BY-HS mini - Hair Straightener BE YOU - Free user manual and instructions
Find the device manual for free BY-HS mini BE YOU in PDF.
User questions about BY-HS mini BE YOU
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Hair Straightener in PDF format for free! Find your manual BY-HS mini - BE YOU and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BY-HS mini by BE YOU.
USER MANUAL BY-HS mini BE YOU
Thank you for choosing this BEYOU product. BEYOU products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.
We're confident your new device will be a pleasure to use every day!
Welcome to ELECTRO DEPOT.
Table of Contents

Parts Specifications

Before first use Use

Cleaning and maintenance Storage
To get the best out of your new appliance, please read this user guide carefully before using it for the first time. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.
Parts
A Aluminum plate
B Power light indicator
Lock switch
D ON/OFF switch
E Upper and lower body
F Power cord with plug
Advanced heating component
- On/off switch
Power light indicator
190°C temperature range
360 free swivel power cord
Specifications
| Rated supply: | 110-240V ~, 50-60Hz |
| Rated power: | 25 W |
| Stand-by power: | 0 W |
| Electric protection class: | Class II |
| IP: | - |
| T°C range: | 190°C |
| Cable length: | 175 cm |
| Product weight: | 152 g |
| Pre-heating time: | 180 s |
Before first use
When plugged in for the first time, the unit may temporarily produce a faint odour or smoke. This normal occurrence does not pose any risk to the user or indicate that the unit is faulty. Before first use, turn on the unit and wait until the initial smoke of the internal lubricant has cleared. This should take approximately 1 minute.
Use

WARNING: Risk of burns!
- The unit becomes very hot within a few seconds. Always keep the plates and hot surfaces away from skin, face, and scalp to avoid burns.
Always handle the unit by holding the insulated handle.
The unit becomes hot during use and is subject to residual heat after use.

NOTE:
-
For best results, your hair should be clean, completely dry, and free from hairspray or other products.
Comb your hair to remove any tangles before straightening. -
Place the straightener on a flat, stable and heat resistant surface.
-
Slide the Lock switch backward to unlock and open the plates.
- Plug the unit into a mains socket.
- Slide the Power switch to the "I" position to turn the unit on. The Power indicator light will turn on to indicate that the unit is on.
- Allow the unit to heat up for 3 minutes (190^) .
- Separate a small section of hair (about 5 cm wide).
- Place the section between the plates, close the plates near the roots and slowly glide the straightener towards the ends. Move the straightener continuously at all times, passing the straightener over a strand within 5 seconds to prevent burning the hair.
- Leave the section to cool for approximately 20 seconds, then repeat once if necessary.

CAUTION!
Do not straighten the same section of hair more than once or twice to avoid overdrying and damaging your hair.
- Repeat the process to straighten the rest of your hair.
- Do not comb or brush your hair before it cools.
B Product usage
- Once you have finished using the unit, slide the Power switch to the "0" position to turn it off and unplug the unit from the mains socket. The indicator light will turn off when the unit is off.
- Unplug the unit after each use and before leaving it unattended. Allow the unit to cool completely before cleaning or storing.
- To lock the plates for storage, close the plates and slide the Lock switch forward.

WARNING:
The hair straightener belongs to high-temperature electrical appliances, do not touch the heating plate with your hands.

NOTE:
- When using, it is important to keep the hair straightener moving and not resting on the hair.
- Do not clamp too much or too thick hair each time, otherwise the straight hair effect will not be good.
Cleaning and maintenance
- This appliance is intended for household use. Unplug product before cleaning. The product must be cleaned only when cool.
- Use a soft non-abrasive cloth that is slightly dampened with water to wipe styling barrel surface. Do not allow water or any other liquid to get into the handle of the straightener. Any other servicing should be performed by a qualified service center.
- The product should not be stored while hot or plugged in. When not in use, allow hair straightener to cool, then simply put back in the box and store out of reach of children in safe, dry location. Never wrap the cord around the hair straightener. This could cause the cord to wear prematurely and break.
Storage
- Always unplug the unit before storing it.
- Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
- Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.
Merci!
This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.
*proof of purchase required.
EasyManual