BY-HB - Hot air brush BE YOU - Free user manual and instructions

USER MANUAL BY-HB BE YOU

Thank you for choosing this BEYOU product. BEYOU products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.

We're confident your new device will be a pleasure to use every day!

Welcome to ELECTRO DEPOT.

Table of Contents

Parts

Product overview

Intended use

Specifications

Use

Cleaning and maintenance

Storage

Parts

A Hair brush with airflow vents
B Handle
C Power switch with LED indicator lights
D 360^ swivel power cable and plug
E Hook

Product overview

• Unpack and remove all labels from the unit except the nameplate. Please check that all parts are included and intact. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
• Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

This unit has been designed to dry and style hair.
Any other use may damage the unit or cause injury.

Specifications

Model: 985519-BY-HB

Rated power input: 1000 W

Rated voltage: 220-240 V , 50-60 Hz

Protection class: Class II

B Product usage

Use

The volumizing hair brush uses ionic technology to reduce frizz and create shiny, healthy-looking hair.

NOTE: For best results, your hair should be clean, relatively dry (i.e. towel dried), detangled, and free from any hair products such as hairspray, gel or cream.

WARNING:

• Keep the vents of your volumizing hair brush clear at all times and free from hair.
• Keep the volumizing hair brush moving, particularly when near the scalp, to avoid burns or over drying the hair.

1 Connect the plug to a mains socket.
Power on: turn the power switch to the desired setting. The LED indicator light(s) will illuminate:

Power switch setting	No. of Indicator lights illuminated	Description
0	0	Off
1	2	High power with warm air – great for finalizing a hair style.
11	2	Low power with hot air – good for fine or thin hair and finalizing a hair style.
111	4	High power with hot air – perfect for thick or coarse hair.

Grasp a small section of hair.

Brush slowly and gently from the top to the bottom.
Brush each section for several seconds.
- Do not hold the brush in the same position for more than 2-3 seconds.

Power off: turn the power switch to the off position 0 and remove the plug from the mains socket.

Styling tips:

Always towel dry to remove excess water and comb hair to remove any knots.
- For quick styling, dampen hair with a fine mist of water and then style.

B Product usage

• When creating curls or waves, dry the hair on the warmest setting lll and then finish styling using the low power setting ll or high power with warm air setting I to set the hair style.
• To curl ends inwards, hold for 2-3 seconds on a low setting II or III at the point you wish to curl the hair and then rotate the brush inwards. Similarly, to curl ends outwards, rotate the brush outwards.
  Make sure hair is completely dry for a longer-lasting hair style.

Cleaning and maintenance

WARNING!

• To prevent the risk of electrocution or burns, always turn off the unit, unplug it from the mains supply and allow to cool completely before cleaning.
• Never immerse the main unit or power cable and plug in water or any other liquid. Never rinse them under the tap.

NOTE: Never use solvents, chemical or abrasive cleaning products, wire brushes, sharp objects or scouring pads to clean the unit.

• Remove any hair that has become caught in the bristles.
• Clean the unit with a soft, slightly damp cloth.
• Thoroughly dry the unit after cleaning.

Storage

• Always unplug the unit before storing it.
• Never wrap the power cable around the unit.
• Store the unit in a fresh, dry and dust-free place, away from direct sunlight, and out of the reach of children and pets.
• Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

Merci!

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

*proof of purchase required.

CONDITION DE GARANTIE

FR