MDV 1000 - Car radio Trevi - Free user manual and instructions
Find the device manual for free MDV 1000 Trevi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Radio / Car Stereo |
| Brand | Trevi |
| Model | MDV 1000 |
| Installation Type | 1-DIN (Single DIN) for standard dashboards |
| Maximum Output Power | 4 x 45 W (peak) |
| RMS Output Power | 4 x 20 W (approx.) |
| Radio Tuner | FM/AM, digital PLL synthesization |
| Tuner Presets | 30 FM stations + 12 AM stations |
| Audio Playback | CD, CD-R, CD-RW, MP3, WMA |
| USB Input | Yes, on the front panel for USB drives and charging |
| Auxiliary Input (AUX) | Yes, 3.5 mm jack on the front panel |
| Bluetooth | Yes, hands-free calling and audio streaming |
| Display | LCD with blue illumination |
| Remote Control | Included, with dedicated buttons |
| Dimensions (W x H x D) | 188 x 58 x 160 mm |
| Weight | 1.15 kg |
| Power Supply | 12V DC (negative ground), typical car battery |
| Safety Features | Built-in fuse and overheating protection |
| Maintenance | Clean with a soft, dry cloth; avoid abrasive cleaners |
| Spare Parts | Available from authorized Trevi service centers |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - MDV 1000 Trevi
How do I set the clock on the Trevi MDV 1000?
Press and hold the CLK button (or preset button 6) until the time display flashes. Use the volume knob to adjust the hour, then press again to set minutes. Confirm by pressing the knob or CLK.
How can I store my favorite radio stations in memory?
Tune to the desired station using TUNE or SEEK. Press and hold one of the preset buttons (1-6) for about 2 seconds until you hear a beep. Repeat for each station.
How do I connect and play music from a USB drive?
Insert your USB drive into the USB port on the front panel. The unit automatically switches to USB mode. Use the playback controls to navigate and play MP3 or WMA files.
What audio formats are compatible with this car radio?
The Trevi MDV 1000 supports CD audio, MP3, and WMA files. For USB drives, it also supports these formats. Always ensure the files are not corrupted and the media is correctly formatted.
How can I reset the device to factory settings?
Press the RESET button (usually a small pinhole on the front panel) with a pen tip. This restores factory defaults. Alternatively, remove the front panel and disconnect the car battery for a few minutes.
Can I adjust the bass and treble levels?
Yes, press the MENU or SEL button repeatedly to cycle through sound settings such as Bass, Treble, Balance, and Fader. Rotate the volume knob to adjust the selected parameter.
What should I do if the car radio does not turn on?
Check the vehicle fuse and the wiring connections first. Ensure the ignition key is in the accessory position. If it still doesn't work, check the built-in fuse on the rear panel and replace it if necessary.
Is there a detachable front panel for security?
Yes, the front panel can be released by pressing the RELEASE button. Remove it whenever leaving the car to prevent theft. Store it in the protective case provided.
How do I adjust the clock display format (12/24-hour)?
While setting the clock, press the DISP or CLK button repeatedly to toggle between 12-hour and 24-hour formats. The selected format is saved after exiting the setting mode.
Can I use this car radio with all vehicle types?
The unit is designed for vehicles with a 12V DC electrical system and a negative ground. If your vehicle uses positive ground, a conversion is necessary. Check compatibility before installation.
User questions about MDV 1000 Trevi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car radio in PDF format for free! Find your manual MDV 1000 - Trevi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MDV 1000 by Trevi.