VT8815 - Fan SOLAC - Free user manual and instructions

USER MANUAL VT8815 SOLAC

• Read these instructions carefully before using your appliance, and keep them for future reference.
• Check that the voltage on the specifications plate matches the mains voltage in your home.
• Remove all elements used for protection during transport or for sales promotions, such as paper or plastic bags, plastic sheets, cardboard and stickers from inside or outside the appliance.
• Do not introduce any object inside the appliance. Position the appliance away from objects that could penetrate the grilles.
• Never immerse the appliance in water or any other liquid. Do not put near a bathtub, shower or swimming pool.
• Do not position the device near an open flame or inflammable gases.
• Do not place the cable under carpets or any other kind of material.
• While the appliance is in operation, keep out of reach of children, animals and disabled people. If the appliance is used in their presence, keep a watchful eye on such operations.
• The appliance is destined solely for home use; it may not be used for industrial purposes.
• Unplug when not in use.
• If the appliance does not work properly or if the power cable is damaged, take it to a Specialised Technical Service Centre.
• Before starting the appliance, check that it is on a stable surface and is in its normal operating position (on its base).

WARNING!!: When you want to dispose of the appliance, NEVER throw it in the bin. Take it to your nearest RECYCLING POINT or waste collection centre for treatment. If you do that, you will be helping to look after the environment.

MAIN COMPONENTS

1. Front grille
2. Hood
3. Blades
4. Ring
5. Shaft protector

6. Rear grille

7. Motor shaft

8. Connecting ring

9. Safety screw

10. Oscillation button

11. Speed regulator

12. Carry handle
13. Base
14. Base attachment screw

ASSEMBLY

1. Fit the motor shaft (7) into the base (13) (Fig. 1) and join both parts using the base attachment screw (14) (Fig. 2)
2. Unscrew and remove the hood (2) and ring (4) from the motor shaft (7), and also remove the shaft protector (5).
3. Fit the rear grille (6) over the shaft (7) so that the projections on the motor shaft coincide with the orifices on the rear grille (6) (Fig. 3). Fix the grille to the shaft using the ring (4), tightening it in a clockwise direction.
4. Insert the blades (3) and lock them in place by turning the hood (2) anticlockwise (Fig. 4). Check that they turn correctly.
5. Mount the front grille (1) using the guide on the connecting ring (8). You will hear a "click". Proceed to tighten the safety screw (9). (Fig. 5)

OPERATING INSTRUCTIONS

• Turn the regulator control to select the desired speed. The VT8805 model has 2 speed settings, while the VT8810 and VT8815 models have 3 speed settings.
• The fan can be turned off by turning the regulator control to position 0.
• The fan will oscillate automatically when the button (10) is pressed; pull the oscillation button (10) gently to stop the oscillation. To resume the oscillating function, simply press this button again.
• The fan may also be inclined at an angle of 45^ to the vertical. Adjust this inclination pressing gently on the upper part of the motor shaft (7), forwards or backwards.

CLEANING AND MAINTENANCE

• Your appliance must be disconnected from the mains before any cleaning operation is performed.

• Clean with a slightly damp cloth.

• Never immerse the appliance in water or any other liquid. Check that no drops of liquid enter the motor area.
• Do not use solvents or abrasive cleaners to clean the device, since they could damage its plastic parts.
• When the appliance is not in use it should be kept in a damp-proof location.

ATTENTION

MEGFELELOSESIGNYILATKOZAT