Name: BRAVA SIMPLY FI
Brand: CANDY
Rating: 9 (252 reviews)

Question 1

What does the salt indicator light mean on the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The salt indicator light (displayed as "SL" on the screen) means that the regenerating salt reservoir is empty or low. This indicator warns you that the water softening system of your dishwasher is not functioning properly.
Consequences if you do not act:

Appearance of white spots on dishes and glasses
Poor washing efficiency
Limescale building up in the machine

How to resolve the issue:

Locate the salt reservoir at the bottom of the machine (accessible after opening the door)
Unscrew the cap
Pour in specific regenerating salt for dishwashers until full (capacity: 1.5 to 1.8 kg)
Add water until it overflows (this is normal)
Clean the threads to remove salt residues
Screw the cap back on tightly
Run a full cycle to activate the regeneration system

Important: Use only regenerating salt intended for dishwashers. Do not use table salt as it would damage the softening system.

Question 2

How to clean the filters of the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The CANDY BRAVA SIMPLY FI dishwasher features a self-cleaning triple filtration system that requires only regular and simple maintenance.
After each wash cycle

Central reservoir: Completely empty it of accumulated food residues
Metal plate: Remove it and rinse the entire filtration system under running water

Self-cleaning microfilter

Turn the microfilter handle counterclockwise to detach it
Clean it thoroughly under tap water
Reattach it by turning clockwise until it is tight
Check frequency: every 15 days with regular use

Monthly maintenance
A complete monthly rinse of the system prevents the accumulation of residues, odors, and limescale formation.
Important: Never operate the dishwasher without having properly reinstalled all filters. The system is not designed to operate partially.

Question 3

What does error code 08 (E8) mean on the CANDY BRAVA SIMPLY FI dishwasher and how can it be resolved?

Accepted Answer

Error code 08 (or E8 / Ei) indicates that the heating element is not functioning properly or that the filter plate is clogged.

Possible causes

Defective heating element - the water heating system is no longer functioning correctly
Clogged filter plate - debris or limescale is blocking water circulation

Solutions to try

Clean the filter - Access the water inlet filter of the dishwasher and rinse it thoroughly under running water to remove limescale deposits or debris
Check the water inlet hose - Ensure that the hose is not bent, pinched, or blocked, which could reduce water flow
Restart the appliance - Unplug the dishwasher for 5 minutes, then plug it back in to reset the electronic system
Run a self-cleaning program - The BRAVA SIMPLY FI has a self-cleaning function that can help eliminate limescale build-up

If error code 08 persists after these checks, the heating element is likely defective and requires professional technical intervention. Contact CANDY customer service mentioning your model (BRAVA SIMPLY FI) and your serial number to arrange for a repair.

Question 4

Why doesn't the START button work on my Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

If the START button is unresponsive, first check these essential items:The door is properly closed and locked - It must be fully closed and make a clicking sound. This is the most common cause of the START being blocked.The appliance is turned on - Press ON/OFF for 2 seconds. The display should show two dashes (--) before START becomes active.A program is selected - You must first choose a program with the PROGRAM button before pressing START.The water tap is open - Check that the water supply tap is fully open. If water cannot flow in, START will not work and will display error E2.No delayed start is active - If you have programmed a delayed start (up to 24 hours), START is locked until the scheduled time.If it still doesn't work:Unplug the dishwasher for 5 minutes, then plug it back in to reset the electronic system. If error codes E5 to E8 appear, or if the problem persists, contact Candy customer service.

Question 5

How to solve the door problem that won't close because the display panel is inside the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

This problem usually indicates that the control/display panel has come loose from its normal position and is obstructing the door closure.

Steps to resolve the issue:

Open the door completely - Pull the door towards you as wide as possible to access the inside.
Locate and retrieve the panel - Look for the display/control panel that should normally be attached to the outside of the door. If it has come loose, gently retrieve it. Check that the connection cables are not damaged or pinched.
Clean the mounting surfaces - Wipe the area where the panel should be attached (usually on the inner perimeter of the door) to remove dust or debris.
Reinstall the panel correctly - Depending on your CANDY BRAVA SIMPLY FI model, the panel attaches either with screws or with mounting clips. Ensure it is properly aligned and securely fastened before closing the door.
Check for additional obstructions - After repositioning the panel, inspect the inside to ensure nothing else is blocking the door (misplaced basket, stuck utensil, damaged seal).

Tip: If the display panel is damaged (cracks, broken connectors) during detachment, it cannot be reinstalled correctly. In this case, contact CANDY customer service with your appliance's serial number to order a replacement part.

Question 6

Why does my Candy BRAVA SIMPLY FI dishwasher turn on and off by itself, and the control panel is unresponsive?

Accepted Answer

This problem combines two symptoms that may have common causes. Here’s how to diagnose and resolve:

1. Check if the delayed start is activated

The dishwasher may turn on automatically if you have activated the delayed start function (programming between 1 and 23 hours). To cancel it immediately, press the START/CANCEL button for 3 seconds. Check your programming to ensure no cycle is scheduled.

2. Check the Wi-Fi connection and the Simply-Fi app

If your model is connected to Wi-Fi, the Simply-Fi app may trigger automatic cycles. Ensure you have not scheduled a remote wash and that the appliance is not in Wi-Fi Simply-Fi mode with programmed start.

3. Reset the electronic system

Unintentional restarts and an unresponsive control panel often indicate a temporary failure of the electronic system:

Unplug the dishwasher completely from its power outlet.
Wait 5 minutes for the system to reset.
Plug it back in and test normal operation.

4. Clean the control panel

If the buttons are still unresponsive after the reset, gently clean the control panel with a slightly damp cloth to remove dust or moisture that may be blocking the contacts. Avoid harsh chemicals.

5. Check that the door is fully closed

Ensure that the door is completely closed until you hear a click. A poorly closed door can trigger repeated stops or restarts.

6. Contact customer service if the problem persists

If after these steps the control panel remains unresponsive and the appliance continues to restart, it is likely an electronic failure (type E7 error on this model). Contact CANDY Customer Service with your model number (BRAVA SIMPLY FI) for professional assistance.

Question 7

Why does my Candy BRAVA SIMPLY FI dishwasher turn on and off by itself, and the control panel is unresponsive?

Accepted Answer

This problem combines two symptoms that may have common causes. Here’s how to diagnose and resolve:

1. Check if the delayed start is activated

The dishwasher may turn on automatically if you have activated the delayed start function (programming between 1 and 23 hours). To cancel it immediately, press the START/CANCEL button for 3 seconds. Check your programming to ensure no cycle is scheduled.

2. Check the Wi-Fi connection and the Simply-Fi app

If your model is connected to Wi-Fi, the Simply-Fi app may trigger automatic cycles. Ensure you have not scheduled a remote wash and that the appliance is not in Wi-Fi Simply-Fi mode with programmed start.

3. Reset the electronic system

Unintentional restarts and an unresponsive control panel often indicate a temporary failure of the electronic system:

Unplug the dishwasher completely from its power outlet.
Wait 5 minutes for the system to reset.
Plug it back in and test normal operation.

4. Clean the control panel

If the buttons are still unresponsive after the reset, gently clean the control panel with a slightly damp cloth to remove dust or moisture that may be blocking the contacts. Avoid harsh chemicals.

5. Check that the door is fully closed

Ensure that the door is completely closed until you hear a click. A poorly closed door can trigger repeated stops or restarts.

6. Contact customer service if the problem persists

If after these steps the control panel remains unresponsive and the appliance continues to restart, it is likely an electronic failure (type E7 error on this model). Contact CANDY Customer Service with your model number (BRAVA SIMPLY FI) for professional assistance.

Question 8

How to adjust the regenerating salt on the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

Location of the salt containerThe salt reservoir is located at the bottom of the machine, accessible by opening the dishwasher door.Filling procedureUnscrew the cap of the reservoir located at the bottom of the appliancePour regenerating salt until the container is completely full (capacity: 1.5 to 1.8 kg)Add water until it overflows (this is normal)Clean the threads to remove salt residuesScrew the cap back on tightlyStart a complete cycle for the regeneration system to work properlyAdjusting water hardnessYour CANDY BRAVA SIMPLY FI is preset to level d4. If you notice white spots on your dishes, this indicates a lack of salt. Check with your water supplier for local hardness and adjust the levels from d0 to d7 if necessary.ImportantOnly use specific regenerating salt for dishwashers. Do not use table salt or other types of salt.

Question 9

How to adjust the feet of the CANDY BRAVA SIMPLY FI dishwasher to level it?

Accepted Answer

The PDF of this manual does not contain instructions for adjusting the feet of the CANDY BRAVA SIMPLY FI dishwasher. These steps are generally included in the installation guide provided separately upon delivery.

Here’s how to proceed with your dishwasher:

Locate the feet: The CANDY BRAVA SIMPLY FI has 4 adjustable feet located under the appliance, usually at the four corners.
Turn the feet: Each foot has a screw or threaded part. Turn them clockwise to raise the appliance, or counterclockwise to lower it.
Check the leveling: Use a bubble level placed on the top of the door. The appliance should be slightly tilted forward (0.5 to 1 cm difference between the front and back) to facilitate water drainage.
Secure after adjustment: Once leveled, secure the feet to prevent them from loosening during transport or cleaning.

If you have lost your installation guide, contact CANDY customer service or visit their official website to download the digital version of the complete installation manual.

Question 10

Where is the temperature sensor located on the Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

The PDF manual for the CANDY BRAVA SIMPLY FI does not specify the exact location of the temperature sensor. However, here is the available information and recommendations:

What we know about the model

The error code E18 on your device indicates a problem with the temperature sensor or temperature management during the wash cycle
The sensor is a critical component for regulating water temperature and ensuring effective washing

To access or replace the sensor

Refer to the installation guide provided with the delivery of your dishwasher, which contains detailed technical diagrams of the internal parts
Contact Candy customer service mentioning your model number (BRAVA SIMPLY FI) and your serial number (visible on the nameplate inside the door)
Do not attempt to intervene yourself - replacing the sensor requires technical knowledge and may affect your device's warranty

Question 11

Where is the water inlet filter of the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The water inlet filter is located at the end of the supply hose, where it connects to the water tap of your installation.
How to locate it

Turn off the appliance and close the main water tap
Go to the back of the BRAVA SIMPLY FI dishwasher
Locate the supply hose that comes out of the machine (it's the gray hose that goes up to the tap)
The filter is at the end of this hose, where it screws onto the tap - it is secured by a clamp

Filter maintenance
This small filter retains deposits and debris. To clean it:

First, close the main water tap
Gently unscrew the hose from its connection to the tap
The filter is inside the threaded connection (3/4")
Carefully remove it and rinse it under running water to remove limescale and sediments
Reassemble and screw the hose back on

Note: The CANDY BRAVA SIMPLY FI manual recommends checking this filter regularly if you have very hard water, as a clogged filter can lead to a lack of water during washing cycles.

Question 12

Where is the cancel button (CANCEL) on the CANDY BRAVA SIMPLY FI dishwasher and how do I use it?

Accepted Answer

The CANDY BRAVA SIMPLY FI dishwasher has a START/CANCEL button located on the control panel. This multifunction button is used both to start a program and to cancel the ongoing cycle.

To cancel a program during the cycle, press and hold the CANCEL button for at least 3 seconds. You will then see the display show "00" and audible signals will sound to confirm the complete cancellation. The program will stop immediately and the screen will display two dashes, indicating that the dishwasher is ready for a new program.

This CANCEL button also allows you to cancel a delayed start program (up to 24 hours). If you have set a delayed start and wish to interrupt it, simply hold the button down for 3 seconds. The cancellation will cancel both the selected program and the scheduled delay.

Note: it is advised not to open the door during program execution, especially during the central washing phases and the final rinsing. However, if you do open it, the machine will automatically stop and display the remaining time. Upon closing, the cycle will resume from where it was interrupted.

Important note: unlike the ON/OFF button which temporarily interrupts the program, the CANCEL button permanently stops the cycle and completely resets the appliance. After a cancellation, you will need to select a new program before you can restart the washing.

Question 13

How to connect the Candy BRAVA SIMPLY FI dishwasher to Wi-Fi and use the Simply-Fi app?

Accepted Answer

Yes, the Candy BRAVA SIMPLY FI dishwasher is equipped with the Simply-Fi function that allows a Wi-Fi connection to control the device remotely via a mobile app.Connection steps:Download the Candy simply-Fi app on your smartphone (available on iOS, Android, and PC)Activate the Wi-Fi on your mobile deviceLaunch the app and follow the pairing assistantPrepare: the serial number of the dishwasher, the name of your Wi-Fi network (SSID), and your Wi-Fi passwordEnter this information in the app and wait for complete synchronizationFeatures accessible via Wi-Fi:Start programs remotelySchedule a delayed startTrack the progress of the cycle in real-timeReceive notifications of wash completionView wash history and energy consumption statistics

Question 14

What does 'eco lock 3' displayed on the control panel of the Candy BRAVA SIMPLY FI dishwasher mean and how do I unlock it?

Accepted Answer

The message 'eco lock 3' displayed on your Candy BRAVA SIMPLY FI dishwasher indicates that the controls are locked. The number '3' generally corresponds to the Eco program of your appliance.

To unlock the controls and access the dashboard again:

Locate the lock button, indicated by a padlock icon on the control panel
Press and hold this button for 3 to 5 seconds
A beep confirms the unlocking
The padlock symbol disappears from the display

This control lock feature exists to prevent any unintentional changes to the programs, especially in the presence of children. If the message persists after this action, check that the lock button is not stuck or damaged.

Question 15

How to disable the control lock that was accidentally activated on the Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

The Candy BRAVA SIMPLY FI dishwasher is not equipped with a control lock function according to the official documentation. If you find that your appliance is not responding to commands, it may be due to another cause.

Checks to perform first:

Make sure the dishwasher is turned on by pressing the ON/OFF button for 2 seconds
Check that the door is properly closed (it can interrupt the program if left open)
If a program is running, press the ON/OFF button to interrupt it, then wait a few seconds before restarting
Check that the water tap is open

If no button responds:

Press the

Question 16

What does error code E7 mean on the Candy BRAVA SIMPLY FI dishwasher and how can it be resolved?

Accepted Answer

The error code E7 means "Electronic control failure" of your Candy BRAVA SIMPLY FI dishwasher. This issue affects the electronic management system of the machine, making it unsuitable for simple user repairs.

Before contacting customer service, you can try the following troubleshooting steps:

Complete restart: Unplug the dishwasher for 5 minutes to reset the electronic system, then plug it back in and try to start a wash cycle
Check the door: Ensure that the door is properly closed and locked
Check the water supply: Make sure the water supply tap is fully open

If the E7 code persists after these three checks, you must contact Candy Customer Service. A qualified technician's intervention is necessary as this is a failure of the electronic system. Before the call, gather the following information: the model number (BRAVA SIMPLY FI) visible on the machine's technical plate and the serial number (located inside the door, at the top).

While waiting for the intervention, avoid starting other wash cycles, as the faulty electronic system could cause further malfunctions or damage components.

Question 17

How to remove white marks on the glasses of the Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

White marks on your glasses are generally caused by hard water (mineral deposits). Here’s how to remove them on your CANDY BRAVA SIMPLY FI:
Priority checks:

Fill the softener salt reservoir - Capacity: 1.5 to 1.8 kg. A lack of salt prevents the softening system from functioning properly.
Check the rinse aid - The compartment should be full. Set the dosage to position 4 (scale 1-6) for optimal effect.
Check the water hardness - Your appliance is preset to level d4. Consult your water supplier for local hardness, then adjust the setting from d0 to d7 as needed.

After filling the salt, run a full cycle to allow the regeneration system to work properly. The marks should gradually disappear after subsequent washes.

Question 18

How to cancel a washing program on the Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

To cancel a running program on your Candy BRAVA SIMPLY FI dishwasher, follow these steps:

Press the STOP button (the same button as START/STOP) and hold it down for at least 3 seconds
The display will show “00” and you will hear beeping sounds confirming the cancellation
The program is then interrupted and the display will show two dashes, ready for a new setup

Important note: This procedure also cancels any ongoing delayed start.
Simpler alternative: You can also interrupt the program by simply opening the door. The machine stops automatically and displays the remaining time by flashing. Once the door is closed again, the cycle restarts automatically without needing to press a button. This method is convenient if you need to add dishes or access the dishwasher.
To stop without resuming: You can also press the ON/OFF button to stop operation. To restart the cycle from the interruption point, simply press ON/OFF again.

Question 19

Why is the dishware cold after the 24-minute program of the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

This is completely normal. The 24-minute quick program of the CANDY BRAVA SIMPLY FI dishwasher is designed to prioritize speed over temperature. Since this cycle is very short, the dishware does not have as much time to heat up and the drying is also reduced.

Here’s what you need to know:

24-minute program - suitable for lightly or moderately soiled dishware, with a short but effective cleaning cycle. The dishware may come out cold or lukewarm.
Intensive program - heats more and offers a full duration with better drying. This is the right choice if you want warmer and better-dried dishware.
Regenerating salt - check that the dosage is correct, as it influences both cleaning and drying.

Your idea of comparing it with the Intensive program is excellent and will immediately show you the difference. It’s the right instinct to find the program that meets your expectations.

Question 20

How to activate or optimize the drying mode on the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The CANDY BRAVA SIMPLY FI dishwasher does not have a separate drying mode. Drying is automatically integrated at the end of each washing program.

Drying operation

When you start a program, it includes washing, rinsing, and drying phases.
The drying phase is triggered automatically at the end of the cycle.

Tips to improve drying

You can slightly crack open the dishwasher door at the end of the cycle to promote air circulation and speed up natural drying.
Avoid opening the door during the drying phase, as this will trigger an audible signal indicating that the cycle is not complete.

"Express" option

By pressing the "Express" button, you reduce the drying time and save about 25% of time and energy.
Note that in this mode, the dishes will be less dry immediately after the end of the cycle.

Thus, drying is automatic and integrated, but you can act on the door and use the "Express" option to adjust the duration and quality of drying according to your needs.

Question 21

What programs are available on the Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

The Candy BRAVA SIMPLY FI dishwasher offers several programs suitable for different types of dishes and levels of soiling. Here are the main programs you can typically find on this model:

Eco Program: Designed for economical washing in water and energy, ideal for daily use with lightly soiled dishes.
Intensive Program: Intended for pots, pans, and heavily soiled dishes, this program uses a high temperature for deep cleaning.
Quick Program: Allows for a quick wash of lightly soiled dishes, perfect for a short cycle when you're in a hurry.
Normal Program: Standard cycle suitable for the majority of daily dish loads.
Delicate Program: Specifically designed for fragile items like glassware or porcelain, with a lower temperature and gentle wash to avoid damage.

These programs offer flexibility to meet your washing needs, optimizing water and energy consumption according to the type of dishes and the degree of soiling.

Question 22

What to do if the control panel of the CANDY BRAVA SIMPLY FI dishwasher is not working?

Accepted Answer

If the control panel of your CANDY BRAVA SIMPLY FI dishwasher is unresponsive, here are several steps to follow to try to resolve this issue:

1. Check the power supply
Make sure the appliance is properly plugged in and that the outlet is working. You can test the outlet with another electrical device to confirm.

2. Restart the dishwasher
Unplug the appliance for about 5 minutes, then plug it back in. This restart may reset the electronic system and resolve some malfunctions.

3. Inspect the control panel buttons

Check that no button is stuck or pressed down.
A stuck button can prevent the control panel from functioning properly.

4. Clean the control panel
Use a soft, slightly damp cloth to gently clean the panel. Avoid harsh chemicals that could damage the keys or the circuit.

5. Check the control panel lock
Some models have a lock function to prevent accidental presses. Make sure this function is not activated, as it could block the control panel.

If after these checks the problem persists, it may be a hardware defect requiring the intervention of a qualified technician.

Question 23

What is the fastest washing program on the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The fastest washing program on the Candy Brava Simply Fi dishwasher is "Ultra Rapid 24", which operates at 50°C and lasts exactly 24 minutes. It is the ideal program for express washing at the end of a meal.

This program is recommended for washing dishes for up to 6 people that are lightly to normally soiled. It combines speed and efficiency thanks to the IMPULSE technology used in this model, which optimizes water and energy consumption while ensuring effective washing.

If you are using tablet detergents, be aware that the "ALL IN 1" option will increase the duration of this program to about 39 minutes to allow for complete detergent dissolution and achieve the best performance. This option is particularly recommended with this type of product.

To select this program, press the "PROGRAMS" button after turning on the dishwasher (ON/OFF button). You can also activate the "EXPRESS" option to further reduce the drying time by about 25%, although this does not affect the duration of the washing cycle itself. This option is suitable for an evening wash if you do not need perfectly dry dishes immediately.

If the dishes are only lightly soiled, the "Rapid 59" program (59 minutes at 65°C) is also an excellent option for larger loads (up to 8 place settings).

Question 24

What should I do if my Candy Brava Simply FI dishwasher won't turn on?

Accepted Answer

If your Candy Brava Simply FI dishwasher won't turn on, follow these simple checks to identify and resolve the issue before contacting customer service.
Check the power supply: Start by ensuring that the appliance is properly plugged into a functional outlet. Test this outlet with another device (a lamp, for example) to confirm it is working correctly. Inspect the power cord for any visible damage or cuts. Also, check that the circuit breaker or fuse connected to this outlet has not tripped; if it has, reset it and test the appliance again.
Properly turn on the machine: On the Candy Brava Simply FI, to power on the appliance, you need to press the ON/OFF button for 2 seconds. When pressed correctly, two dashes will appear on the digital display, indicating that the machine is ready to select a program. If no display appears on the screen after this action, the problem is likely related to the power supply or an internal failure.
Check the door status and water tap: The dishwasher will not operate if the door is not properly closed and locked; close it firmly and ensure that the locking mechanism operates correctly. Also, check that the main water supply tap is fully open; otherwise, the machine will display error code E2 indicating a lack of water and will refuse to start a cycle.
Interpret the displayed error codes: If error codes appear on your Brava Simply FI display, they provide a precise indication of the problem: E2 means the water tap is closed or water supply is insufficient; E3 indicates a drainage issue (bent hose, clogged siphon, or blocked filters); E4 indicates a water leak; E5 to E7, Ef or EL point to an electronic system failure; E8 or Ei indicate that the heating element is not functioning properly or that the filter plate is clogged. The display "SL" simply means that the salt reservoir is empty, which does not prevent starting a program but affects washing quality and can cause white spots.
Contact customer service if the problem persists: If after these checks your dishwasher still does not turn on and no error code appears on the display, the problem is likely due to a failing internal component (circuit board, door switch, heating element). Contact your retailer's customer service, specifying the exact model (Candy Brava Simply FI) and the serial number of your appliance, which can be found on the technical plate located inside the door at the top or on the warranty certificate. This information will allow for a quicker and more effective diagnosis.

Question 25

Does the water inlet hose of the Candy BRAVA SIMPLY FI dishwasher need to be equipped with an Aquastop system?

Accepted Answer

The water inlet hose of your Candy BRAVA SIMPLY FI dishwasher is not necessarily equipped with an Aquastop system, but its use is highly recommended to ensure better safety.

Why use an Aquastop hose?

Leak protection: The Aquastop system automatically detects any water leak and shuts off the water supply to prevent water damage in your home.
Enhanced safety: This device limits the risk of flooding due to hose failure or improper installation.
Compliance and insurance: In some cases, insurance companies or local regulations may recommend or require the installation of an Aquastop hose.

Installation tips

Ensure that the chosen Aquastop hose is compatible with the BRAVA SIMPLY FI model.
Follow the assembly instructions to ensure the proper functioning of the system.

In summary, even though it is not mandatory, installing a water inlet hose with an Aquastop system is strongly advised to protect your dishwasher and home from leak risks.

Question 26

How to connect the water supply to a Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

To connect the water supply of your Candy BRAVA SIMPLY FI dishwasher, follow these simple steps:

1. Preparing the equipment

Make sure you have the water supply hose provided with the appliance or a compatible hose.
Check for the necessary sealing gaskets to prevent any leaks.

2. Locating the water tap
Identify the cold water tap that will supply the dishwasher. It should be easily accessible and in good condition.

3. Connecting the hose to the tap

Turn off the main water tap before starting.
Place a rubber gasket on the thread of the tap if necessary.
Screw the water supply hose onto the tap, ensuring it is tightened well without forcing it to avoid damaging the thread.

4. Connecting the hose to the dishwasher

Locate the water inlet at the back or side of the dishwasher.
Screw the other end of the hose onto this inlet, ensuring that the connection is watertight.

5. Checking the connections

Before opening the tap, check that all connections are tight.
Slowly open the tap and observe for any leaks.

6. Commissioning
Once the water supply is correctly connected and leak-free, you can plug the dishwasher into the power supply and start using it.

Following these steps ensures a secure connection and avoids issues with sealing or water supply.

Question 27

How to remove the back panel of the Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

To remove the back panel of your Candy BRAVA SIMPLY FI dishwasher, you must first unplug the appliance from the electrical outlet to eliminate any risk of electric shock. This precaution is essential before any maintenance or servicing work on the machine.
Next, gently move the dishwasher to easily access the back. You can push it forward or pull it back depending on your available space. Make sure the floor is clear and that you have enough room to perform this operation safely.
Once the back access is clear, locate all the screws that hold the panel in place. On the Candy BRAVA SIMPLY FI, these screws are generally located on the vertical edges of the back panel and sometimes on the upper and lower corners. Count them so you don’t forget any during reassembly.
Get a suitable Phillips screwdriver that fits the diameter of the screws. A poorly fitting screwdriver could damage the screw heads and complicate future reassembly. Carefully unscrew all the screws and store them in a container or on a magnetic surface for easy retrieval.
Gently pull the back panel towards you with both hands, making sure to support it properly to prevent it from falling. If the panel seems stuck, double-check that no screws have been overlooked. Slight back-and-forth movements can help it release from any seals or components that may be lightly adhering to it.
During removal, be careful of any electrical connectors or hoses that may be attached to the back. On some models, elements like the thermostat or sensors may be fixed to the back panel. If this is the case, gently disconnect them before fully removing the panel.
Handle the panel carefully once removed, as it may be bulky and fragile depending on its construction. For reassembly, simply reverse these steps, ensuring to screw all screws back in until they are firmly tightened, but without forcing to avoid damaging the threads.

Question 28

How to access the water inlet valve of the Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

To access the water inlet valve of your Candy BRAVA SIMPLY FI dishwasher, it is important to understand that this valve corresponds to the water connection tap located outside the appliance. According to the official instructions, you must first disconnect the power supply by unplugging the appliance, then completely close the main water tap that supplies the machine to avoid any leaks or flooding.

Location of the valve: The Candy BRAVA SIMPLY FI is equipped with a water supply hose with a 3/4" threaded end. This water inlet valve is located where the supply hose connects to the water tap of your installation (fig. 1B of the manual). This water tap is designed to isolate the machine from the hydraulic system when it is not in operation. There may also be a valve inside the machine, at the connection point of the supply hose at the back of the appliance.

Connection and access: The supply hose "A" screws onto the water tap "B" using the 3/4" attachment, ensuring that the clamp is tightly secured. If you need to access this internal connection, you can remove the back panel of the appliance by unscrewing the screws that hold it with an appropriate screwdriver. Once the panel is removed, you can see the supply hose connected to the water inlet valve, identifiable by its threaded end and its tightening clamp.

Important points: Only use the hoses provided with your dishwasher and do not reuse old hoses, as this could cause leaks. The hydraulic pressure must be between 0.08 and 0.8 MPa. If you open the appliance or handle the water connections, make sure that the dishwasher is unplugged and that the main water tap is closed during the entire intervention. After cleaning or maintenance, check that all connections are tight before putting the appliance back into service.

Question 29

What does the end-of-cycle alarm signal mean on the Candy Brava Simply FI dishwasher?

Accepted Answer

The end-of-cycle alarm signal on your Candy Brava Simply FI dishwasher indicates that the washing program is complete. This signal may manifest as a beep or a light on the control panel.

Function of the end-of-cycle alarm signal

Washing completion notification: The signal informs you that the washing cycle is finished and that the dishes are ready to be taken out.
  Safety: It is advisable to wait a few moments after this signal before opening the door to avoid hot water splashes.

What to do when the signal sounds?

Carefully open the dishwasher door.
  Check that the dishes are clean and that the water has been properly drained.
  Turn off the appliance if necessary.

In case of a problem with the signal
If the alarm signal continues to sound abnormally or if the dishwasher does not stop properly, this may indicate a malfunction. In this case, it is recommended to have the appliance checked by a qualified professional.

Question 30

How to disable demo mode on a Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

The demo mode on the Candy BRAVA SIMPLY FI dishwasher is a setting designed to showcase the features of the appliance without starting a real wash cycle. This mode is typically activated in stores for demonstration purposes.

Procedure to disable demo mode:

Turn off the dishwasher by pressing the power button.
Unplug the appliance from the electrical outlet for about 5 minutes to reset the system.
Plug it back in and turn on the dishwasher.
Check if demo mode is still active. If so, it may be necessary to perform a specific key combination to exit demo mode (refer to the instructions on the control panel, often a long press on certain buttons).

If these steps do not disable demo mode, it is advisable to contact Candy customer service or a specialized technician for personalized assistance.

Question 31

How to activate and deactivate the control lock on the Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

The control lock on your Candy BRAVA SIMPLY FI dishwasher is a handy feature that prevents any accidental changes to the settings, especially useful if you have children at home.

Activating the control lock

Make sure the dishwasher is turned on.
  Locate the button or icon on the control panel that represents a padlock, the symbol of locking.
  Press and hold this button for about 3 to 5 seconds.
  A sound signal (beep) or the appearance of a padlock symbol on the screen indicates that the lock is activated.

Deactivating the control lock

To deactivate the lock, repeat the same operation: press and hold the lock button for a few seconds.
  The sound signal or the disappearance of the padlock symbol will confirm that the controls are accessible again.

This feature allows you to secure the use of your dishwasher by preventing any unintentional changes to programs or settings.

Question 32

How to use rinse aid in the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

Rinse aid is an important product for your CANDY BRAVA SIMPLY FI dishwasher. It helps improve the drying of dishes and prevents water spots or stains on washed surfaces.

Using rinse aid:

Locate the reservoir: Open the dishwasher door. The rinse aid reservoir is usually located inside the door, near the detergent compartment.
Fill the reservoir: Unscrew or open the cap of the reservoir. Pour the rinse aid until you reach the indicated fill mark. Avoid overfilling to prevent spills.
Close the reservoir: Properly close the cap to avoid any leaks during the wash cycle.
Adjust the dosage (if possible): Some models allow you to adjust the amount of rinse aid dispensed. A dosage that is too high can leave marks, while a dosage that is too low can reduce rinsing efficiency.
Check regularly: Frequently check the level of rinse aid and refill it as needed, especially if you use your dishwasher often.

By following these steps, you will optimize the operation of your CANDY BRAVA SIMPLY FI dishwasher and achieve clean, spot-free dishes.

Question 33

Why does my CANDY BRAVA SIMPLY FI dishwasher emit frequent beeps?

Accepted Answer

The frequent beeps from your CANDY BRAVA SIMPLY FI generally correspond to one of the acoustic signals provided by the manufacturer. Here’s how to identify the exact cause and resolve it.
End of cycle signal (most common cause)
If the beeps sound after a wash, it is the normal operation of the machine. According to the manual, the dishwasher emits a 5-second acoustic signal, repeated 3 times at 30-second intervals to indicate the end of the program. After this alert, the device automatically turns off. You can open the door and unload the dishes without intervening.
Error codes displayed on the screen
Check the digital display of the CANDY BRAVA SIMPLY FI. If an error code is visible, it corresponds to a specific problem: E2 = lack of water (open the inlet tap), E3 = kinked drain hose or clogged filter (clean the filter and check that the hose is not pinched), E4 = water leak (check the connections), E5, E6, E7, Ef, EL = electronic failure (contact customer service), E8 or Ei = heating problem or clogged filter plate (clean the filter plate under the tap).
Low salt alert
The display shows SL when the salt reservoir at the base of the machine is empty or nearly empty. This is a common cause of warning beeps. Fill the salt container located at the bottom of the device by unscrewing the cap, pour salt up to the limit of the reservoir, clean the threads, and screw the cap back on. An alert beep is often added to this lack.
Door not closed properly
Ensure that the dishwasher door is completely closed and locked. A poorly engaged door prevents the cycle from starting and triggers sound alerts. Close it firmly until you hear a click.
Disable end of program sound signal
If the beeps bother you, you can disable them by performing the following procedure with the dishwasher turned off: press and hold the PROGRAM button while turning on the device with the ON/OFF button (you will hear a sound), keep the PROGRAM button pressed for at least 15 seconds until you hear 2 beeps, release it, then press PROGRAM again (the display will show b0 = disabled, or b1 = enabled). Finally, turn off the device with ON/OFF to confirm the setting.
Additional checks
Clean the machine's filters after each use, as a clogged filter can trigger error alerts. Also, check that the drain hose is not kinked and that the siphon is not blocked. If the problem persists after these checks and an error code E5 to E8 is displayed, contact Candy customer service by providing the model number located on the plate inside the door.

Question 34

How to program a delayed start on a Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

To program a delayed start on your Candy BRAVA SIMPLY FI dishwasher, first load the dishes and place the detergent in the washing compartment. This function allows you to delay the start of the cycle from 1 to 23 hours, which is particularly useful for running your wash during off-peak hours and optimizing your energy consumption.

Here are the steps to follow:

Press the “DELAYED START” button on the control panel. The display will show “00”.
Press this same button again to increase the desired number of hours. With each press, the delay increases by one hour (1h, 2h, 3h, etc.) up to a maximum of 23 hours.
Once the delay is set to your liking, press the “START” button to confirm and start the countdown. The screen will display the remaining time before the cycle starts.
At the end of the countdown, the program starts automatically and the display indicates the total duration of the washing cycle.

If you wish to cancel the delayed start after programming it, press the “CANCEL” button for at least 3 seconds. The message “00” will appear on the screen accompanied by sound signals, and the delayed start will be canceled. You can then reprogram a new cycle if necessary.

Question 35

Why doesn't my Candy Brava Simply FI dishwasher start after programming and turns off automatically?

Accepted Answer

If your Candy Brava Simply FI dishwasher does not start after programming and turns off automatically, several simple checks can resolve this issue. Start by ensuring that you are correctly following the startup procedure: first press the ON/OFF button for 2 seconds (the display should show two dashes), then select a program by pressing PROGRAMS, and finally confirm the start by pressing the START button. If you do not press START, the machine will not start and will turn off after a few seconds.
The door must be completely closed and locked for the cycle to start. Check that nothing obstructs the closing of the door (dishes too high, trapped object, damaged seal). If you open the door during the program, the machine will stop automatically and display the remaining time by flashing: simply close the door for the cycle to resume from where it was interrupted.
Next, check that the power supply is working: test the outlet with another device (lamp, charger) to confirm its proper functioning. Also, make sure that the water tap is open: a closed tap will cause the display to show error code E2, and the machine will stop. If you see an error code on the display (E2, E3, E4, etc.), consult the error table to identify the problem precisely: E2 means lack of water, E3 means unable to drain, E8 indicates a heating problem or a clogged filter plate.
Check that the water supply hose is not kinked and that the inlet filter of the hose is not blocked (visible at the end of the hose). A compressed hose or a clogged filter will prevent water from arriving and will cause the startup to fail. Similarly, check that the drain hose is not kinked and that it is not submerged in water: if the end is soaking in a bowl of water, siphoning will prevent normal operation.
The machine filters must be clean: a clogged filter plate or micro-filter can cause operational issues. Open the lower basket, unscrew the micro-filter by turning the handle counterclockwise, and clean the entire system under running water. Also, check that nothing obstructs the rotation of the washing arms: a plate or utensil in the wrong position can block the system.
For a correct startup of the Candy Brava Simply FI, follow this sequence: 1) Close the door properly, 2) Press ON/OFF for 2 seconds, 3) Choose a program with PROGRAMS, 4) Press START. You should hear a beep and the display should show the program time. If no beep sounds or if the machine turns off after a few seconds, it is a sign that the door is not properly closed or there is a water supply issue.
If after these checks the problem persists, or if an error code is constantly displayed (especially E5, E6, E7, Ef, EL, E8 or Ei), it may indicate a failure of the electronic control or an internal defect. Contact Candy Customer Service by providing the model (BRAVA SIMPLY FI) listed on the plate inside the door for an accurate diagnosis and technical intervention.

Question 36

What is the duration of the eco program on the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The eco program of the CANDY BRAVA SIMPLY FI dishwasher is designed to optimize water and energy consumption while ensuring effective cleaning. Its duration is generally longer than quick programs to allow for a deep clean with fewer resources.

For this model, the typical duration of the eco program is about 3 hours. This duration may vary slightly depending on the load and the level of soiling of the dishes.

In summary:

Approximate duration: 3 hours
Goal: water and energy savings
Advantage: effective and eco-friendly cleaning

Question 37

What is the Zoom program on the CANDY BRAVA SIMPLY FI washing machine?

Accepted Answer

The CANDY BRAVA SIMPLY FI dishwasher does not have a program named Zoom according to the official documentation provided by the manufacturer. You may be referring to the Ultra Rapid 24 minutes program, which is the fastest cycle available on this model.
The Ultra Rapid 24' program is designed to quickly clean lightly soiled dishes in just 24 minutes at a temperature of 50°C. It is the ideal program for a quick wash immediately after a meal, particularly recommended for a load of up to 6 people.
Features of the Ultra Rapid 24' program:
Duration: 24 minutesWater temperature: 50°CCapacity: Up to 6 place settingsType of dishes: Normally soiled to lightly soiled dishesAdvantage: Very fast washing and drying for immediate daily use
This program uses Candy's IMPULSE technology, which reduces energy and water consumption while maintaining optimal cleaning efficiency. You can combine this program with the EXPRESS option to save an average of 25% in time and energy, although this slightly compromises the final drying. For better drying, it is recommended to slightly open the door at the end of the cycle to promote natural air circulation.
If you are looking for a more comprehensive program with a pre-wash function, the Rapid 59' program (65°C, 59 minutes) offers a good compromise between speed and efficiency for a normal load of dishes.

Question 38

How to start the express program on the CANDY BRAVA SIMPLY FI oven?

Accepted Answer

To start the express program on your CANDY BRAVA SIMPLY FI oven, follow these simple steps:

Turn on the oven by pressing the power button or turning the main dial, depending on the model.
Select the express program using the program selector or the touchscreen. The express program is usually indicated by a symbol or clearly named.
Adjust the settings if necessary, such as the temperature or duration, according to your needs. Some models offer automatic adjustment for this program.
Start cooking by pressing the start button or confirming your selection on the screen.

The express program is designed for quick and efficient cooking, ideal for dishes requiring reduced time. Make sure the oven is preheated if necessary and that the foods are suitable for this type of cooking.

Question 39

What does error 03 mean on the CANDY BRAVA SIMPLY FI dryer and how can I resolve it?

Accepted Answer

Error 03 on the CANDY BRAVA SIMPLY FI dryer generally indicates a problem related to the temperature sensor or the heating circuit. Here’s how you can proceed to try to resolve this issue:

Steps to follow to resolve error 03:

Unplug the device: For your safety, always start by unplugging the dryer from the electrical outlet before any handling.
  Check the lint filter: A clogged filter can lead to overheating or malfunction. Clean it thoroughly if necessary.
  Let the device cool down: If the dryer has been used recently, let it cool down for at least 30 minutes before turning it back on.
  Inspect the electrical connections: Check that the internal cables and connectors are not damaged or loose (this step should be performed by a technician if you are not comfortable with electronics).
  Restart the device: Plug the dryer back in and start a cycle to see if the error persists.

If error 03 continues to appear after these checks, it is advisable to contact a qualified technician or customer service for a thorough diagnosis, as this may indicate a more complex problem with the temperature sensor or heating system.

Question 40

What amount of regenerating salt should be used for the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The salt reservoir of the CANDY BRAVA SIMPLY FI dishwasher has a capacity of 1.5 to 1.8 kg. During the first use, it is essential to completely fill the regenerating salt reservoir, then add water until it overflows from the compartment. Afterwards, refill it regularly based on your consumption and the setting of your appliance's water softener.
To load the salt, unscrew the cap of the reservoir located at the bottom of the machine. During filling, a little water naturally overflows: this is normal, continue to pour the salt until the reservoir is completely full (you can mix with a spoon). Then clean the threads of the reservoir to remove any salt residues, and screw the cap back on tightly.
Important after loading the salt: you must start a complete wash cycle or the pre-wash/soaking/rinsing program for the regeneration system of the softener to work properly.
Only use regenerating salt specifically designed for dishwashers. Other types of salt contain insoluble substances that could damage the softening system in the long term. The appearance of white spots or limescale buildup on dishes is generally a sign that regenerating salt is lacking.
The frequency of refilling mainly depends on the hardness of the water in your area and the setting of the softener. The harder the water, the faster the salt will be consumed. You can check the hardness setting of your water with your local supplier and adjust the softener level accordingly (the appliance offers 8 adjustment levels, from d0 to d7, factory preset to d4).

Question 41

What to do when the program indicates "door open" on the CANDY BRAVA SIMPLY FI dishwasher and the door won't open?

Accepted Answer

When your CANDY BRAVA SIMPLY FI dishwasher displays the message "door open" and you cannot open the door, it usually means that the door locking system is activated for safety reasons. Here’s what to do:

Steps to resolve the "door open" issue:

Check that the door is properly closed: Make sure nothing is preventing the door from closing completely, such as a misaligned basket or an object stuck in the way.
  Wait for the end of the cycle: The door lock remains active during the program operation and for a few minutes after it ends to prevent leaks. Wait for the program to be completely finished and the lock to deactivate automatically.
  Restart the appliance: If the door remains stuck and the message persists, unplug the dishwasher for about 5 minutes, then plug it back in. This may reset the electronic system.
  Inspect the locking mechanism: Visually check if the door lock is damaged or if there are debris that could prevent it from functioning properly.
  In case of persistent blockage: Do not force the door open to avoid damaging the mechanism. Contact a qualified professional for safe intervention.

These tips will help you manage the "door open" message and ensure the safety and proper functioning of your CANDY BRAVA SIMPLY FI dishwasher.

Question 42

How to activate silent mode on the CANDY BRAVA SIMPLY FI oven?

Accepted Answer

The CANDY BRAVA SIMPLY FI oven has a silent mode that reduces the sounds emitted by the appliance during operation, ideal for more discreet use.

Activating silent mode

Turn on your oven by pressing the power button.
  Access the settings menu via the touchscreen or the control buttons located on the control panel.
  Look for the "Silent mode" option in the list of settings. This option may be indicated by a crossed-out speaker symbol or by the mention "Silent".
  Select the option to activate silent mode. You should see a visual confirmation on the screen.
  Confirm the selection if necessary by pressing the validation button.

Notes

The silent mode reduces sounds related to alerts and beeps from the oven, but does not cut off essential safety sounds.
  To deactivate this mode, repeat the procedure and choose the option to disable silent mode.

This feature is particularly useful for cooking in the evening or in an environment where noise needs to be limited.

Question 43

Where is the small button or door switch on the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The CANDY BRAVA SIMPLY FI is a dishwasher, not an oven. The door switch (or sensor) that detects if the door is closed is usually located on the inner edge of the dishwasher frame, at the lock level. This component is often not very visible as it is recessed or discreet.
On this model, the door switch is typically integrated into the locking system, in the upper or side frame near the handle. When you close the door, it mechanically activates this sensor which signals to the dishwasher that the door is securely locked.
To check its operation, proceed as follows:

Close and open the door several times slowly and observe if it clicks or activates something at the moment of full locking
If your dishwasher does not start, check that the door is completely closed (it must be airtight)
Examine the rubber seal around the door (clean it regularly with a damp cloth) as a dirty seal can prevent proper closure

If the door does not close properly or if the dishwasher does not recognize the closure and refuses to start, it is possible that the sensor is defective or misaligned. In this case, contact Candy customer service specifying the serial number of your appliance (indicated on the technical label inside the door).

Question 44

Where is the door switch on the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The door switch of the CANDY BRAVA SIMPLY FI dishwasher is an important component that detects whether the door is properly closed for the appliance to function correctly.Location of the door switchOpen the dishwasher door to access the area where the switch is located.Inspect the door frame on the sides, usually near the hinge or on the inner edge of the door.The switch is often a small push button or lever that is activated when the door is closed.On some models, it may be located on the inner frame of the dishwasher, directly opposite the edge of the door.Practical tipsHandle with care to avoid damaging the switch.If you need to replace it, make sure to use a part compatible with the BRAVA SIMPLY FI model.

Question 45

Why does my Candy Brava Simply Fi dishwasher work when it is not supposed to be on?

Accepted Answer

If your Candy Brava Simply Fi dishwasher is running when you haven't started it, several model-specific causes may explain this. Here’s how to identify and resolve the issue.
First, check the delayed start. The Candy Brava Simply Fi has a delayed start function that allows you to postpone the start by 1 to 23 hours. If you have activated this function without realizing it, the appliance will start automatically at the scheduled time. Press the START/CANCEL button for at least 3 seconds to cancel any pending delayed start.
Check the Smart Touch mode. This model is equipped with Simply-Fi Wi-Fi connectivity and Smart Touch mode (program P0). If this mode is activated, the appliance may restart automatically or respond to commands via the Candy simply-Fi mobile app. To disable this mode, press the ON/OFF button for 2 seconds, then select another program by pressing the PROGRAMS button.
Check the door closure. If the door is not properly closed or if the door switch is faulty, the appliance may behave unpredictably. Close the door gently until you hear a distinct click and check that no object is blocking the switch located at the corner of the door.
Perform a complete reset. After a power outage, the dishwasher has a backup memory that remembers the last program run. If you want to completely stop it, press the ON/OFF button for 2 seconds to turn it off, then wait a few minutes before plugging it back in. Also, ensure that you have closed the water supply tap after the last cycle.
If the problem persists, unplug the appliance completely for 5 minutes to reset the electronic system. This action clears any pending commands and restores the appliance to its initial state. Then plug it back in and test for normal operation. If the dishwasher still starts on its own or shows electronic malfunction, contact Candy customer service specifying the model BRAVA SIMPLY FI indicated on the nameplate.

Question 46

How to stop a delayed start set for 3 hours on the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

Your CANDY BRAVA SIMPLY FI is a dishwasher, and it is equipped with a delayed start function that allows you to postpone the start of the cycle from 1 to 23 hours. To cancel a delayed start set for 3 hours (or any other duration), follow these simple steps.
To immediately cancel an ongoing delayed start: Press the "CANCEL" button (start/cancel button) and hold it down for at least 3 seconds without releasing. The display will show "00" and you will hear beeping sounds. The delayed start and the selected program will be canceled.
Once "00" is displayed, two dashes will appear on the dishwasher's screen, confirming the complete cancellation. You can then set a new program if you wish, or simply turn off the appliance by pressing the "ON/OFF" button.
Important: Do not release the "CANCEL" button before holding it for at least 3 seconds, otherwise the cancellation will not work. The display must show "00" to confirm that the operation was successful. This is the only way to stop a delayed start that has already been programmed.
The CANDY BRAVA SIMPLY FI dishwasher can remember the last program used according to your settings. If you do not wish to restart a cycle after canceling the delayed start, just make sure the machine is completely turned off by pressing the "ON/OFF" button once.

Question 47

How to program a 45-minute wash cycle on the Candy BRAVA SIMPLY FI dishwasher?

Accepted Answer

The Candy BRAVA SIMPLY FI dishwasher does not have a function to set the cycle duration freely to exactly 45 minutes. However, you can achieve a cycle very close to this duration by following these steps.
To access the Quick 59-minute program:

Open the door and load your dishes
Press the ON/OFF button for 2 seconds (two dashes will appear on the display)
Press the PROGRAMS button to scroll through the different programs
Select Quick 59 (59-minute cycle at 65°C), intended for daily washing after meals
Press the START button: the screen will display the program duration in hours and minutes before starting
Close the door to start the cycle

To achieve approximately 45 minutes: Activate the EXPRESS option before starting. This function reduces the cycle duration by about 25%, bringing the Quick 59 program down to about 44-45 minutes. Simply press the EXPRESS button (the corresponding indicator will light up) after selecting the Quick 59 program.
The BRAVA SIMPLY FI display always confirms the exact cycle duration before starting, alternating between hours and minutes. You can also use the DELAY START option (up to 24 hours) if you want the cycle to finish at a specific time rather than starting immediately.

Question 48

Why is my Candy Brava Simply FI dishwasher not cleaning properly?

Accepted Answer

If your Candy Brava Simply FI dishwasher is not cleaning dishes well, several simple checks can quickly improve the results. Start by cleaning the filters, which play an essential role: this model has a self-cleaning triple filter, but you need to check and clean the central tank and the metal plate after each wash. To do this, remove the bottom basket, turn the microfilter handle counterclockwise, and then rinse everything under running water.

Next, check that the wash arms rotate freely without obstruction. A mispositioned utensil can prevent the arms from turning, which explains poor washing. Also, make sure you are not overloading the dishwasher: respect the maximum load of 16 place settings indicated for your model. Dishes should be spaced out and the openings facing down for proper water circulation.

Check the detergent dosage: an insufficient dose washes poorly, while an excessive dose wastes detergent and may leave residues. The manual recommends 20 to 30 grams of detergent in the "wash" compartment. Before starting the cycle, remove large food residues (bones, fish bones, burnt leftovers) from the dishes to avoid clogging the filters and spray arms. Do not pre-rinse the dishes by hand: this reduces washing efficiency.

Select the program suitable for the dirt level: for normally soiled dishes, use the Universal program (60°C); for heavy dirt or baked-on pots, choose the Hygienic program (75°C). If the pots are excessively burnt, let them soak for a few hours before washing.

Check the water softener: hard water leaves whitish deposits on dishes. This appliance is factory preset to level 4, but this setting can be adjusted according to the hardness of your local water (check with your water supplier). Also, ensure that the regenerating salt tank is not empty: lack of salt reduces the effectiveness of the softening system. Finally, make sure that the rinse aid is filled (optical indicator on the dispenser) and set correctly (recommended position 4) to avoid streaks and speed up drying.

If, despite these checks, the dishes remain poorly washed or partially dry, check that the orifices of the rotating arms are not clogged with residues. Disassemble them by unscrewing the knurled nut and rinse them under a tap. You can also run a cleaning cycle of the dishwasher with a specific product to eliminate limescale or internal deposits.

Question 49

Why does my CANDY BRAVA SIMPLY FI dishwasher leave marks on my glasses even though I use salt?

Accepted Answer

If your CANDY BRAVA SIMPLY FI dishwasher leaves marks on your glasses despite using salt, several causes may be responsible:

1. Check the level and quality of the salt

Make sure the salt reservoir is well filled with suitable regenerating salt.
An insufficient level of salt can reduce the effectiveness of the water demineralization system, especially in areas where the water is very hard.

2. Quality and dosage of the detergent

Use a detergent that is compatible with your dishwasher and of good quality.
An incorrect dosage or an unsuitable detergent can leave residues on the dishes.

3. Washing temperature and program

Check that the washing temperature is sufficient (generally around 50-65°C) to effectively dissolve the detergent.
Choose a program suitable for the type of dishes and the degree of soiling.

4. Rinsing and water softener

The rinsing cycle must be complete and effective to remove residues.
If the water softener is not working properly, it can lead to limescale marks.

5. Loading the dishes

Avoid overloading the dishwasher and ensure that the glasses do not touch each other to allow good water circulation.

By checking these different points, you should be able to reduce or eliminate marks on your glasses. If the problem persists, it may be helpful to check the proper functioning of the built-in water softener or to contact a professional for a thorough diagnosis.

Question 50

How to connect the CANDY BRAVA SIMPLY FI oven to the Wi-Fi network?

Accepted Answer

The CANDY BRAVA SIMPLY FI is a connected dishwasher. To connect it to your Wi-Fi network and use the Candy simply-Fi app, follow these steps:

1. Download the Candy simply-Fi appDownload the app on your smartphone (available on the App Store for iOS and the Play Store for Android). Create an account and activate the Wi-Fi function in the app settings.

2. Prepare the necessary informationBefore setup, gather:The serial number of the dishwasher (visible on the nameplate inside the door)The name of your Wi-Fi network (SSID)Your Wi-Fi password (paying attention to uppercase letters and special characters)

3. Configure the Wi-Fi connectionOpen the simply-Fi app, select your dishwasher, and enter its serial number. The app will guide you to connect the device to your home network. You will need to:Exit the app and access your phone's Wi-Fi settingsSelect the device's network from the available listReturn to the simply-Fi appEnter your home Wi-Fi credentials (network name and password)Wait for the connection to finalize

4. Check the connectionOnce connected, the dishwasher will synchronize with your Wi-Fi network. You will then be able to start programs remotely, schedule a delayed start, view washing history, and check energy consumption statistics.

Troubleshooting: If you see a network error message on the dishwasher's screen, check that your Wi-Fi password is correct, that your router is on and nearby. Restart the setup process if necessary.

Question 51

Why is my CANDY BRAVA SIMPLY FI dishwasher not cleaning properly?

Accepted Answer

If your CANDY BRAVA SIMPLY FI dishwasher is not cleaning properly, several causes may explain this problem. The BRAVA SIMPLY FI model has a self-cleaning triple filtration system and sophisticated rotating arms that may be the source of the problem if not properly maintained. Before contacting customer service, please check the following items.
Cleaning the filtration system: The filtration system consists of three elements: a central tank that retains large particles, a metal plate that filters the washing water, and a self-cleaning micro-filter that traps micro-dirt. Although the micro-filter is self-cleaning, it is important to check and clean these filters after each wash. To clean: remove the micro-filter by turning its handle counterclockwise, remove the removable central tank, then take out the metal plate and rinse everything under running water. Checking every two washes is sufficient for the micro-filter, but the central tank and plate should be checked after each use to prevent clogging.
Condition of the rotating arms: If the dishes are insufficiently cleaned, check that the openings of the rotating arms (upper and lower) are not clogged. Disassemble the upper arm by turning it until it aligns with the STOP marking, then pressing upwards while unscrewing. The lower arm is simply removed by pulling upwards. Clean both arms under a water tap to remove any dirt, then replace them correctly, ensuring that the upper arm is positioned facing the STOP marking.
Loading and positioning of the dishes: Dishes should be loaded in a way that allows for proper water circulation. Avoid overloading the baskets and ensure that the rotating arms can turn freely without being blocked. Pots with stubborn residues should be soaked in water and detergent before washing. Also, check that no cutlery or plate is obstructing the opening of the detergent container lid, as improper opening hinders the dispersion of the detergent.
Detergent and rinsing: Always use a detergent specifically designed for dishwashers (powder, liquid, or tablets) and adhere to the recommended dose of 20 to 30 grams in the washing compartment. Old or hardened detergent, or an insufficient dose, will severely affect the results. For rinse aid, the recommended dosage setting is 4 (on a scale of 1 to 6). If you notice white spots on the dishes at the end of the wash, increase this setting by one position. The optical indicator on the dispenser allows you to check the level: a clear reflection indicates that the tank is empty.
Adjusting the water softener: The CANDY BRAVA SIMPLY FI is equipped with a factory preset water softener at level d4 (level 4). If your water hardness is too high, this can cause white deposits and poor washing performance. You can adjust the softener from d0 to d7 according to your water hardness (consult your water supplier for the hardness degree). Always fill the salt reservoir and ensure that its cap closes properly. The absence of salt is indicated by the appearance of white spots on the dishes.
Selecting the appropriate program: Choosing the right program is crucial. For normally soiled dishes, use the UNIVERSEL (60°C), QUOTIDIEN (55°C), or ECO (45°C) programs according to the level of soiling. Quick programs like ULTRA RAPIDE 24' (50°C) are suitable only for lightly soiled dishes for a maximum of 6 people. If the problem persists after checking all these items, you will need to contact customer service, specifying the model (BRAVA SIMPLY FI) for a quicker and more effective intervention.

Question 52

How to effectively clean the CANDY BRAVA SIMPLY FI?

Accepted Answer

Important: The CANDY BRAVA SIMPLY FI is a dishwasher, not an oven. Here’s how to clean it effectively to ensure proper functioning and longevity.
Cleaning the filters (after each wash)
The filtration system consists of a central tank, a metal plate, and a self-cleaning micro filter. After each wash cycle, empty the central tank of food residues, remove the metal plate, and rinse the entire system under running water. Screw the micro filter back in a clockwise direction, ensuring it is tight. Every two weeks of use, inspect the self-cleaning micro filter. Never use the machine without the filters in place.
External cleaning
Regularly clean the exterior of the machine with a simple cloth dampened with soapy water. Do not use abrasive detergents or harsh chemicals that could damage the surface.
Maintenance of the seal and door
Periodically clean the rubber seal of the door with a damp cloth to remove any traces of debris or rinse aid. Leave the door slightly ajar after each wash to improve air circulation and promote natural drying of the interior.
Cleaning the wash arms
If the dishes are not being cleaned properly, check that the openings of the wash arms are not blocked. To clean them, disassemble the upper arm by aligning it with the stop marking and unscrewing it clockwise. The lower arm can be easily removed by pulling it upwards. Rinse both arms under running water to remove any dirt, then reassemble them.
Self-cleaning tub and deep cleaning
The washing tub is self-cleaning and does not require special maintenance. However, to remove limescale or dirt deposits, regularly run a complete cleaning cycle with specific products designed for dishwashers. The machine must be empty during this operation. If you notice oxidation stains on the stainless steel tub, use a very fine abrasive, avoiding any product containing chlorine or steel wool.

Question 53

How to find spare parts for the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

To find compatible spare parts for your CANDY BRAVA SIMPLY FI dishwasher, here are several practical solutions:

1. Visit the official CANDY website
The official CANDY website often has a section dedicated to spare parts. By entering the exact reference of your model, you can access the list of compatible parts and order them online.

2. Check specialized spare parts websites
Several online platforms specialize in selling parts for household appliances, such as Spareka, ManoMano, or other dedicated shops. By searching for your model, you can find the necessary parts for repairing your dishwasher.

3. Go to appliance or repair shops
Some physical stores or repair workshops have spare parts or can direct you to reliable suppliers.

4. Prepare the necessary information
To facilitate the search, make sure you have the exact model number (BRAVA SIMPLY FI) and, if possible, the serial number of your appliance. This ensures that the ordered parts will be perfectly compatible.

By following these tips, you should be able to find and order the suitable spare parts for your CANDY BRAVA SIMPLY FI dishwasher.

Question 54

What does the network error on the CANDY BRAVA SIMPLY FI dishwasher mean and how can it be resolved?

Accepted Answer

The network error on the CANDY BRAVA SIMPLY FI dishwasher indicates a connection problem between the appliance and your home Wi-Fi network. This error affects connected functions, such as remote control via the Candy simply-Fi mobile app, but does not prevent the normal operation of the dishwasher. The BRAVA SIMPLY FI uses Simply-Fi technology combined with NFC to communicate with your Android or iOS smartphone.

Pre-checks: Ensure that your Wi-Fi network is functioning properly and that other devices (phone, tablet, computer) can connect to it normally. Also, check that the dishwasher is powered on and that the power outlet is functional. These steps will eliminate general network or power issues before any further intervention.

Troubleshooting steps: Start by restarting your dishwasher by unplugging it for 2 to 3 minutes, then plug it back in. This action resets the Wi-Fi connection module. Then, place the appliance closer to your Wi-Fi router to improve signal quality (ideally within 5 meters). If your network is only on 5 GHz, temporarily switch to a 2.4 GHz band, as the Candy simply-Fi app works better on this frequency.

Resetting the Wi-Fi connection: On the dishwasher, press the "ON/OFF" button for 2 seconds to turn it on, then select program P0 to activate Smart Touch mode (you will see an NFC symbol appear). Open the Candy simply-Fi app on your Android or iOS smartphone and create a profile if you do not have one. Follow the instructions in the app to reconnect the device to your network. If the app recognizes the device, hold your smartphone over the Smart Touch logo located on the dishwasher door until the synchronization is complete.

Router check: Restart your Wi-Fi router by unplugging it for 30 seconds and then plugging it back in. Check that the router does not have active MAC filtering that would block the dishwasher's MAC address. Consult the router settings to temporarily disable filtering if it is enabled. Also, ensure that the bandwidth is not limited too restrictively.

App issues: Completely close the Candy simply-Fi app and reopen it after a few seconds. If available, update the app to the latest version from Google Play (Android) or the App Store (iOS). Log out of your user profile and log back in. If the device appears as "offline" in the app despite selecting Smart Touch mode, this may indicate a temporary synchronization delay; wait a few minutes before trying again.

If the network error persists after all these steps, contact CANDY customer service specifying the BRAVA SIMPLY FI model and the steps already attempted. The appliance will continue to operate normally for washing dishes, with only the connected functions remaining unavailable until the network issue is resolved.

Question 55

What does error code 18 mean on the CANDY BRAVA SIMPLY FI dishwasher and how can it be resolved?

Accepted Answer

Error code 18 on the CANDY BRAVA SIMPLY FI dishwasher generally indicates a problem related to the temperature probe or temperature management during the wash cycle. Here’s how you can proceed to resolve this issue:

1. Checking the temperature probe

Ensure that the probe is not damaged or disconnected.
Check that it is not blocked by residues or limescale.

2. Restarting the appliance

Turn off the dishwasher and unplug it for a few minutes.
Plug it back in and turn it on to see if the error code disappears.

3. Checking electrical connections

Ensure that all cables and connectors related to the temperature probe are properly in place and in good condition.

4. Operating conditions

Make sure that the ambient temperature around the appliance complies with the manufacturer's recommendations.

If after these checks the error code 18 persists, it is advisable to call a qualified technician for a thorough diagnosis and possible repair.

Question 56

How to disable demo mode on the Candy Brava Simply FI washing machine?

Accepted Answer

To disable demo mode on your Candy Brava Simply FI washing machine, follow these simple steps:

Make sure the appliance is turned on.
Press and hold the "Start/Pause" and "Program" buttons simultaneously for about 5 seconds.
The screen should then exit demo mode and return to the normal display of washing cycles.

If this method does not work, also try:

Turning off the appliance, then turning it back on while holding the "Start/Pause" button for a few seconds.

Demo mode is a display mode intended for stores to showcase features without starting a real cycle. Disabling it allows you to use your washing machine normally.

Question 57

How to replace the lost remote control of the Candy Brava Simply FI dishwasher?

Accepted Answer

If you have lost the remote control for your Candy Brava Simply FI dishwasher, here are the steps to follow to obtain a replacement:

1. Initial Check
First, make sure that the remote is indeed lost by checking the usual places where you use or store it.

2. Contact Candy Customer Service
The safest way to obtain a compatible remote control is to contact the official Candy customer service. They can provide you with the exact references and guide you on how to order a replacement remote control.

3. Purchase a Replacement Remote Control

Via the official Candy website: Some manufacturers offer the sale of spare parts and accessories online.
Specialized Stores: Retailers or repairers of household appliances may sometimes provide or order the suitable remote control.

4. Alternatives
Depending on the model, it is possible that the dishwasher can be controlled directly via the built-in buttons or a mobile app if the model is connected. Check if your device has these options to continue using it while waiting for the remote control.

In summary, the best approach is to contact Candy customer service to obtain an official remote control compatible with your Brava Simply FI model.

Question 58

What are the symbols and functions of the buttons on the Candy Brava Simply FI dishwasher?

Accepted Answer

The Candy Brava Simply FI dishwasher is equipped with several buttons whose symbols represent different functions to facilitate its use. Here are the main symbols you can find on the buttons of this model:

Start/Pause: A triangle symbol (▶) to start the cycle or two vertical bars (||) to pause.
  Washing Program: Specific icons indicating different cycles, such as:
  
    Eco: often represented by a leaf or a water droplet symbol.
    Intensive: a symbol of a pot or very dirty dishes.
    Quick: a lightning bolt or hourglass indicating a short cycle.
  
  Temperature Selection: A thermometer or bars indicating different temperature levels.
  Delayed Start: A clock or timer symbol allowing you to schedule the start for later.
  Indicators: Indicator lights may signal the status of the dishwasher, such as the end of the cycle, lack of salt, or rinse aid.

These symbols are designed to make usage intuitive. If you need precise identification of a particular symbol, feel free to describe it to me, and I will help you interpret it.

Question 59

Why does my CANDY BRAVA SIMPLY FI dishwasher turn on but not take in water and not start?

Accepted Answer

If your CANDY BRAVA SIMPLY FI dishwasher turns on but does not take in water, preventing the cycle from starting, first check the display: if the error code E2 appears on the screen accompanied by a sound signal, this confirms a lack of water. Here are the steps to take to resolve this issue.
Essential checks on the tap and hoses:

Make sure that the main water tap supplying the dishwasher is open. This is the most common cause. Open it fully by turning it to the left.
Check that the water inlet hose is not kinked, crushed, or twisted. A blocked or kinked hose prevents water from flowing properly.
If the machine is connected to new plumbing or plumbing that has not been used for a long time, open the tap and let the water run for a few minutes directly into the sink before reconnecting the supply hose. This removes any sand or rust deposits that could clog the inlet filter.

Cleaning the water inlet filter:

Unplug the dishwasher from the power supply.
Detach the water inlet hose from the tap by unscrewing it.
Look for the filter at the end of the hose (3/4" threaded connector) or directly on the water inlet valve of the machine. This filter is a small grid that retains impurities.
Clean this filter by rinsing it gently under clear water, using a soft brush if necessary.
Reconnect the hose firmly to the tap, ensuring that the clamp is tight.

Checking the water pressure:
Your installation must provide a water pressure between 0.08 MPa (minimum) and 0.8 MPa (maximum). If the pressure is insufficient (below 0.08 MPa), water will not be able to enter the dishwasher. Contact your water supplier or a plumber to check the pressure of your installation.
After these checks:

Reconnect the appliance and press the ON/OFF button for 2 seconds to turn it on.
Select a program by pressing the PROGRAMS button.
Press START to begin the cycle. If the E2 code reappears, water is still not entering: close the tap and immediately contact Candy customer service.

If after all these checks the dishwasher still does not take in water, it is an internal technical problem (solenoid valve, defective filling sensor) requiring intervention from customer service. Keep your purchase receipt and the model number visible inside the door to expedite the intervention.

Question 60

How to activate and use the child safety feature on the CANDY BRAVA SIMPLY FI oven?

Accepted Answer

The child safety feature on the CANDY BRAVA SIMPLY FI oven allows you to lock the controls to prevent any accidental manipulation, especially by children. Here’s how to activate and use this feature:

Activating the child safety feature

Turn on the oven by pressing the power button.
Access the settings menu using the touch control panel or buttons depending on the model.
Look for the “Child Safety” option or a padlock symbol in the settings.
Activate the feature by selecting this option. You may need to hold down a button for a few seconds to confirm activation.
Confirm activation: a message or padlock symbol should appear on the screen to indicate that child safety is active.

Usage and deactivation

When the child safety feature is activated, the oven controls are locked and do not respond to normal presses.
To deactivate the child safety feature, repeat the same procedure in the settings menu or hold down the dedicated button (often the same as for activation) for a few seconds until the symbol disappears.

This feature is particularly useful for preventing accidents and ensuring that the oven settings are not unintentionally changed.

Question 61

Why won't my CANDY BRAVA SIMPLY FI washing machine start after selecting the wash program?

Accepted Answer

If your CANDY BRAVA SIMPLY FI washing machine does not start after selecting a wash program, several causes may be responsible. Here are the checks and actions to take to resolve this issue:

1. Check the door closure
The machine will not start if the door is not properly closed or locked. Make sure the door is securely closed until you hear the locking click.

2. Check the power supply

Check that the electrical outlet is working properly by testing it with another device.
Ensure that the power cord is properly plugged in and in good condition.

3. Confirm the program selection
Make sure you have selected an appropriate program and confirmed your choice by pressing the start button.

4. Check the activated options
If a delayed start option is activated, the cycle will not begin immediately. Disable this option if you want an immediate start.

5. Observe the indicator lights and error codes
Flashing lights or an error code on the panel may indicate a specific problem (door, drainage, power supply, etc.). Note these indications for accurate diagnosis.

6. Perform a reset
Unplug the machine for about 5 minutes, then plug it back in and try to restart a program. This may reset the electronic components.

If after these checks your washing machine still does not start, it is possible that a technical malfunction requires the intervention of a professional.

Question 62

What should I do if the water no longer heats in my CANDY BRAVA SIMPLY FI appliance?

Accepted Answer

If the water no longer heats in your CANDY BRAVA SIMPLY FI appliance, here are several steps to follow to identify and possibly resolve the issue:

1. Check the power supply
Make sure the appliance is properly plugged in and that the outlet is functioning correctly. You can test this outlet with another appliance to confirm that it is supplying power.

2. Check the temperature setting
Ensure that the temperature is set correctly on your appliance. A setting that is too low may give the impression that the water is not heating.

3. Check the water level
Make sure that the water tank is sufficiently filled. Some models do not start heating if the water level is insufficient.

4. Inspect the filters and components

If your appliance is equipped with a filter, clean or replace it if necessary, as a clogged filter can prevent proper operation.
Also check that other components related to heating do not show visible signs of damage.

5. Observe the indicator lights or error codes
Some models display lights or error codes in case of malfunction. Consult these indicators to better understand the nature of the problem.

If after these checks the water still does not heat, it is possible that the heating system is defective and requires specialized technical intervention.

Question 63

How to save the user manual for the Candy BRAVA SIMPLY FI?

Accepted Answer

To save the user manual for your Candy BRAVA SIMPLY FI device, follow these simple steps:

Access the manual: Open the PDF file of the manual on your computer or find it online on the official website or a manual site.
Download the manual: If the manual is available online, click the download button, often represented by a downward arrow, to save the file to your device.
Choose the location: When downloading, select a folder of your choice (for example, "Documents" or "Downloads") to save the file.
Rename the file: You can change the file name to make it easier to find, for example, "Manual_Candy_BRAVA_SIMPLY_FI.pdf".
Access the saved manual: Once saved, you can view the manual at any time by opening the file from the chosen location.

This method allows you to keep the manual on your device for quick and offline access.

Question 64

How to disable demo mode on the CANDY BRAVA SIMPLY FI dishwasher?

Accepted Answer

The CANDY BRAVA SIMPLY FI is a dishwasher (the question mentions an oven, which is incorrect). Demo mode is a demonstration feature designed for stores to showcase functionalities without actually starting a wash cycle. Here’s how to disable it.
Before you begin: ensure that the appliance is completely off and the door is closed.
Steps to disable demo mode:

Step 1: Open the dishwasher door.
Step 2: Turn on the appliance by pressing the ON/OFF button.
Step 3: Press and hold the PROGRAMS and DELAY START buttons simultaneously for at least 5 seconds. You will hear a beep.
Step 4: Release both buttons.
Step 5: Turn off the appliance by pressing the ON/OFF button.

Once this procedure is completed, demo mode is disabled and the screen will display confirmation. Your CANDY BRAVA SIMPLY FI dishwasher will now operate in normal mode and wash cycles will start correctly when selecting a program.
If the problem persists: If after following these steps demo mode remains activated (you still cannot start a cycle), contact Candy customer service. It is important that this is disabled before the first domestic use so that all wash cycles function correctly.

BRAVA SIMPLY FI - Dishwasher CANDY - Free user manual and instructions

User questions about BRAVA SIMPLY FI CANDY

After each wash cycle

Self-cleaning microfilter

Monthly maintenance

Possible causes

Solutions to try

Steps to resolve the issue:

1. Check if the delayed start is activated

2. Check the Wi-Fi connection and the Simply-Fi app

3. Reset the electronic system

4. Clean the control panel

5. Check that the door is fully closed

6. Contact customer service if the problem persists

1. Check if the delayed start is activated

2. Check the Wi-Fi connection and the Simply-Fi app

3. Reset the electronic system

4. Clean the control panel

5. Check that the door is fully closed

6. Contact customer service if the problem persists

What we know about the model

To access or replace the sensor

How to locate it

Filter maintenance

Connection steps:

Features accessible via Wi-Fi:

Priority checks:

Drying operation

Tips to improve drying

"Express" option

1. Check the power supply

2. Restart the dishwasher

3. Inspect the control panel buttons

4. Clean the control panel

5. Check the control panel lock

Why use an Aquastop hose?

Installation tips

1. Preparing the equipment

2. Locating the water tap

3. Connecting the hose to the tap

4. Connecting the hose to the dishwasher

5. Checking the connections

6. Commissioning

Function of the end-of-cycle alarm signal

What to do when the signal sounds?

In case of a problem with the signal

Procedure to disable demo mode:

Activating the control lock

Deactivating the control lock

Using rinse aid:

Steps to follow to resolve error 03:

Steps to resolve the "door open" issue:

Activating silent mode

Notes

Location of the door switch

Practical tips

1. Check the level and quality of the salt

2. Quality and dosage of the detergent

3. Washing temperature and program

4. Rinsing and water softener

5. Loading the dishes

1. Visit the official CANDY website

2. Check specialized spare parts websites

3. Go to appliance or repair shops

4. Prepare the necessary information

1. Checking the temperature probe

2. Restarting the appliance

3. Checking electrical connections

4. Operating conditions

1. Initial Check

2. Contact Candy Customer Service

3. Purchase a Replacement Remote Control

4. Alternatives

Activating the child safety feature

Usage and deactivation

1. Check the door closure

2. Check the power supply

3. Confirm the program selection

4. Check the activated options

5. Observe the indicator lights and error codes