4 Men Clipper Pro 535599 - Beard trimmer PRINCESS - Free user manual and instructions

USER MANUAL 4 Men Clipper Pro 535599 PRINCESS

Stel dehaarlengthe in.

You have purchased a Princess appliance. Our aim is to provide quality products with a tasteful design and at an affordable price. We hope that you will enjoy this appliance for many years.

Instructions for use

The instructions for use have been collected in the corresponding section. Be familiar with the safety instructions when you consult the instructions for use.

Safety instructions

Warning!

• When using battery-operated appliances, basic safety instructions must always be followed to reduce the risk of fire, electric shock and personal injury.
• Do not use the appliance near bathtubs, showers, basins or other vessels containing water.

Read the entire manual carefully before use. The intended use is described in this manual. The use of any accessory or the performance of any operation with this appliance other than recommended can cause a risk of personal injury.

• Keep this manual for future reference.
  Children should be supervised to ensure that they do not play with the appliance.
• The use of this appliance by children or persons with a physical, sensory, mental or motorial disability, or lack of experience and knowledge can give cause to hazards. Persons responsible for their safety should give explicit instructions or supervise the use of the appliance.

Use

Always be careful when using the appliance.

• Do not use the appliance outdoors.
  Always protect the appliance from water or excessive humidity.
• Do not operate the appliance if your hands are wet. Do not operate the appliance if you are barefoot.

Do not touch moving parts. Keep long hair and loose clothing away from the moving parts.

Carefully guide the mains cable to make - sure that it does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.

Never pull the mains cable to disconnect the mains plug from the mains. Keep the mains cable away from heat, oil and sharp edges.

If the mains cable becomes damaged. during use, immediately disconnect the mains plug from the mains. Do not touch the mains cable before disconnecting the mains plug from the mains.

Safety of others

Do not allow children or any person unfamiliar with these instructions to use the appliance.

Do not allow children or animals to come near the work area. Do not allow children or animals to touch the appliance or mains cable. Close supervision is necessary when the appliance is used near children.

After use

Switch off the appliance and let the appliance cool down before leaving it unattended and before replacing, cleaning or inspecting any parts of the appliance. Store the appliance in a dry place when not in use. Make sure that children do not have access to stored appliances.

Inspection and repairs

Before use, check the appliance for damaged or defective parts. Inspect the appliance for breakage of parts, damage to switches and other conditions that can affect the operation.

Do not use the appliance if any part is damaged or defective.

Have any damaged or defective part - repaired or replaced by an authorised repair agent.

Never attempt to remove or replace any parts other than those specified in this manual.

Before use, check the mains cable for wear or damage.

Do not use the appliance if the mains cable or mains plug is damaged or defective. If the mains cable or mains plug is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.

Safety instructions for hair clippers

Before use, make sure that the hair is fully dry.

Before use, make sure that the clipping head and the comb attachments are free of hair and dirt.

If you use the appliance on your own hair, use one or more mirrors to enhance visibility. If you use the appliance on the hair of another person, make sure that the person is seated at eye level.

Do not immerse the appliance in water or other liquids. If the appliance is immersed in water or other liquids, do not remove the appliance with your hands. If the appliance is immersed in water or other liquids, do not use the appliance again.

Always protect the charging adapter from water or excessive humidity. Do not immerse the charging adapter in water or other liquids. If the charging adapter is immersed in water or other liquids, do not remove the charging adapter with your hands. If the charging adapter is immersed in water or other liquids, do not use the charging adapter again.

Description (fig. A)

Your 535599 Princess hair clipper has been designed for clipping hair.

1. On/off switch
2. Switch for cutting/thinning hair
3. Adjustment wheel for hair length
4. Clipping head
5. Handgrip
6. Charging indicator
7. Charging station
8. Charging adapter
9. Comb attachment (cutting hair)
10. Comb attachment (thinning hair, beards, and sideboards)
11. Cleaning brush
12. Oil

Initial use

Clean the appliance.

Refer to "Cleaning and maintenance".

Clean the accessories.

Refer to "Cleaning and maintenance".

Charge the appliance.

Refer to "Charging the appliance".

Apply a few drops of oil to the teeth of the clipping head. Switch the appliance on and off again to distribute the oil. Remove excessive oil from the clipping head with a cloth.

Assembly

Warning! Before assembly, always switch off the appliance.

Mounting and removing the clipping head (fig. B1 & B2)

To mount the clipping head (4), insert the clipping head into the appliance as shown and press the clipping head until it locks into place (fig. B1).

To remove the clipping head (4), press the clipping head as shown and push the clipping head forward (fig. B2).

Mounting and removing the comb attachments (fig. C)

The appliance is supplied with two comb attachments. Comb attachment (9) is used for cutting hair. Comb attachment (10) is used for thinning hair, beards and sideboards.

To mount the comb attachment, slide the comb attachment over the clipping head (4) into the slots (13).

To remove the comb attachment, slide the comb attachment away from the clipping head (4).

Use

Charging the appliance (fig. D)

Before first use, the appliance must be fully charged for approximately 10 hours. If the appliance starts to operate less smoothly, the appliance must be fully charged for approximately 8 hours.

Caution! Do not charge the appliance near bathtubs, showers, basins or other vessels containing water.

Place the appliance in the charging station (7).

Insert the adapter plug (14) into the adapter · plug connection (15).

Insert the charging adapter (8) into the wall - socket. The charging indicator (6) illuminates red.

If the charging process is completed, the - charging indicator (6) will remain illuminated red.

This is normal operation and will not affect the charging capacity.

If the appliance has been charged completely, remove the charging adapter (8) from the wall socket.

Setting the operating mode (fig. A)

To cut hair, set the switch (2) to the "CUT" position.

To thin hair, beards and sideboards, set the switch (2) to the "THIN" position.

Setting the hair length (fig. A)

The adjustment wheel (3) can be used to set the required hair length. The adjustment wheel (3) can be set to 9 positions.

Turn the adjustment wheel (3) to set the required hair length.

Switching on and off (fig. A)

To switch on the appliance, set the on/off switch (1) to the "ON" position.

To switch off the appliance, set the on/off switch (1) to the "OFF" position.

Hints for use

Comb the hair. Make sure the hair is free from knots and tangles.

• Set the operating mode.
• Set the hair length.
  If necessary, mount the required comb attachment.
• Switch on the appliance.
• Only remove a small patch of hair at a time. Regularly comb the hair into the required - hairstyle.
  Use a towel to protect the neck.

To clip the hair in the neck, use the appropriate comb attachment and hold the appliance with the clipping head facing upwards. Gently place the clipping head against the head with the teeth of the comb attachment facing upwards. Gradually move the clipping head upwards. Start clipping hair from the bottom to the top in the middle of the neck and slowly proceed to the sides of the neck.

To clip the hair on top of the head, use the appropriate comb attachment and gradually move the clipping head from back to front against the direction of growth of the hair.

For longer hair, use a comb to keep the hair straight above the head. Hold the appliance with the clipping head above the comb. Gradually clip the hair by reducing the distance between the comb and the head.

Regularly use the comb to check whether there are uneven locks of hair and to comb out loose hair.

For an accurately finished haircut, remove the comb attachment and turn the clipping head over (bottom-up) to reach the bottom of the neck, the sides of the head, and the section around the ears. Set the adjustment wheel for the hair length to the lowest position. Hold the clipping head at a right angle against the head with the teeth of the clipping head lightly touching the skin.

Gradually move the clipping head upwards to produce as smooth a result as if using a razor.

For a layered haircut, comb the hair as usual and divide the hair from the back of the head into three equal parts. Fix the two upper layers with pins to prevent the layers from being clipped while clipping the bottom layer. Set the adjustment wheel for the hair length to the required position. Use the appropriate comb attachment in combination with a styling comb to clip the hair.

To thin hair, beards and sideboards, use the appropriate comb attachment and set the adjustment wheel for the hair length to the required position.

After use, switch off the appliance and wait until the appliance has cooled down.

Cleaning and maintenance

Warning!

• Before cleaning or maintenance, always switch off the appliance.
• Do not immerse the appliance in water or any other liquids for cleaning.

Caution!

• Do not use aggressive or abrasive cleaning agents to clean the appliance.
• Do not use sharp objects to clean the appliance.

Regularly check the appliance for possible damage.

Regularly apply a few drops of oil to the teeth of the clipping head.

Clean the clipping head and the comb - attachments with the cleaning brush after each use.

Store the appliance in the charging station when not in use.

Disclaimer

Subject to change; specifications can be changed without further notice.

Felicitations!

Stall in harlangden.

Om nödvändigt, montera önskat kamtilbehör.
Starta apparaten.

(A J K L)
Princess	535599
	.1
	.2
	.3
	.4
	.5
	.6
	.7
	.8
	.9
	.10
	.11