AB01.2 - Hot air brush BE YOU - Free user manual and instructions

USER MANUAL AB01.2 BE YOU

Thank you for choosing this BEYOU product. BEYOU products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.

We're confident your new device will be a pleasure to use every day!

Welcome to ELECTRO DEPOT.

Table of Contents

Product overview

Parts

Product overview

Intended use

Specifications

Product usage

Use

Tips

Cleaning and maintenance

Cleaning and maintenance

Storage

Parts

Brush attachments

D Power switch

B Concentrator nozzle

E Main unit

Hairbrush release button

F Swivel cord with power plug

Product overview

• Unpack the product. Remove all the labels from the product. Check that it is complete and in a good condition. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
• Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

This hot brush has been designed to dry and style hair.
Any other use may damage the unit or cause injury.

Specifications

Model:	988027 BY-AB01
Operating voltage:	220-240 V~, 50/60 Hz
Power consumption:	1000 W
Protection class:	Class II

Use

CAUTION!

The concentrator nozzle and brush attachments can become very hot during use! Do not touch them!

Drying hair

1 Connect the power plug to a compatible mains socket.
Use the concentrator nozzle whenever you would like to concentrate the airflow power to small areas (like a curl or a wave) or if you are going for looser curls. Connect the concentrator to the unit by simply snapping it into place. Remove it by pulling it off.
Switching on the unit: Move the switch to the I or II position.

"Cool Shot" function (cool air): Move the switch to the C position to style and gently dry almost dry hair. This will ensure a maximum shine.

Adjustments	Function
I	Slow speed and a low heat level
II	High speed and a high heat level
0	Switching the unit off

C "Cool Shot" function (cool air)

Always direct the airflow towards the hair and not the scalp.
- To avoid overdrying your hair, do not concentrate the heat on one section for an extended period of time.

After use, move the switch to the 0 position. Unplug the unit from the mains.

Styling hair

• Snap the hairbrush in place onto the main unit.

1 Connect the power plug to a compatible mains socket.
2 To turn on the unit: Move the switch to the desired setting.
Hold the main unit in your hand and use the brush to dry and style your hair.

B Product usage

• To turn off the unit: Move the switch to the 0 position after use.
  Unplug the power plug from the mains socket.

To remove the hairbrush attachment: Press the button to release the brush. Pull to detach it from the main unit.

Tips

Curling hair

• Start by gently brushing the hair from the bottom, then rotating the hairbrush to curl the ends.

Note: Grab a section of hair and start curling it towards the middle. Then slowly glide the brush towards the tips to create a rounded effect.

Adding volume to the top of the head

• Use the hairbrush at the top of your roots, wherever you would like to create volume. For a better hold, use hairspray before styling your hair.

Note: To make styling easier, hold your hair with your other hand.

Adding volume and movement to your fringe

• Slide the hairbrush either under or over your fringe.
• Slide the brush forwards, then gently towards the ends.
• To create a side-swept fringe: Hold the brush in an upright position and roll/slide the hair towards the back of the head.

Cleaning and maintenance

WARNING

• Before cleaning or maintaining the unit, make sure that it has been switched off and unplugged from the mains socket. Then let it cool completely.

• Never immerse the unit in water or any other liquid.

• Clean the unit with a soft, slightly damp cloth. Make sure that no moisture gets inside the unit while cleaning it.

• Never use corrosive cleaners, wire brushes, abrasive scouring pads, metal or sharp tools to clean your unit.
• Thoroughly dry the unit after cleaning it.

Storage

• Always unplug the unit before storing it.
• Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
• Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

Bedankt!

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

*proof of purchase required.

NL

GARANTIEVOORWAARDEN