HDC 275 - Portable Refrigerator DOMETIC - Free user manual and instructions
Find the device manual for free HDC 275 DOMETIC in PDF.
| Product type | 12V/24V Portable Compressor Refrigerator |
| Brand | Dometic |
| Model | HDC 275 |
| Item number | 9105204439 |
| Total capacity | 277 litres |
| Refrigerator compartment capacity | 202 litres |
| Freezer compartment capacity | 75 litres |
| Supply voltage | 12 V DC or 24 V DC |
| Average power consumption | 61 W |
| Current consumption (at 25 °C / 32 °C) | 3.3 Ah/h / 5.1 Ah/h |
| Refrigerator temperature range | 0 °C to +10 °C |
| Freezer temperature range | -18 °C to 0 °C |
| Refrigerant | R134a (180 g) |
| Net weight | Approx. 52 kg |
| Climate class | ST (+16 °C to +38 °C) |
| Maximum permanent tilt angle | 30° |
| Interior light | LED (E14, 12/24 V, 1.2 W) |
| Battery protection | Low voltage cut-off (10.4 V / 22.8 V) |
| Door reversibility | Yes (kit supplied) |
| Optional accessory | MPS80 mains adapter (ref. 9600000442) |
Frequently Asked Questions - HDC 275 DOMETIC
User questions about HDC 275 DOMETIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Portable Refrigerator in PDF format for free! Find your manual HDC 275 - DOMETIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDC 275 by DOMETIC.
USER MANUAL HDC 275 DOMETIC
Please read this instruction manual carefully before installation and first use, and store it in a safe place. If you pass on the product to another person, hand over this instruction manual along with it.
Table of contents
1 Explanation of symbols 12
2 Safety instructions 12
3 Scope of delivery 15
4 Accessories 15
5 Intended use 15
6 Technical description 16
7 Installing and connecting the refrigerator 17
8 Using the refrigerator 20
9 Cleaning and maintenance. 26
10 Warranty 27
11 Disposal 27
12 Troubleshooting 28
13 Technical data 31
1 Explanation of symbols
DANGER!
Safety instruction: Failure to observe this instruction will cause fatal or serious injury.
WARNING!
Safety instruction: Failure to observe this instruction can cause fatal or serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair the function of the product.
NOTE
Supplementary information for operating the product.
2 Safety instructions
The manufacturer accepts no liability for damage in the following cases:
- Faulty assembly or connection
- Damage to the product resulting from mechanical influences and excess voltage
- Alterations to the product without express permission from the manufacturer
- Use for purposes other than those described in the operating manual
2.1 General safety
WARNING!
- Have a qualified technician perform the installation in wet rooms.
- Do not operate the device if it is visibly damaged.
-
If this device's power cable is damaged, it must be replaced by the manufacturer, customer service or a similarly qualified person in order to prevent safety hazards.
-
This device may only be repaired by qualified personnel. Inadequate repairs may cause serious hazards.
- This device can be used by children aged 8 years or over, as well as by persons with diminished physical, sensory or mental capacities or a lack of experience and knowledge, providing they are supervised, or have been taught how to use the device safely and are aware of the resulting risks.
- Cleaning and user maintenance must not be carried out by children without supervision.
- Children must be supervised to ensure that they do not play with the device.
- Always keep and use the device out of the reach of children under 8 years of age.
- Do not store any explosive substances, such as spray cans with propellants, in the device.
CAUTION!
- Danger of crushing! Do not put your fingers into the hinge.
- Foodstuff may only be stored in its original packaging or in suitable containers.
NOTICE!
- Check that the voltage specification on the type plate is the same as that of the power supply.
- Never pull the plug out of the socket by the connection cable.
- Disconnect the refrigerator and other electric consumers from the battery before connecting the quick charging device.
- Disconnect the refrigerator or switch it off when you turn off the engine. Otherwise you may discharge the battery.
- The refrigerator is not suitable for storing substances which are caustic or contain solvents.
- Keep the drainage outlet clean at all times.
- Do not open the refrigerant circuit under any circumstances.
-
Never transport the device in a horizontal position, so that no oil can leak out of the compressor.
-
Make sure that the refrigerator circuit is not damaged during transportation. The refrigerant in the refrigerator circuit is highly flammable. In the event of any damage to the refrigerator circuit:
-
Avoid naked flames and sparks.
Air the room well.
- Set up the device in a dry location where it is protected against splashing water.
2.2 Operating the device safely
DANGER!
- Do not touch exposed cables with your bare hands.
CAUTION!
- Before starting the device, ensure that the power supply line and the plug are dry.
- If you connect the device to a battery, make sure that no food comes into contact with the battery acid.
NOTICE!
- Do not use electrical devices inside the cooling device unless they are recommended by the manufacturer for that purpose.
- Do not place it near naked flames or other heat sources (heaters, direct sunlight, gas ovens etc.)
Danger of overheating!
Always ensure sufficient ventilation so that the heat generated during operation can dissipate. Make sure that the device is sufficiently far away from walls and other objects so that the air can circulate.
- Ensure that the ventilation vents are not covered.
- Do not fill the inner container with ice or fluid.
- Never immerse the appliance in water.
- Protect the appliance and the cable against heat and moisture.
- Make sure that foodstuffs do not touch the walls of the cooling area.
3 Scope of delivery
| Quantity | Description |
| 1 | Refrigerator |
| 1 | Assembly kit for changing the door hinge |
| 1 | Operating manual |
4 Accessories
Available as accessories (not included in the scope of delivery):
Description
Ref. no.
MPS80 mains adapter
9600000442
5 Intended use
The HDC275 refrigerator (ref. no. 9105204439) is suitable for refrigerating foodstuffs and storing frozen foodstuffs.
The device is also suitable for use on boats.
CAUTION! Health hazard!
Please check if the cooling capacity of the device is suitable for storing the food or medicine you wish to cool.
6 Technical description
6.1 Function description
The refrigerator is suitable for use with a 12 V or 24 V DC voltage and can therefore also be used e.g. for camping or on boats.
When used on boats the refrigerator can be subjected to a constant inclination of 30^ .
The refrigerator can chill products down to +0 ^ C to +10 ^ C and keep them cool. In the freezer compartment, frozen items can be stored at -18 ^ C to 0 ^ C . You can use the adjustable temperature control to set the desired temperature.
All materials used in the refrigerator are compatible for use with foodstuffs. The refrigerant circuit is maintenance-free.
6.2 Control elements
| No. in fig. 1, page 3 | Description |
| 1 | Shelf |
| 2 | Type plate (inside) |
| 3 | Fruit and vegetable compartment |
| 4 | Freezer compartment |
| 5 | Condenser and compressor (on the back) |
| 6 | Bottle holder |
| 7 | Door compartment |
| 8 | Inner lighting |
| 9 | Temperature controller |
7 Installing and connecting the refrigerator
Please note the following instructions for installation on boats:
DANGER!
If the device is powered by the mains, ensure that the power supply has a residual current circuit breaker.
NOTICE!
The device can be tilted sideways up to 30^ . When setting up the refrigerator, note that it must be fastened to take account of this. If you have any questions regarding installation, consult your specialist dealer.
7.1 Changing the door hinge
You can also change the hinge of the doors, so that the doors open to the left rather than the right.
Unscrew and remove the top bolts (fig. 2 1, page 3).
Remove the upper door (fig. 2 page 3).
Remove the spacer (fig. 2 3, page 3).
Remove the middle hinge (fig. 3 1, page 3).
Remove the lower door (fig. 3 2page 3).
Unscrew and remove the bottom bolts (fig. 4 1, page 4).
On the opposite side:
Fasten the bottom bolts.
Attach the lower door.
Fasten the middle hinge firmly.
Fit the spacer.
Attach the upper door.
Fasten the top bolts.
7.2 Installing the refrigerator
Observe the following instructions when installing:
- Install the refrigerator so that the warm air produced can easily flow away (either upwards or to the sides, fig. 5, page 4).
Key for fig. 5, page 4
| No. | Explanation |
| 1 | Cold intake air |
| 2 | Hot waste air |
| 3 | Spacing above the refrigerator if there is not sufficient air to circulate above or at the side. |
- Leave the device to stand for at least four hours before you connect it to the power supply so that the oil can flow back into the compressor.
Proceed as follows to install the refrigerator:
Shorten the sealing strip if required and fit it on the refrigerator (fig. 6, page 5).
Install the refrigerator as shown in the illustrations (fig. 7, page 5 to fig. 16, page 6).
Please note the following:
- fig. 8, page 5: You can make sure that the space between the refrigerator and the installation opening is right by using the bottom hinge cover.
- fig. 11, page 6: Remove the DX part for right-hand hinges and the SX part for left-hand hinges.
Fix the cover panel to the refrigerator door as shown in the illustrations (fig. 17, page 7 to fig. 22, page 7).
7.3 Connecting the refrigerator to the power supply
NOTICE!
- To avoid voltage drops and loss of performance, keep the connection cable as short as possible and not be interrupted. Therefore avoid additional switches, plugs or power strips.
- Disconnect the cooling device and other electric consumers from the battery before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
The refrigerator can be operated with a 12V = = or 24V = = voltage supply.
For safety reasons, the refrigerator is equipped with an electronic system to prevent the polarity being reversed. This protects the refrigerator against reversed polarity when connecting to a battery and against short circuiting.
To protect the battery, the refrigerator switches off automatically if the voltage is insufficient (see table below).
| 12 V | 24 V | |
| Cut-off voltage | 10.4 V | 22.8 V |
| Cut-in voltage | 11.7 V | 24.2 V |
Determine the required cross section of the cable in relation to the cable length according to fig. 23, page 8.
Key for fig. 23, page 8
| Coordinate axis | Meaning | Unit |
| l | Cable length | m |
| ∅ | Cable cross section | mm2 |
NOTICE!
Make sure the polarity is correct.
Before starting up the device for the first time, check whether the operating voltage and the battery voltage match (see type plate).
Connect the refrigerator
- as directly as possible to the poles of the battery or
- to a plug socket which is fuse protected with at least 15 ~A (at 12 ~V ) or 7.5 ~A (at 24 ~V ).
8 Using the refrigerator
NOTE
Before starting your new refrigerator for the first time, you should clean it inside and outside with a damp cloth for hygienic reasons (please also refer to the chapter "Cleaning and maintenance" on page 26).
8.1 Energy saving tips
- Choose a well ventilated location which is protected from direct sunlight.
- Allow warm food to cool down first before placing it in the device to keep cool.
- Do not open the refrigerator more often than necessary.
- Do not leave the doors open for longer than necessary.
- Defrost your refrigerator as soon as a layer of ice forms.
- Avoid unnecessarily low temperature settings.
- Clean dust and dirt from the condenser at regular intervals.
8.2 Using the refrigerator
The fridge conserves fresh foodstuffs. You can also conserve frozen foodstuffs in the freezer compartment.
CAUTION! Health hazard!
- Never put any items back in the freezer compartment which have started defrosting or have been defrosted; consume them as soon as possible.
- Make sure that you only put items in the cooler which may be kept at the selected temperature.
NOTICE!
Ensure that food or liquids in glass containers are not excessively refrigerated.
Liquids expand when they freeze and can therefore destroy glass containers.
Switch the refrigerator on by turning the temperature control (fig. 1 9 page 3) away from the "0" position.
After switching on, the refrigerator requires approx. 180 seconds until the compressor starts up.
Setting the temperature
You can set the temperature to any level using the temperature control (fig. 1 9, page 3). The built-in thermostat regulates the temperature as follows:
- 1 = lowest cooling capacity
- 6 = highest cooling capacity
Generally, a setting in the middle is the most suitable.
NOTE
The cooling performance can be affected by:
- the ambient temperature
the amount of food to be conserved
the frequency with which the door is opened.
Conserving foodstuffs
You can conserve foodstuffs in the refrigerator. The time for which the food can be conserved in this way is usually stated on the package.
NOTICE!
Do not conserve warm foodstuffs in the refrigerator.
Do not place glass containers containing liquid in the freezer compartment.
Observe the temperature information and best before date on the food packaging.
Observe the following when using the refrigerator:
- Never re-freeze products which have started defrosting or have been defrosted; consume them as soon as possible.
- Food which can easily absorb tastes and odours and liquids and products with a high alcohol content should be conserved in air-tight containers.
- Wrap food in aluminium foil or cling film and shut in a suitable box with a lid. This ensures that aromas, the shape and the freshness will be better conserved.
8.3 Dividing the interior space
You can divide the interior space of the refrigerator variably by arranging the shelves and the door compartments according to your needs.
Arranging the shelves (fig. 24, page 8)
Lift the shelf up at the back and pull it towards the front until the front part slides out of the guides.
Lift the shelf and pull it out completely while tilted slightly.
Select the required position and guide the shelf back in by proceeding in the reverse sequence.
Arranging the door compartments (fig. 25, page 9)
Press the door compartments into the required position.
8.4 Regulating the humidity
You can regulate the humidity for the fruit and vegetable compartment. To do this you can open or close the ventilation grille in the shelf above the fruit and vegetable compartment (fig. 26, page 9):
Open the ventilation grille (1) to reduce the humidity level.
Close the ventilation grille (1) to increase the humidity level.
8.5 Replacing the interior light
If the interior light in the refrigerator is faulty, you can change the bulb (LED bulb, E14, 12/24 V, 1.2 W).
To do this, proceed as follows (fig. 27, page 10):
Disconnect the power supply.
Take off the cover.
Screw the bulb out of the socket.
Screw the new bulb into the socket.
Remount the cover.
Reconnect the refrigerator to the power.
8.6 Defrosting the refrigerator
NOTE
In high ambient temperatures, the refrigerator may operate continuously, which can lead to excessive formation of frost on the rear wall of the refrigerator compartment. If this is the case, turn the temperature control (fig. 1 9, page 3) down to a lower level ("1" or "2").
Humidity can cause frost to form in the interior of the refrigerator or on the vaporiser. This reduces the cooling capacity. The refrigerator compartment is defrosted automatically while the compressor is not running.
A slight layer of frost or water droplets could form in the interior of the refrigerator if it has been cooling for longer periods. This is normal because the moisture in the air condenses to water when the temperature in the refrigerator drops. The refrigerator is not defective.
The condensate drains away through a trough into a special container at the back of the unit via the compressor, where it evaporates.
Wipe the insides of the refrigerator with a dry cloth as required.
If the layer of frost is thicker than 3mm , you should defrost the freezer compartment.
Defrosting the freezer compartment
NOTICE!
Never use hard or sharp tools to remove ice or to free objects frozen onto the device.
This can damage the refrigerator.
To defrost the freezer compartment, proceed as follows:
Empty the contents.
If necessary, put them in another cooling device to keep them chilled.
Disconnect the power supply.
Leave the ice to defrost.
Once the ice has melted completely, clean the refrigerator (see chapter "Cleaning and maintenance" on page 26).
Reconnect the refrigerator to the power.
Run the refrigerator for approx. three hours at level "5".
Place the goods for cooling into the refrigerator.
Set the temperature control to the desired level.
8.7 Switching off and storing the refrigerator
If you do not intend to use the refrigerator for a long time, proceed as follows:
Switch the refrigerator off by turning the temperature control (fig. 1 9 page 3) to the "0" position.
Disconnect the connection cable from the battery or pull the DC cable plug out of the rectifier.
Clean the refrigerator (see chapter "Cleaning and maintenance" on page 26).
Leave the door slightly open.
This prevents smells from building up.
9 Cleaning and maintenance
WARNING!
Always disconnect the refrigerator from the mains before you clean and service it.
NOTICE!
- Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the refrigerator.
- Never use hard or sharp tools to remove ice or to free objects frozen onto the device.
- Do not use any mechanical tools or any other tools to speed up the defrosting process.
Clean the refrigerator regularly and as soon as it becomes dirty with a damp cloth.
Make sure that no water drips into the seals. This can damage the electronics.
Wipe the refrigerator dry with a cloth after cleaning.
Check the condensate drain regularly.
Clean the condensate drain when necessary. If it is blocked the condensate collects on the bottom of the refrigerator.
The condensate drain is located at the back, above the fruit and vegetable compartment. To clean the condensate drain (fig. 28 1, page 10), use the cleaning tool (fig. 28 2, page 10) located in the drain opening.
Regularly clean the door seals.
Clean the grid of the condenser and the compressor on the back of the device with a brush.
10 Warranty
The statutory warranty period applies. If the product is defective, please contact the manufacturer's branch in your country (see the back of the instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following documents when you send in the device:
- A copy of the receipt with purchasing date
- A reason for the claim or description of the fault
11 Disposal
WARNING! Children beware!
Before disposing of your old refrigerator:
- Dismantle the drawers.
- Leave the shelves in the refrigerator so that children cannot climb inside.
NOTICE!
An insulating gas is used in the device (see type plate). Check with the relevant local government authority or your local waste disposal company about proper disposal and make sure that the device and all materials are disposed of professionally.
Place the packaging material in the appropriate recycling waste bins wherever possible.
If you wish to finally dispose of the product, ask your local recycling centre or specialist dealer for details about how to do this in accordance with the applicable disposal regulations.
12 Troubleshooting
Compressor does not run
| Fault | Possible cause | Remedy |
| UTERM=0 V | There is an interruption in the battery-electronics connection | Establish a connection |
| Main switch faulty (if installed) | Replace the main switch | |
| Additional supply line fuse has blown (if installed) | Replace the supply line fuse | |
| UTERM≤UON | Battery voltage is too low | Charge the battery |
| Start attempt with UTERM≤UOFF | Loose cables | Establish a connection |
| Poor contact (corrosion) | ||
| Battery capacity too low | Replacing the battery | |
| Cable cross section too small | Change the cable (see table on page 19) | |
| Start attempt with UTERM≥UON | Ambient temperature too high | - |
| Insufficient ventilation | Move the refrigerator to another location | |
| Condenser is dirty | Clean the condenser | |
| Fan defective (if installed) | Replace the fan | |
| Electric circuit between the pins in the compressor interrupted | Defective compressor | Replace the compressor |
U_TERM Voltage between the positive and negative terminals of the electronics
U_ON Cut-in voltage of the electronics
U_OFF Cut-off voltage of the electronics
Interior temperature too low at control level "1"
| Fault | Possible cause | Remedy |
| Compressor runs constantly | Thermostat sensor has no contact to the vaporiser | Secure the sensor |
| Short circuit in the thermostat line Thermostat defective | Change the thermostat | |
| Compressor runs for a long time | Large quantities have been frozen in the freezer compartment | - |
Poor cooling, increase in interior temperature
| Fault | Possible cause | Remedy |
| Compressor runs for a long time/continuously | Vaporiser is iced over | Defrost the vaporiser |
| Ambient temperature too high | - | |
| Insufficient ventilation | Move the refrigerator to another location | |
| Condenser is dirty | Clean the condenser | |
| Fan defective (if installed) | Replace the fan | |
| Compressor does not run often | Battery capacity exhausted | Charge the battery |
Water in or under the refrigerator
| Fault | Possible cause | Remedy |
| Water is leaking into the inside of the refrigerator. | The water drain duct is clogged. | Clean the drain. |
| Foodstuffs are preventing the water from flowing to the collector. | Make sure that foodstuffs do not touch the rear wall. | |
| Water is leaking onto the floor. | There is too much water in the air deflector. | Clean the air deflector. |
Unusual noises
| Fault | Possible cause | Remedy |
| Loud humming | A component of the refrigerant circuit cannot move freely (touching the wall) | Bend the component carefully away from the obstruction |
| There is a foreign object stuck between the cooling unit and the wall | Remove the foreign object | |
| Fan noise (if installed) | - |
13 Technical data
| HDC 275 | |
| Ref. no.: | 9105204439 |
| Refrigerator compartment capacity: | 202 l |
| Freezer compartment capacity: | 75 l |
| Connection voltage: | 12 V---or 24 V--- |
| Mean power consumption: | 61 W |
| Power consumption at 25 °C/32 °C: | 3.3 Ah/h / 5.1 Ah/h |
| Cooling temperature range | |
| Refrigerator compartment: | 0 °C to +10 °C |
| Freezer compartment: | -18 °C to 0 °C |
| Capacity: | 277 l |
| Climatic class: | ST(+16 °C to +38 °C) |
| Relative humidity: | maximum 90 % |
| Constant inclination: | maximum 30° |
| Coolant quantity: | 180 g |
| CO2 equivalent: | 0.257 t |
| Global warming potential (GWP): | 1430 |
| Dimensions: | see fig. 29, page 10 |
| Weight: | Approx. 52 kg |
| Inspection/certification: | CE |
The refrigerant circuit contains R134a.
Contains fluorinated greenhouse gases
Hermetically sealed equipment
6 Description technique
Dometic Australia Pty. Ltd.
1 John Duncan Court
Varsity Lakes QLD 4227
雪 1800212121
+61755076001
Mail: sales@dometic.com.au
AUSTRIA
Dometic Austria GmbH
Neudorferstraße 108
A-2353 Guntramsdorf
雪 +432236908
+43223690807060
Mail: info@dometic.at
BENELUX
Domatic Branch Office Belgium
Zincstraat 3
B-1500 Halle
+3223598040
+3223598050
Mail: info@dometic.be
BRAZIL
Domatic DO Brasil LTDA
Avenida Paulista 1754, conj. 111
SP 01310-920 Sao Paulo
+551132513
+551132513362
Dometic Group Asia Pacific
Suites 2207-11 · 22/F-Tower 1
The Gateway 25 Canton Road
Tsim Sha Tsui · Kowloon
+85224611386
+85224665553
Mail: info@waeco.com.hk
HUNGARY
Dometic Zrt. Sales Office
Kerékgyartóu.5
H-1147 Budapest
+3614684400
+3614684401
Domatic Italy S.r.l.
Via Virgilio, 3
I-47122 Forli (FC)
+390543754901
+390543754983
Mail: vendite@dometic.it
JAPAN
Domic KK
Maekawa-Shibaura, Bldg. 2
2-13-9 Shibaura Minato-ku
Tokyo 108-0023
雪 +81354453333
+81354453339
Mail: info@dometic.jp
MEXICO
Circuito Médicos No. 6 Local 1
Colonia Ciudad Satélite
CP 53100 Naucalpan de Juarez
Estado de Mexico
+525553744108
+525553934683
Mail: info@dometic.com.mx
NETHERLANDS
Domic Berelux B.V.
Ecustraat 3
NL-4879 NP Etten-Leur
雪+31765029000
+31765029019
Mail: info@dometic.nl
NEW ZEALAND
Domatic New Zealand Ltd.
PO Box 12011
Penrose
Auckland 1642
+6496221490
+6496221573
Mail: customerservices@dometic.co.nz
NORWAY
Dometic Norway AS
Osteroyveien 46
N-3232 Sandefjord
+4733428450
+4733428459
Mail: firmapost@dometic.no
POLAND
Dometic Poland Sp. z o.o.
UI. Puławska 435A
PL-02-801 Warszawa
+48224143200
+48224143201
Mail: info@dometic.pl
PORTUGAL
Dometic Spain, S.L.
Komsomolskaya square 6-1
RU-107140 Moscow
+74957807939
+74959165653
Mail: info@dometic.ru
SINGAPORE
Dometic Pte Ltd
18 Boon Lay Way 06-140 Trade Hub 21
Singapore 609966
+6567953177
+6568626620
Mail: dometic@dometic.com.sg
SLOVAKIA
Domatic Slovakia s.r.o. Sales Office Bratislava
Nadražná 34/A
900 28 Ivanka pri Dunaji
雪/+421245529680
Mail: bratislava@dometic.com
SOUTH AFRICA
Domatic (Pty) Ltd.
Regional Office
South Africa & Sub-Saharan Africa
2 Avalon Road
West Lake View Ext 11
Modderfontein 1645
Johannesburg
+27114504978
+27114504976
Mail: info@dometic.co.za
SPAIN
Domatic Spain S.L.
Avda. Sierra del Guadarrama, 16
E-28691 Villanueva de la Canada
Madrid
+34918336089
+34900100245
Mail: info@dometic.es
SWEDEN
Dometic Scandinavia AB
Gustaf Melins gata 7
S-42131 Västra Frolunda
+46317341100
+46317341101
Mail: info@dometicgroup.se
SWITZERLAND
Dometic Switzerland AG
Riedackerstrasse 7a
CH-8153 Rumiang
+41448187171
+41448187191
Mail: info@dometic.ch
UNITED ARAB EMIRATES
Dometic Middle East FZCO
P.O.Box17860
S-D 6, Jebel Ali Freezone
Dubai
+97148833858
+97148833868
Mail: info@dometic.ae
UNITED KINGDOM
Dometic UK Ltd.
Dometic House, The Brewery
Blandford St. Mary
DorsetDT119LS
+443446260133
+443446260143
Mail: customerservices@dometic.co.uk
USA
Dometic RV Division
1120 North Main Street
Elkhart, IN 46515
+1574-264-2131