/96/EC at the end of

its life cycle. This regards recycling useful substances

in the appliance, which reduces environmental impact.

For further information contact the local waste authority

or the appliance retailer.

ASSISTANCE AND WARRANTY To request repairs or purchase spare parts please contact

IMETEC’s authorised customer service centre on the Toll-Free

Number below or via the website.

The appliance is covered by the manufacturer’s warranty. For

details, read the attached warranty sheet.

Failure to comply with the instructions for use and maintenance

provided in this manual will render the manufacturer’s warranty

Tel. +39.035.688.111 Fax +39.035.320.149

Tel. +39.035.688.111 Fax +39.035.320.149

Tel. +39.035.688.111 Fax +39.035.320.149

Tel. +39.035.688.111 Fax +39.035.320.149

Tel. +39.035.688.111 Fax +39.035.320.149

Tel. +39.035.688.111 Fax +39.035.320.149

Tel. +39.035.688.111 Fax +39.035.320.149

Tel. +39.035.688.111 Fax +39.035.320.149

Tel. +39.035.688.111 Fax +39.035.320.149

Tel. +39.035.688.111 Fax +39.035.320.149