BY-HVC02 - Hair Straightener BE YOU - Free user manual and instructions

Product type	Hair straightener
Brand	BE YOU
Model	BY-HVC02
Model number (reference)	977929
Power supply voltage	100-240 V~, 50/60 Hz
Power consumption	45 W
Protection class	Class II
Temperature range	120 °C to 220 °C
Temperature setting	By +/- buttons (in increments)
Plate coating	Ceramic
Display	LCD (temperature display)
Plate locking device	Yes
Button lock	Yes (long press on -)
Auto shut-off	After 1 hour
Heating time	Approximately 1 minute
Power cord	With plug, length not specified
Plate material	Ceramic
Weight (estimated)	Approximately 400 g
Dimensions (estimated)	Approximately 30 x 4 x 3 cm
Maintenance	Clean with a slightly damp soft cloth
Safety	Do not immerse in water; unplug before cleaning
Warranty	2 years (upon presentation of receipt)

Frequently Asked Questions - BY-HVC02 BE YOU

How to turn on the BY-HVC02 straightener?

Press the power button (①) for 1 second to turn on. The LCD screen lights up and flashes until the programmed temperature is reached.

How to set the temperature?

Use the + and - buttons to adjust the temperature. The default setting is 180 °C. The range is from 120 °C (fine hair) to 220 °C (professional styling).

What if smoke comes out during first use?

That's normal. The device may emit smoke and a slight odor for about 1 minute. Let it run until it dissipates. This does not indicate a defect.

How to lock the buttons to prevent accidental adjustment?

Press the (-) button for 1 second to lock all buttons. To unlock, press (-) again for 1 second.

Does the straightener turn off by itself?

Yes, the device has an auto shut-off after about 1 hour of inactivity. To turn it off manually, hold down the power button until the display turns off.

What types of hair can be straightened?

The straightener is suitable for all hair types. Adjust the temperature: 120-140 °C for fine or colored hair, 160-180 °C for normal hair, 180-220 °C for professional styling.

How to clean the straightener?

Unplug and let it cool completely. Clean with a slightly damp soft cloth. Never immerse in water and do not use abrasive products.

Can I use the straightener on wet hair?

No, for best results, hair should be clean and relatively dry. Also avoid using hairspray or cream before straightening.

How to store the appliance?

Always unplug before storing. Store in a cool, dry, clean place, out of reach of children. Use the original packaging if not using for a long time.

What if the straightener does not heat up?

Check that the appliance is plugged in and the power button is pressed for 1 second. Make sure the temperature is not set too low. If the problem persists, contact customer service.

USER MANUAL BY-HVC02 BE YOU

Thank you for choosing this BEYOU product. BEYOU products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.

We're confident your new device will be a pleasure to use every day!

Welcome to ELECTRO DEPOT.

Table of Contents

Product overview

Parts

Product overview

Intended use

Specifications

Product usage

Use

Cleaning and maintenance

Cleaning and maintenance

Storage

Parts

A Temperature control (+ / - )

D Ceramic plate-locking device

B LCD screen

E Power cable with plug

C Power button (①)

F Ceramic-coated plates

Product overview

• Unpack the product. Remove all the labels from the product. Check that it is complete and in a good condition. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
• Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

This unit has been designed to straighten hair.
Any other use may damage the unit or cause injury.

Specifications

Model:	977929
Operating voltage:	100-240 V~, 50-60Hz
Power consumption:	45 W
Protection class:	Class II

Use

WARNING!

When plugged in and used for the first time, the unit may temporarily produce a faint odour. This normal occurrence does not pose any risk to the user or indicate that the unit is faulty.

When using the unit for the first time, leave it switched on until the smoke has cleared. This should take approx. 1 minute.

Note : For best results, your hair should be clean, relatively dry and free from any hairspray or cream.

Unlock the unit by pressing the ceramic plate-locking device.
Plug the unit into an electrical socket.
3 Power on: press and hold ① for 1 second.
Press + / - to adjust the temperature.

• The LCD screen will turn on.
• The screen will continue to flash until the set temperature is reached.
• The default temperature setting is set at 180^ .
• The unit will be ready for use after 1 minute.

To activate the lock function:

• Press and hold (-) for 1 second.
• All the buttons are locked.
• Press and hold (-) again for 1 second to unlock the buttons.

Hair type	Temperature setting
Fine, porous, dyed, bleached	120°C - 140°C
Normal (for straighteners)	160°C - 180°C
Professional hairdressing	180°C - 220°C

B Product usage

5 Separate a section of hair - approx. 5 cm wide - then smooth it with a brush.
Position the chosen section between the plates and the straightener, then close the plates. Do not touch the hot plates.
Glide the straightener down the hair from the roots to the tips for 5 seconds. Continuously move the straightener at all times to prevent it from burning the hair.

• Leave the section to cool for approx. 20 seconds, then repeat this step until the desired hairstyle is obtained.
• Do not comb or brush your hair before it cools.

WARNING!

Do not straighten the same section of hair more than once when the unit is set to the maximum temperature.

8 Shutdown: press ① until the LCD screen turns off.

Auto shut-off: the unit will switch off automatically after approx. 1 hour. Unplug the power plug from the mains socket.

Cleaning and maintenance

WARNING

• Before cleaning or maintaining the unit, make sure that it has been switched off and unplugged from the mains socket. Then let it cool completely.

• Never immerse the unit in water or any other liquid.

• Clean the unit with a soft, slightly damp cloth.
  Make sure that no moisture gets inside the unit while cleaning it.

• Never use corrosive cleaners, wire brushes, abrasive scouring pads, metal or sharp tools to clean your unit.
• Thoroughly dry the unit after cleaning it.

Storage

• Always unplug the unit before storing it.
• Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
• Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

Bedankt!

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

*proof of purchase required.

NL

GARANTIEVOORWAARDEN