BY-LSH - Shaver BE YOU - Free user manual and instructions

USER MANUAL BY-LSH BE YOU

Thank you for choosing this BEYOU product. BEYOU products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.

We're confident your new device will be a pleasure to use every day!

Welcome to ELECTRO DEPOT.

Table of Contents

Parts

Product overview

Intended use

Specifications

Before first use

Charging

Operation

Cleaning and maintenance

A Product overview

Before using the unit, carefully read this manual along with the RegulatoryWarnings booklet. Keep these instructions for future reference and pass them on to possible new owners of the unit.

Parts

Shaving head (with shaving foil and dual-sided trimmers)

USB charging socket

Head release button

Trimming comb

Control button with status indicator light

Cleaning brush

Main unit

USB Cable (Type-C)

Product overview

• Unpack the product. Remove all the labels from the product. Check that it is complete and in a good condition. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
• Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

• This product has been designed for shaving and must not be used for any other purpose. The unit is intended for household use only and may not be used for commercial purposes. Any other use may damage the unit or cause injury.

NOTE: The appliance can only be used without cord.

Specifications

Batteries:	600mAh
Charging time:	90mins
Battery lifetime:	90mins
Power supply:	5V DC 1.0A
Waterproof:	IPX 7

B Product usage

Before first use

• Clean the unit before first use ( CLEANING AND MAINTENANCE).
  Unwind the charging cable to its full length and make sure it is undamaged.
  Fully charge the shaver before use for optimal performance.

Charging

Before first use or if the unit has not been used for several months, fully charge the unit. Charging time is approximately 90 minutes. A full charge can provide 90 minutes of use. Recharge the unit when the rechargeable battery is low.

1. Turn off the unit.
2. Connect the USB cable to the charging socket on the bottom of the unit.
3. Connect the other end of the USB cable to a USB power adapter, then plug the adapter into a mains outlet. The indicator light on the control button will start to flash when the battery of the unit is charging, and will turn off when the battery is fully charged.
4. Once fully charged, unplug the adapter from the mains outlet and remove the USB cable.

NOTE:

The unit cannot be turned on while charging.
- Fully charge the rechargeable battery of the unit at least every 4 months if the unit will not be used for a long time.

Operation

1. Align the shaving head with the top of the main unit and push the shaving head in until it clicks into place.
2. To turn the unit on, press the Control button and select one of the three settings. The indicator light will turn on when Low or High speed is selected.

On - Low speed,
High speed,
- Off.

1. Use the shaving head to shave hairs in your legs, underarms, and body hair. The dual-sided trimmers allow you to cut longer hairs in both directions, moving them toward the blades, while the shaving foil trims hair close to the skin. When shaving sensitive areas, stretch the skin taut and then glide the shaving head slowly with light pressure.
2. You can attach the trimming comb to the shaving head to trim body hair or the bikini area to a length of 3mm . To attach the trimming comb, turn off the unit first.
3. Once you have finished using the unit, press the Control button to turn the unit off. The indicator light will turn off.
4. To remove the shaving head, press and hold the head release button on the back of the unit.

Cleaning and maintenance

WARNING: Risk of electric shock or injury!

• Do not immerse the unit, power cable or plug in water or any liquid.

Important: Do not use solvents, chemical or abrasive cleaning agents, wire brushes, sharp objects or scouring pads to clean the unit or its accessories to avoid damage.

1. Clean the unit and accessories after each use.
2. Turn off the unit.
3. Remove the trimming comb.
4. Press and hold the release button on the back to remove the shaving head from the main unit.
5. Use the cleaning brush to remove hairs and debris from the top of the main unit and shaving head.
6. Wipe the main unit with a soft cloth moistened with water or soapy water. Dry thoroughly with a soft, clean cloth.
7. Rinse the shaving head under the tap. Shake off excess water, dry thoroughly with a soft, clean cloth, and allow to air dry completely.
8. Wash the trimming comb in soapy water, rinse and dry thoroughly.
9. Store the unit and its accessories in a safe place. KEEP OUT OF THE REACH OF CHILDREN.

Merci!

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

*proof of purchase required.

CONDITION DE GARANTIE

FR