Double Strob - Strobe light BOOMTONEDJ - Free user manual and instructions

USER MANUAL Double Strob BOOMTONEDJ

1- Safety Instructions

Please read the instructions carefully which includes important information about the installation, operation and maintenance.

• Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure that they also receive this instruction booklet.
• Unpack and check carefully there is no transportation damage before using the fixture.
  It's important to ground the yellow/green conductor to earth in order to avoid electric shock.
• Disconnect main power before servicing and maintenance.
• Maximum ambient temperature is Ta : 40^ . Don't operate it where the temperature is higher than this.
• In the event of serious operating problem, stop using the fixture immediately. Never try to repair the fixture by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. There are no user serviceable parts inside the fixture.
• Do not connect the device to any dimmer pack.
• To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or moisture.
• Do not look directly at the LED light beam while the fixture is on.
• Do not touch any wire during operation.
• The unit should be mounted via its screw holes on the bracket. Always ensure

that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit's weight. Also always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.

• The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people and has no one pass by or under it.

This BoomToneDJ fixture is complying with European standards:

3- Technical Specifications

1. Power supply: AC220-240V 50/60Hz
2. Power consumption: 40W max
3. Light Source : 2 LED white COB of 20W
4. Operation mode : Auto, sound Activated
5. Dimension: L200 × w65×H80mm
6. Weight: 0.58kg

4-Play mode

Use in AUTO or SOUND mode

For use in sound mode, turn knob 1 to adjust the sensitivity. This is a button with a notch (click) to turn off the function. When this sound detection function is off, the product is in AUTO mode with the possibility of adjusting the speed of the flashes with the rotary button 2.

Be careful if the mode is active, we do not know how to adjust the speed of the flashes and the flashes will be activated to the rhythm of the music.

5. Fixture Cleaning

The cleaning of internal must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the fixture's optics.

• Clean with soft cloth using normal glass cleaning fluid.
  Always dry the parts carefully.
• Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days

www.boomtonedj.com