USB 3.0 HUB - USB Hub US ROBOTICS - Free user manual and instructions
Find the device manual for free USB 3.0 HUB US ROBOTICS in PDF.
User questions about USB 3.0 HUB US ROBOTICS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your USB Hub in PDF format for free! Find your manual USB 3.0 HUB - US ROBOTICS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. USB 3.0 HUB by US ROBOTICS.
USER MANUAL USB 3.0 HUB US ROBOTICS
The USB 3.0 Hub is compliant with USB 3.0 specifications. The hub lets your connect up to 4 USB 3.0 devices to your computer, such as MP3 players, digital cameras, external USB drives, or USB printers.
Features
- Compatible with USB 3.0 specification.
- Self-powered
1 upstream and 4 downstream USB ports. Plug-and-Play
Package Contents
- USB 3.0 4-port Hub - USB 3.0 Cable
Power Adapter
System Requirements
An available USB port
Installation
- Connect the supplied USB 3.0 cable to the back of the hub.
- Connect the other end of the USB 3.0 cable to an available USB port on your computer.
- Connect the supplied Power Adapter to the hub.
- The computer will detect the device and install it automatically.
This product is subject to the U.S. Robotics Corporation Limited Warranty. To view a copy of the Limited Warranty and for information on how to contact U.S. ROBOTICS Technical Support, please see the U.S. ROBOTICS corporate web site at:
www.usr.com/support
Specifications
Compliant with Universal Serial Bus 3.0 Specification.
Supports the following speed data rates:
Low-speed (1.5 Mbps) High-speed (480 Mbps)
Full-speed (12 Mbps) Super-speed (5 Gbps)
1 upstream port and 4 downstream ports
Power:
Self-Power: 5V 4A
Adapter: O Input: 100 240V / 50Hz 60Hz O Output: 5V 4A
Supports all USB compliant data transfer types:
Control Interrupt Bulk Isochronous transfer
Storage Temperature
-10~85 degrees
Working Temperature
0~40 degrees
Regulatory
FCC Conditions
This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received. Including interference that may cause undesired operation.
CE
This equipment is in compliance with the requirements of the following regulations: EN 55 022:CLASS B
WEEE Information
For EU (European Union) member users: According to the WEEE (Waste electrical and electronic equipment) Directive, do not dispose of this product as household waste or commercial waste. Waste electrical and electronic equipment should be appropriately collected and recycled as required by practices established for your country. For information on recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product.
FRANÇAIS
Super-speed (5 Gbits/s)
