UM 3644 - CLATRONIC - Free user manual and instructions

USER MANUAL UM 3644 CLATRONIC

Instruction Manual Thank you for choosing our product. We hope you will enjoy using the appliance. Symbols in these Instructions for Use Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine: WARNING: This warns you of dangers to your health and indicates possible injury risks. CAUTION: This refers to possible hazards to the machine or other objects. NOTE: This highlights tips and information.

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including

the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. • Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. • The device and the mains lead have to be checked regularly for signs of damage. If damage is found the device must not be used. • Use only original spare parts. • In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach. WARNING: Do not allow small children to play with the foil. There is a danger of suffocation!

Special Safety Instructions for this Device

Risk of cuts! The mixer blades are sharp! Always use the appliance with the lid on. Do not remove the lid during operation! Do not reach into the mixing container during operation! You could be hurt by the rotating knives. Before replacement of accessories or additional parts which move during operation, the device must be switched off and cut off from the mains. Always check that the accessories are seated solidly and securely before switching the device on. CAUTION: Ensure that the blender is switched off before removing it from the stand. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

• Do not try to repair the appliance on your own. Always contact an authorized technician. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • This appliance shall not be used by children. • Keep the appliance and its cord out of reach of children. • Children shall not play with the appliance. • Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. • This device must not be immersed in water for cleaning. Please follow the instructions provided in chapter “Cleaning”. • Do not use the appliance if the mixing vessel is empty. • Do not operate the appliance for more than 3 minutes. Allow it to cool for around 1 minute before using it again. • The machine should only be used under supervision. • Do not manipulate any of the safety switches! • Objects like spoons or scrapers never may be in the mixing vessel during operation. Unpacking the Device 1. Remove the device from its packaging. 2. Remove all packaging materials like foils, filling materials, cable holders, and carton packaging. 3. Check the scope of deliveries for completeness. NOTE: There may still be dust or production remains on the device. We recommend that you clean the device as described under “Cleaning”.

Overview of the Components

Refill opening cap / measuring cup

Mixing vessel lid with refill opening Mixing vessel Knife block Base section with motor Setting switch

Mixing Vessel Set the mixing vessel inclined onto the motor housing and turn it in clockwise direction to tighten it (refer to the illustration). The mixing vessel can be set in 4 positions. Lid 1. Press the lid firmly onto the mixing vessel. It must seal the mixing vessel completely. 2. Insert the cap into the refill opening of the lid. Tighten the cap by turning it clockwise. NOTE: The refill opening cap can also be used as a measuring cup.

CAUTION: The glass may crack if the temperature is too high! DO NOT fill with liquids above 60 °C. • Place the device on a firm and flat surface. Position it is such that it cannot tip over. • Only switch on the appliance if the mixing vessel is closed with the lid. The refill opening in the lid must also be closed. • Do not overfill the mixing vessel! You can fill it to a maximum of 1.5 liters. Use the scale on the jug. • Froth requires a large capacity. Reduce quantities of liquids which produce a lot of froth. • Keep one hand on the lid if you are crushing ice or if there is a large quantity of ingredients. • Cut the food to be mixed into small pieces beforehand. Electric Connection • Before inserting the power plug into the outlet, check that the mains voltage to be used matches that of the device. You can find the required information on the nameplate. • Connect the device only to a correctly installed safety socket. Short-interval Use The appliance is suitable for short-time operation of max. 3 minutes. Let it cool for 1 minute before using it again!

Switch to pulse mode by turning the control to the “P” position and then release it. Use the appliance in this operating mode for a maximum of 3 minutes. Let it cool for 1 minute before using it again! Crushing Ice Cubes The blades in the mixing vessel are also suitable for crushing ice cubes. • Put a maximum of 10 pieces (size approx. 25 x 25 x 25 mm) into the mixing vessel. Use pulse operation “P” for 1 - 3 seconds. Repeat the process 8 - 12 times. • When adding fluid, you can use the “2” setting for 1 - 2 minutes.

Preparation 1. Ensure that the function switch is in the “0” position. 2. Place the mixing vessel in position. 3. Now put the ingredients that are to be mixed into the mixing vessel. 4. Put the lid on. 5. Close the refill opening with the cap. Mixing Operation is carried out with the setting control: Level 0 = off Level 1 = low rpm Level 2 - 3 = medium speed Level 4 = high rpm P = High speed in pulse mode Adding further Ingredients to be mixed Items to be mixed or spices can be fed in through the filling aperture. • Please switch off the machine before doing so. • Before you switch the device on again, close the opening. Stopping Operation 1. Turn the switch to the “0” position. 2. Wait until the blade comes to a complete stop. 3. Remove the mains plug from the socket. 4. Remove the mixing vessel. Turn it anticlockwise. 5. Take off the lid before pouring. IMPORTANT NOTE: Citrus juices and food containing acids should never be stored in metal vessels.

WARNING: • Always remove the plug before cleaning. • Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise this might result in an electric shock or fire. • The blades on the knife block are very sharp. A risk of injury exists! CAUTION: • Do not use a wire brush or any abrasive items. • Do not use any acidic or abrasive detergents. • The individual parts are not dishwasher-safe. NOTE: Preliminary Cleaning Fill the mixing vessel halfway with water. Operate the appliance for approx. 10 seconds. For thorough cleaning, please remove the mixing vessel. Mixing Vessel, Lid and Measuring Cup Clean these parts in a bowl of hot water. Then dry everything before assembling the parts again. Housing Only a moderately moist cloth should be used for cleaning the outside of the device.

Problem The device is not working.

The device is not connected to mains power. Wrong switch setting. The device is fitted with a safety switch. This prevents the motor from starting up unintentionally. The overheating protection has been activated. The motor is too hot.

Check the mains connection. Check the position of the rotary switch. Check that the mixing vessel is firmly in place.

1. Immediately turn the switch to the position “0”.

Disconnect the mains plug from the wall socket. 2. Let the appliance cool down for at least 15 minutes before switching it on again.

The right to make technical and design modifications in the course of continuous product development remains reserved.

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Meaning of the “Dustbin” Symbol Protect our environment: do not dispose of electrical equipment in the domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal. This helps avoid the potential effects of incorrect disposal on the environment and human health. This will contribute to the recycling and other forms of re-utilisation of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authority.