GSB 10 82LI Professional - Drill BOSCH - Free user manual and instructions

USER MANUAL GSB 10 82LI Professional BOSCH

OBJ_BUCH-1458-006.book Page 1 Thursday, December 15, 2016 2:06 PM2 |

OBJ_BUCH-1458-006.book Page 2 Thursday, December 15, 2016 2:06 PMDeutsch | 3 Bosch Power Tools 1 609 92A 3SL | (15.12.16) Deutsch

WARNUNG OBJ_BUCH-1458-006.book Page 3 Thursday, December 15, 2016 5:08 PM4 | Deutsch

OBJ_BUCH-1458-006.book Page 4 Thursday, December 15, 2016 5:08 PMDeutsch | 5

OBJ_BUCH-1458-006.book Page 5 Thursday, December 15, 2016 5:08 PM6 | Deutsch

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 6 Thursday, December 15, 2016 5:08 PMDeutsch | 7

Bosch Power Tools 1 609 92A 3SL | (15.12.16)

3752 Wimmis BE Änderungen vorbehalten. English

General Power Tool Safety Warnings

Read all safety warnings and all in-

structions. Failure to follow the warnings

and instructions may result in electric shock, fire and/or seri-

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

 Keep work area clean and well lit. Cluttered or dark areas

 Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or

dust. Power tools create sparks which may ignite the dust

 Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

 Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

 Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

 Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric

 Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges and moving parts. Damaged

or entangled cords increase the risk of electric shock.

 When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suitable

for outdoor use reduces the risk of electric shock.

 If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

 Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the influence of drugs,

alcohol or medication. A moment of inattention while op-

erating power tools may result in serious personal injury.

 Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal inju-

 Prevent unintentional starting. Ensure the switch is in

the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or en-

ergising power tools that have the switch on invites acci-

 Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.

 Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

 Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

 If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are con-

nected and properly used. Use of dust collection can re-

duce dust-related hazards.

Power tool use and care

 Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

 Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

WARNING OBJ_BUCH-1458-006.book Page 8 Thursday, December 15, 2016 5:08 PMEnglish | 9

Bosch Power Tools 1 609 92A 3SL | (15.12.16)

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other

condition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power

 Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

 Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

Battery tool use and care

 Recharge only with the charger specified by the manu-

facturer. A charger that is suitable for one type of battery

pack may create a risk of fire when used with another bat-

 Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create a

risk of injury and fire.

 When battery pack is not in use, keep it away from oth-

er metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

 Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addition-

ally seek medical help. Liquid ejected from the battery

may cause irritation or burns.

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Drills and Screw-

 Wear ear protectors when impact drilling. Exposure to

noise can cause hearing loss.

 Use auxiliary handle(s), if supplied with the tool. Loss

of control can cause personal injury.

 Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory

or fastener may contact hidden wiring. Cutting accesso-

ry and fasteners contacting a “live” wire may make ex-

posed metal parts of the power tool “live” and could give

the operator an electric shock.

 Use appropriate detectors to determine if utility lines

are hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property dam-

 Switch off the power tool immediately when the tool in-

sert jams. Be prepared for high reaction torque that

can cause kickback. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

 Hold the machine with a firm grip. High reaction torque

can briefly occur while driving in and loosening screws.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

 Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

 In case of damage and improper use of the battery, va-

pours may be emitted. Ventilate the area and seek

medical help in case of complaints. The vapours can irri-

tate the respiratory system.

 Use the battery only in conjunction with your Bosch

power tool. This measure alone protects the battery

against dangerous overload.

 The battery can be damaged by pointed objects such as

nails or screwdrivers or by force applied externally. An

internal short circuit can occur and the battery can burn,

smoke, explode or overheat.

Additional Safety and Working

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health and cause allergic reactions, lead to res-

piratory infections and/or cancer. Materials containing

asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the mate-

 Prevent dust accumulation at the workplace. Dusts can

 The battery is supplied partially charged. To ensure full

battery capacity, completely charge the battery in the

battery charger before using for the first time.

 Read the operating instructions of the battery charger.

OBJ_BUCH-1458-006.book Page 9 Thursday, December 15, 2016 5:08 PM10 | English

1 609 92A 3SL | (15.12.16) Bosch Power Tools

 Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

 Adjust the gear switch only when the machine is at a

 If the gear switch cannot be pushed to the stop, turn

the drill chuck a little.

The battery charge-control indicator consists of three green

LEDs, and indicates the charge condition of the battery for a

few seconds when the On/Off switch is pressed halfway or fully.

To save energy, only switch the power tool on when using it.

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the machine in a better and safer

Continuous lighting 3 x green

Continuous lighting 2 x green

Continuous lighting 1 x green

Combination Cordless Drill

Grey-marked area: Handle (insulated

Read all safety warnings and all instruc-

Before any work on the machine itself,

Always wear ear protection.

Drilling without impact

Battery Charge Indicator

M Maximum torque according to ISO 5393

Weight according to EPTA-Procedure

* Value dependent of the battery pack

Permitted ambient temperature during

Permitted ambient temperature during

* Limited performance at temperatures

<0 °C Recommended batteries

OBJ_BUCH-1458-006.book Page 10 Thursday, December 15, 2016 5:08 PMEnglish | 11

Bosch Power Tools 1 609 92A 3SL | (15.12.16)

Combination cordless drill.

Battery, application tools and other accessories shown or de-

scribed are not part of the standard delivery scope.

A complete overview of accessories can be found in our ac-

The machine is intended for driving in and loosening screws

as well as for drilling in wood, metal, ceramic and plastic and

for impact drilling in brick, brickwork and masonry.

The light of this power tool is intended to illuminate the power

tool’s direct area of working operation and is not suitable for

household room illumination.

The technical data of the machine are listed in the table on

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with all rele-

vant provisions of the directives 2009/125/EC (Regulation

1194/2012), 2011/65/EU, 2014/30/EU, 2006/42/EC in-

cluding their amendments and complies with the following

The measured values of the machine are listed in the table on

Sound emission values determined according to

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN 60745.

The vibration level given in this information sheet has been

measured in accordance with a standardised test given in

EN 60745 and may be used to compare one tool with anoth-

er. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or insertion tools or is

poorly maintained, the vibration emission may differ. This

may significantly increase the exposure level over the total

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work pat-

Mounting and Operation

Recommended chargers

Executive Vice President

Head of Product Certification

PT/ECS Action Figure Page

Removing the battery

Inserting the battery

Mounting application tools

Reversing the rotational direction

Setting the operating mode

Gear selection, mechanical

Switching On and Off

Checking the battery charge condition

Selecting Accessories

OBJ_BUCH-1458-006.book Page 11 Thursday, December 15, 2016 5:08 PM12 | English

1 609 92A 3SL | (15.12.16) Bosch Power Tools

Maintenance and Cleaning

 For safe and proper working, always keep the machine

and ventilation slots clean.

After-sales Service and Application

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

Bosch’s application service team will gladly answer questions

concerning our products and their accessories.

In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of

Robert Bosch Ltd. (B.S.C.)

UB 9 5HJ At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Customer Contact Center

Republic of South Africa

Hotline: (011) 6519600

35 Roper Street, New Centre

E-Mail: bsctools@icon.co.za

KZN – BSC Service Centre

Unit E, Almar Centre

E-Mail: bsc.dur@za.bosch.com

Western Cape – BSC Service Centre

Democracy Way, Prosperity Park

The contained lithium-ion batteries are subject to the Danger-

ous Goods Legislation requirements. The user can transport

the batteries by road without further requirements.

When being transported by third parties (e. g.: air transport or

forwarding agency), special requirements on packaging and

labelling must be observed. For preparation of the item being

shipped, consulting an expert for hazardous material is re-

Dispatch batteries only when the housing is undamaged.

Tape or mask off open contacts and pack up the battery in

such a manner that it cannot move around in the packaging.

Please also observe possibly more detailed national regula-

The machine, rechargeable batteries, accessories

and packaging should be sorted for environmental-

Do not dispose of power tools and batteries/rechargeable

batteries into household waste!

Only for EC countries:

According to the European Guideline

2012/19/EU, power tools that are no long-

er usable, and according to the European

Guideline 2006/66/EC, defective or used

battery packs/batteries, must be collected

separately and disposed of in an environ-

mentally correct manner.

OBJ_BUCH-1458-006.book Page 12 Thursday, December 15, 2016 5:08 PMFrançais | 13 Bosch Power Tools 1 609 92A 3SL | (15.12.16) Batteries no longer suitable for use can be directly returned at:

Robert Bosch Ltd. (B.S.C.)

UB 9 5HJ At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

AVERTISSEMENT OBJ_BUCH-1458-006.book Page 13 Thursday, December 15, 2016 5:08 PM14 | Français

OBJ_BUCH-1458-006.book Page 14 Thursday, December 15, 2016 5:08 PMFrançais | 15

Perçage sans percussion

OBJ_BUCH-1458-006.book Page 15 Thursday, December 15, 2016 5:08 PM16 | Français

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 16 Thursday, December 15, 2016 5:08 PMFrançais | 17

Bosch Power Tools 1 609 92A 3SL | (15.12.16)

ADVERTENCIA OBJ_BUCH-1458-006.book Page 18 Thursday, December 15, 2016 5:08 PMEspañol | 19

OBJ_BUCH-1458-006.book Page 19 Thursday, December 15, 2016 5:08 PM20 | Español

OBJ_BUCH-1458-006.book Page 20 Thursday, December 15, 2016 5:08 PMEspañol | 21

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 21 Thursday, December 15, 2016 5:08 PM22 | Español

1 609 92A 3SL | (15.12.16) Bosch Power Tools

ATENÇÃO OBJ_BUCH-1458-006.book Page 23 Thursday, December 15, 2016 5:08 PM24 | Português

OBJ_BUCH-1458-006.book Page 24 Thursday, December 15, 2016 5:08 PMPortuguês | 25

OBJ_BUCH-1458-006.book Page 25 Thursday, December 15, 2016 5:08 PM26 | Português

OBJ_BUCH-1458-006.book Page 26 Thursday, December 15, 2016 5:08 PMPortuguês | 27

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 27 Thursday, December 15, 2016 5:08 PM28 | Italiano 1 609 92A 3SL | (15.12.16) Bosch Power Tools Portugal

Conforme as Directivas Europeias

AVVERTENZA OBJ_BUCH-1458-006.book Page 28 Thursday, December 15, 2016 5:08 PMItaliano | 29

OBJ_BUCH-1458-006.book Page 29 Thursday, December 15, 2016 5:08 PM30 | Italiano

OBJ_BUCH-1458-006.book Page 30 Thursday, December 15, 2016 5:08 PMItaliano | 31

OBJ_BUCH-1458-006.book Page 31 Thursday, December 15, 2016 5:08 PM32 | Italiano

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 32 Thursday, December 15, 2016 5:08 PMItaliano | 33

WAARSCHUWING OBJ_BUCH-1458-006.book Page 34 Thursday, December 15, 2016 5:08 PMNederlands | 35

OBJ_BUCH-1458-006.book Page 35 Thursday, December 15, 2016 5:08 PM36 | Nederlands

OBJ_BUCH-1458-006.book Page 36 Thursday, December 15, 2016 5:08 PMNederlands | 37

Executive Vice President

Head of Product Certification

ADVARSEL OBJ_BUCH-1458-006.book Page 38 Thursday, December 15, 2016 5:08 PMDansk | 39

OBJ_BUCH-1458-006.book Page 39 Thursday, December 15, 2016 5:08 PM40 | Dansk

OBJ_BUCH-1458-006.book Page 40 Thursday, December 15, 2016 5:08 PMDansk | 41

OBJ_BUCH-1458-006.book Page 41 Thursday, December 15, 2016 5:08 PM42 | Dansk

Bosch Service Center

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 42 Thursday, December 15, 2016 5:08 PMSvenska | 43 Bosch Power Tools 1 609 92A 3SL | (15.12.16) Transport

VARNING OBJ_BUCH-1458-006.book Page 43 Thursday, December 15, 2016 5:08 PM44 | Svenska

OBJ_BUCH-1458-006.book Page 44 Thursday, December 15, 2016 5:08 PMSvenska | 45

OBJ_BUCH-1458-006.book Page 45 Thursday, December 15, 2016 5:08 PM46 | Svenska

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 46 Thursday, December 15, 2016 5:08 PMSvenska | 47

Bosch Power Tools 1 609 92A 3SL | (15.12.16)

Bosch Service Center

OBJ_BUCH-1458-006.book Page 47 Thursday, December 15, 2016 5:08 PM48 | Norsk 1 609 92A 3SL | (15.12.16) Bosch Power Tools Norsk

ADVARSEL OBJ_BUCH-1458-006.book Page 48 Thursday, December 15, 2016 5:08 PMNorsk | 49

OBJ_BUCH-1458-006.book Page 49 Thursday, December 15, 2016 5:08 PM50 | Norsk

OBJ_BUCH-1458-006.book Page 50 Thursday, December 15, 2016 5:08 PMNorsk | 51

Executive Vice President

Head of Product Certification

VAROITUS OBJ_BUCH-1458-006.book Page 52 Thursday, December 15, 2016 5:08 PMSuomi | 53

OBJ_BUCH-1458-006.book Page 53 Thursday, December 15, 2016 5:08 PM54 | Suomi

OBJ_BUCH-1458-006.book Page 54 Thursday, December 15, 2016 5:08 PMSuomi | 55

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 55 Thursday, December 15, 2016 5:08 PM56 | Suomi

1 609 92A 3SL | (15.12.16) Bosch Power Tools

OBJ_BUCH-1458-006.book Page 57 Thursday, December 15, 2016 5:08 PM58 | Eλληνικά

OBJ_BUCH-1458-006.book Page 58 Thursday, December 15, 2016 5:08 PMEλληνικά | 59

OBJ_BUCH-1458-006.book Page 59 Thursday, December 15, 2016 5:08 PM60 | Eλληνικά

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 60 Thursday, December 15, 2016 5:08 PMEλληνικά | 61

Bosch Power Tools 1 609 92A 3SL | (15.12.16)

UYARI OBJ_BUCH-1458-006.book Page 62 Thursday, December 15, 2016 5:08 PMTürkçe | 63

OBJ_BUCH-1458-006.book Page 63 Thursday, December 15, 2016 5:08 PM64 | Türkçe

OBJ_BUCH-1458-006.book Page 64 Thursday, December 15, 2016 5:08 PMTürkçe | 65

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 65 Thursday, December 15, 2016 5:08 PM66 | Türkçe

OBJ_BUCH-1458-006.book Page 68 Thursday, December 15, 2016 5:08 PMPolski | 69

OBJ_BUCH-1458-006.book Page 69 Thursday, December 15, 2016 5:08 PM70 | Polski

OBJ_BUCH-1458-006.book Page 70 Thursday, December 15, 2016 5:08 PMPolski | 71

Robert Bosch Sp. z o.o.

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 71 Thursday, December 15, 2016 5:08 PM72 | Česky 1 609 92A 3SL | (15.12.16) Bosch Power Tools Transport

OBJ_BUCH-1458-006.book Page 72 Thursday, December 15, 2016 5:08 PMČesky | 73

OBJ_BUCH-1458-006.book Page 73 Thursday, December 15, 2016 5:08 PM74 | Česky

OBJ_BUCH-1458-006.book Page 74 Thursday, December 15, 2016 5:08 PMČesky | 75

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 75 Thursday, December 15, 2016 5:08 PM76 | Česky

1 609 92A 3SL | (15.12.16) Bosch Power Tools

OBJ_BUCH-1458-006.book Page 76 Thursday, December 15, 2016 5:08 PMSlovensky | 77 Bosch Power Tools 1 609 92A 3SL | (15.12.16) Slovensky

POZOR OBJ_BUCH-1458-006.book Page 77 Thursday, December 15, 2016 5:08 PM78 | Slovensky

OBJ_BUCH-1458-006.book Page 78 Thursday, December 15, 2016 5:08 PMSlovensky | 79

OBJ_BUCH-1458-006.book Page 79 Thursday, December 15, 2016 5:08 PM80 | Slovensky

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 80 Thursday, December 15, 2016 5:08 PMSlovensky | 81

Bosch Power Tools 1 609 92A 3SL | (15.12.16)

OBJ_BUCH-1458-006.book Page 81 Thursday, December 15, 2016 5:08 PM82 | Magyar 1 609 92A 3SL | (15.12.16) Bosch Power Tools Magyar

FIGYELMEZTETÉS OBJ_BUCH-1458-006.book Page 82 Thursday, December 15, 2016 5:08 PMMagyar | 83

OBJ_BUCH-1458-006.book Page 83 Thursday, December 15, 2016 5:08 PM84 | Magyar

OBJ_BUCH-1458-006.book Page 84 Thursday, December 15, 2016 5:08 PMMagyar | 85

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 85 Thursday, December 15, 2016 5:08 PM86 | Magyar

1 609 92A 3SL | (15.12.16) Bosch Power Tools

OBJ_BUCH-1458-006.book Page 87 Thursday, December 15, 2016 5:08 PM88 | Русский

OBJ_BUCH-1458-006.book Page 88 Thursday, December 15, 2016 5:08 PMРусский | 89

OBJ_BUCH-1458-006.book Page 89 Thursday, December 15, 2016 5:08 PM90 | Русский

OBJ_BUCH-1458-006.book Page 90 Thursday, December 15, 2016 5:08 PMРусский | 91

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 91 Thursday, December 15, 2016 5:08 PM92 | Русский

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 99 Thursday, December 15, 2016 5:08 PM100 | Қазақша

OBJ_BUCH-1458-006.book Page 100 Thursday, December 15, 2016 5:08 PMҚазақша | 101

OBJ_BUCH-1458-006.book Page 101 Thursday, December 15, 2016 5:08 PM102 | Қазақша

OBJ_BUCH-1458-006.book Page 102 Thursday, December 15, 2016 5:08 PMҚазақша | 103

Executive Vice President

Head of Product Certification

AVERTISMENT OBJ_BUCH-1458-006.book Page 104 Thursday, December 15, 2016 5:08 PMRomână | 105

OBJ_BUCH-1458-006.book Page 105 Thursday, December 15, 2016 5:08 PM106 | Română

OBJ_BUCH-1458-006.book Page 106 Thursday, December 15, 2016 5:08 PMRomână | 107

Executive Vice President

Head of Product Certification

PT/ECS Simbol Semnificaţie

OBJ_BUCH-1458-006.book Page 107 Thursday, December 15, 2016 5:08 PM108 | Română

Directivei Europene 2006/66/CE, acumu-

OBJ_BUCH-1458-006.book Page 109 Thursday, December 15, 2016 5:08 PM110 | Български

OBJ_BUCH-1458-006.book Page 110 Thursday, December 15, 2016 5:08 PMБългарски | 111

OBJ_BUCH-1458-006.book Page 111 Thursday, December 15, 2016 5:08 PM112 | Български

OBJ_BUCH-1458-006.book Page 112 Thursday, December 15, 2016 5:08 PMБългарски | 113

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 114 Thursday, December 15, 2016 5:08 PMМакедонски | 115

OBJ_BUCH-1458-006.book Page 116 Thursday, December 15, 2016 5:08 PMМакедонски | 117

Executive Vice President

Head of Product Certification

UPOZORENJE OBJ_BUCH-1458-006.book Page 119 Thursday, December 15, 2016 5:08 PM120 | Srpski

OBJ_BUCH-1458-006.book Page 120 Thursday, December 15, 2016 5:08 PMSrpski | 121

OBJ_BUCH-1458-006.book Page 121 Thursday, December 15, 2016 5:08 PM122 | Srpski

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 122 Thursday, December 15, 2016 5:08 PMSrpski | 123

Bosch Power Tools 1 609 92A 3SL | (15.12.16)

OPOZORILO OBJ_BUCH-1458-006.book Page 124 Thursday, December 15, 2016 5:08 PMSlovensko | 125

OBJ_BUCH-1458-006.book Page 125 Thursday, December 15, 2016 5:08 PM126 | Slovensko

OBJ_BUCH-1458-006.book Page 126 Thursday, December 15, 2016 5:08 PMSlovensko | 127

Executive Vice President

Head of Product Certification

UPOZORENJE OBJ_BUCH-1458-006.book Page 128 Thursday, December 15, 2016 5:08 PMHrvatski | 129

OBJ_BUCH-1458-006.book Page 129 Thursday, December 15, 2016 5:08 PM130 | Hrvatski

OBJ_BUCH-1458-006.book Page 130 Thursday, December 15, 2016 5:08 PMHrvatski | 131

Executive Vice President

Head of Product Certification

PT/ECS OBJ_BUCH-1458-006.book Page 131 Thursday, December 15, 2016 5:08 PM132 | Hrvatski

1 609 92A 3SL | (15.12.16) Bosch Power Tools

OBJ_BUCH-1458-006.book Page 134 Thursday, December 15, 2016 5:08 PMEesti | 135

OBJ_BUCH-1458-006.book Page 135 Thursday, December 15, 2016 5:08 PM136 | Eesti

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 138 Thursday, December 15, 2016 5:08 PMLatviešu | 139

OBJ_BUCH-1458-006.book Page 139 Thursday, December 15, 2016 5:08 PM140 | Latviešu

OBJ_BUCH-1458-006.book Page 140 Thursday, December 15, 2016 5:08 PMLatviešu | 141

Executive Vice President

Head of Product Certification

OBJ_BUCH-1458-006.book Page 142 Thursday, December 15, 2016 5:08 PMLietuviškai | 143

OBJ_BUCH-1458-006.book Page 143 Thursday, December 15, 2016 5:08 PM144 | Lietuviškai

OBJ_BUCH-1458-006.book Page 144 Thursday, December 15, 2016 5:08 PMLietuviškai | 145

Executive Vice President

Head of Product Certification

PT/ECS Simbolis Reikšmė

OBJ_BUCH-1458-006.book Page 145 Thursday, December 15, 2016 5:08 PM146 | Lietuviškai

OBJ_BUCH-1458-006.book Page 146 Thursday, December 15, 2016 5:08 PM | 147

Head of Product Certification

Senior Vice President

Head of Product Certification

Senior Vice President

OBJ_BUCH-1458-006.book Page 157 Thursday, December 15, 2016 2:06 PM1 609 92A 3SL | (15.12.16) Bosch Power Tools

OBJ_BUCH-1458-006.book Page 158 Thursday, December 15, 2016 2:06 PM| 159

OBJ_BUCH-1458-006.book Page 159 Thursday, December 15, 2016 2:06 PM1 609 92A 3SL | (15.12.16) Bosch Power Tools

OBJ_BUCH-1458-006.book Page 160 Thursday, December 15, 2016 2:06 PM| 161

OBJ_BUCH-1458-006.book Page 161 Thursday, December 15, 2016 2:06 PM1 609 92A 3SL | (15.12.16) Bosch Power Tools

OBJ_BUCH-1458-006.book Page 162 Thursday, December 15, 2016 2:06 PM